Electrolux 504216 (WT65H208WS), 504217 (WT65H240WS) General Manual
ITEM # _______________________________________________
MODEL # _____________________________________________
Warewashing
Hood Type Dishwasher with
Continuous Water Softener WT65
Hood Type Dishwasher with
Continuous Water Softener WT65
504216 (WT65H208WS) Hood Type Dishwasher with
continuous water softener- 208 V
504217 (WT65H240WS) Hood Type Dishwasher with
continuous water softener - 240 V
Short Form Specification
Item No. ___________________________________
Unit shall be Electrolux WT65 upright hood type hot water sanitizing
dishmachine with built in continuous water softener. Electrical characteristics to be ___208 or ___240 volts three phase operation with four automatic cycles of 60/70/120 seconds and infinte cycle using 1 gallon of
softened 180 °F final rinse water per rack. Rinse temperature and pressure guaranteed by built in 40 °F rise hot water booster heater and built in
rinse booster pump. Washing performance is guaranteed by a powerful 2
HP wash pump, upper and lower stainless steel revolving washing spray
arms. 304 Stainless steel construction to include hood, frame, wash tank,
insulated booster tank and side panels. Unit shall be field convertible from
straight to corner operation. The unit shall include drain pump, detergent
and rinse aid dispenser pumps and built in rinse aid container. Double
skinned and insulated hood construction for energy saving and quite operation. Confortable front loading of water softener regeneration salt.
Covered by Electrolux Platinum Star™ Service Program two-year parts
and one-year labor warranty, installation start-up and performance checkup after one year from installation.
PROJECT NAME # ______________________________________
SIS # _________________________________________________
AIA # _________________________________________________
Main features
• Built-in booster heater sized to raise incoming 120 °F water to
180 °F minimum for sanitizing rinse. No external booster is required.
• Constant temperature above 180 °F thoughout the rinsing cycle thereby
ensuring that NSF mandated temperatures are maintained.
• Unique temperature interlock guarantees required sanitizing temperatures
in both the wash and final rinse.
• Requires only 1 gallon of water per rack.
• Maximum capacity of 60 racks per hour.
• 60/70/120 seconds and infinite totally automatic cycle.
• Two built in resin containers automatically alternate during regeneration to
provide non stop washing.
• Regeneration of resins activated automatically with no operator intervention.
• 100% of final rinse water is softened with no pressure drop to ensure full
detergent removal and sanitization of washed items.
• Comfortable front loading of regeneration salts.
• Automatic fill of wash tank to be recirculated during each wash cycle.
• Automatic start on hood closure.
• Automatic cycle.
• Rinse cycle refreshes wash water and tank heat.
• Cycle may be interrupted at any time by door opening.
• Heavy duty Stainless steel construction.
• Internal cavity as well as exterior panels are all 304 series Stainless steel.
• Utilizes fresh softened hot water sanitizing rinse.
• Double skinned hood construction with sound insulation for quiet operation.
• Special designed Stainless steel nozzles provide superior cleaning action.
• Revolving Stainless steel wash/rinse arms above and below the rack.
• Interchangeable wash/rinse arms screw out for simple clean up.
• Primary and secondary strainers for enhanced soil filtering.
• Height adjustable feet.
• State-of-the-art electronic controls with built-in programming, self-
diagnostics for serviceability and automatic interior rinse-down cycle.
• Digital read-out keeps operator informed as to cycle status as well as
temperatures.
• Element protection from dry fire and low water.
• Detergent / rinse additive signal connection box.
• Utilizes standard 20″ by 20″ racks for ease of operation
(one pegged and one flat rack included).
• Separate drain pump controls water level in the wash tank as well as
machine draining.
• 16-1/16″ door opening accepts 18″ trays.
• Field convertible from straight to corner operation.
• Equipped with 6-foot flexible fill and drain hoses.
• 2 HP three phase type motor.
• 208 V/3p/60Hz or 240 V/3p/60Hz electrical specification.
Hood Type Dishwasher with Continuous Water Softener WT65
Warewashing
Approval: ___________________________________________
Electrolux Professional, Inc.
3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789
www.electroluxusa.com/professional
Warewashing
Hood Type Dishwasher
with Continuous Water Softener WT65
Front View
Top View
Electric
Supply voltage:
504216 (WT65H208WS) 208 V/3p/60Hz - 40A
504217 (WT65H240WS) 240 V/3p/60Hz - 32A
Total Watts: 13.6 kW
Booster heating elements: 12 kW
Tank heating elements: 3 kW
Wash pump size: 2 hp
Water
Water supply pressure: 7.25 – 101 psi (50 – 700 kPa)
Water supply temperature: 120 °F (50 °C)
Colder incoming water supply
may lengthen wash cycle time.
Water supply hardness: 400 ppm (40 °fH) MAX
Concentration of chlorides
in water: < 20 ppm
Gallons per cycle: 1 gallons (3.8 liters)
Gallons per hour: 60 gallons (227 liters)
(60 second cycle)
Initial fill water
consumption: 11 gallons (42 liters)
Booster Capacity: 3 gallons (12 liters)
Tank Capacity: 11 gallons (42 liters)
Incoming water line size: G ¾″
Drain line size: 0.7″ (18 mm) pumped drain
Maximum drain height: 39″ (1000 mm ) MAX
6 ft. Stainless steel flexible water fill hose included
6 ft. flexible drain hose included
Side View
Key Information
N° of cycles: 4 (60, 70, 120 seconds and infinite)
Racks per hour: 60 (60 second cycle)
Dishes per hour: 1080 (18 dishes/rack)
Wash temperature: 150 °F (66 °C) MIN
Rinse temperature: 180 °F (82.5 °C) MIN
Regeneration using coarse salt [NaCl]
Regeneration salt
tank capacity: 3.3 lb (1.5 kg)
Noise level: <65 dB
Door opening height: 16-1/16″
Net weight: 282 lb (128 kg)
Shipping weight: 360 lb (163 kg)
Shipping width: 33-1/16″ (840 mm)
Shipping depth: 36-5/8″ (930 mm)
Shipping height: 74-7/16″ (1890 mm)
Shipping volume: 52.25 cu.ft (1.48 m3)
Detergent and rinse aid dispensers included.
Rinse aid container included.
Warewashing
Hood Type Dishwasher with Water Softener WT65
The company reserves the right to make modifications to the products
without proir notice. All information correct at time of printing.
3-22-06
Loading...