Electrolux BCFW102 User Manual

RANGE

COMPOSITION

Chilling means bringing the temperature of

cooked food from +90ºC to +3°C in a short
time lap to minimize bacteria proliferation and
avoid loss of food consistency and texture.
The ZANUSSI easyChill Blast
Chillers/Freezers reduce temperature to
+3°C at food core in less than 90 minutes
and down to -18°C in less than four hours.
After the Blast Chilling a holding cycle starts
automatically to respectively maintain food at
+3°C and -18°C. Blast freezed food has a
solid 6 months/1 year shelf life without loss of
flavour, nutritional values and weight. The
opportunity to prepare in a single shot the
food to be used in different times during the
week enables a better work scheduling and
therefore a sensible reduction in labour costs.

BLAST CHILLER/FREEZERS 70kg - 10 2/1 GN

FUNCTIONAL AND
CONSTRUCTION
FEATURES

� Cruise cycle : the chiller

automatically drives the chilling
process to maintain the food quality
and reduce where possible the total
chilling time (it works by food probe).

� Soft Chilling (Air temperature

–2°C).

� Hard Chilling (Air temperature

–20°C).

� All the probe-driven cycles feature

ARTE (Algorithm for Remaining
Time Estimation) : the machine
displays the actual time needed to
end the cycle and to make planning
the activities easier.

� Holding at +3°C (automatically

activated at the end of each cycle).

� Turbo cooling: the chiller works

continuously at the desired
temperature. Ideal for continuous
production and for pastry application.

� Automatic recognition of the

insertion of the food probe (cycles
piloted either by food probe

ZANUSSI easyChill

temperature or by time)

� The control unit provides several

operating settings: time/core
temperature according to NF and UK
regulations, time/air
temperature/probe personalised
according to national regulations,
sterilizing cycle: UV lamps built-in
(on request), 3 single sensor core
temperature probes (as accessory),
ideal for meats, automatic defrosting
and manual defrosting. All
parameters are programmable.

� 3-sensor core probe as standard.
� The control unit provides two large

displays to read out: time, core
temperature, residual time, alarms,
service information.

� Two customizable cycles (P1 &

P2) for each operating mode,
allowing to set the time and air
temperature. These programs can
be converted into ice-cream
specialized cycles (shape
maintainance and holding).

ZANUSSI

P R O F E S S I O N A L

TECHNICAL DATA
CHARACTERISTICS MODELS

Type Blast freezer - 70

Productivity per cycle - kg.
NF Regulations - chilling / freezing 50.4, 50.4
UK Guide lines - chilling / freezing 70, 70
Cooling unit Built-In
Control type Electronic
Thermostat Electronic
Thermometers Digital
External dimensions - mm
width 1250
depth/with open doors 993
height 1730
N° and type of door 1
Door hinges Left
Trays type GN 2/1
Max load capacity - trays h 65 mm - n° 10
Compressor power - HP 3,9;
N° defrost in 24 hrs. 3/30'
Refrigerant type R404a
Refrigerant quantity - g. 5480
Refrigeration power - W 11319
Refrigerant power
at evaporation temperature - °C -25
Power - kW
installed-electric 4.37
Net weight - kg. 320

INCLUDED ACCESSORIES

SLIDE-IN RACK SUPP.10 2/1 BC+BCF
70KG-LW

BCFW102

110099

kg

1

BLAST CHILLER/FREEZERS 70kg - 10 2/1 GN

ZANUSSI easyChill

� Chilling and freezing times can

vary according to food quantity,
density, moisture contents and type
of containers.

� Internal and external finishing in

304 AISI stainless steel and
backpanel in galvanized steel.

� HCFC, CFC and HFC free

insulation (Cyclopentane), HCFC
and CFC free refrigerant gas
(R404a).

� Developed and produced in ISO

9001 and ISO 14001 certified
factory.

� Inner cell with rounded corners.
� Door equipped with removable

magnetic gasket with hygienic
design.

� Evaporator with antirust

protection.

� Ventilator swinging panel foreasy

access to the evaporator.

� Automatic heated door frame.
� Hot gas defrosting system.
� Thermostatic expansion valve to

optimize the cooling unit efficiency.

� Adjustable feet 150 mm high.
� Stand alone printer as accessory.
� PC connection as accessory, gate

RS 485.

� No water connections required:

Waste water can be plumbed into
drain, but can also be collected in an
optional waste container.

OPTIONAL ACCESSORIES
ACCESSORIES MODELS

1 SINGLE SENSOR PROBE CHILLER+C/FREEZER 880089
2 SINGLE SENSOR PROBES CHILLER+C/FREEZER 880096
3-SENSOR PROBE FOR CHILLER+C/FREEZER 880088
KIT 3 SINGLE SENSOR PROBES FOR BC/BCF 880269
KIT 6 WHEELS FOR BLAST C/FREEZER 70KG-US 880141
KIT HACCP ADVANCED CONNECT. BC/BCF LW+CW 880183
KIT HACCP EKIS 922166
PASTRY(400X600)RACK+WHEELS-80MM,10 2/1LW 922067
PRINTER FOR HACCP BASIC VERSION 881532
TRAY RACK+WHEELS 10 GN 2/1,65MM PITCH-LW 922043
TRAY RACK+WHEELS 8 GN 2/1,80MM PITCH-LW 922045
TROLLEY FOR SLIDE-IN RACK 10 GN 2/1-LW 922042

DCBB4 2009-09-23 The Company reserves the right to alter technical specifications without prior notice.

BCFW102

110099

ZANUSSI

P R O F E S S I O N A L

www.zanussiprofessional.com