Please read these operating instructions carefully and pay particular
attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and
pass it on to any future owners.
The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct
functioning of the appliance.
This symbol guides you, step by step, in the operation of the appliance.
The information marked with this symbol provides additional instructions and practical tips on the use of the appliance.
Tips and information about economical and ecological use of the
machine are marked with the clover symbol.
If you require assistance or advice on your appliance, please contact our
customer care department by letter or telephone:
Customer Care Department
AEG Domestic Appliances
55-77 High Street
Slough
Berkshire SL1 1DZ
Tel:08705 350350*
* calls to this number may be recorded for training
purposes.
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the
wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute
the wash load manually and select a spin programme. For more detailed information see the section headed "Something Not Working".
Printed on recycled paper.
People who think ecologically, act accordingly....
Your safety is of paramount importance, please ensure you read this
instruction book before installing or using this appliance.
General safety
• Repairs to the machine must be carried out only by qualified personnel. Repairs carried out by inexperienced persons could cause injury or
serious malfunctioning. Contact your local AEG Service Force Centre.
• Never start the machine if the mains cable is damaged or the control
panel or worktop are damaged allowing inner components to be
accessible.
• Unplug the appliance before carrying out any cleaning or maintenance operations.
• Never pull the mains cable to remove the plug from the socket;
always take hold of the plug itself.
• During high temperature wash programmes and during the drying
cycle, the door glass may get hot.
• Let the water cool down before carrying out emergency emptying or
before opening the door in an emergency.
Installation
• Follow the installation instructions carefully.
• Carry out a first wash without laundry (COTTONS 60, with half the
amount of detergent) in order to remove any manufacturing residue
from the tub and the drum.
6
Safety instructions
Child safety
• This appliance is designed to be operated by adults. Children should not
be allowed to tamper with the controls or play with the appliance.
• Pets and children have been known to climb into washing machines.
Please check the drum before use.
• Keep all packaging well away from children.
• Keep all detergents in a safe place out of children’s reach.
• When disposing of the appliance, cut off the mains cable, and destroy
the plug. Disable the door catch to prevent young children being
trapped inside.
During use
• Always unplug the appliance and turn off the water tap after use.
• This appliance is designed for domestic use only. If the machine is
used for any other purposes or is not used correctly, the manufacturer accepts no responsibility for any possible damage that might occur.
• For safety reasons, the appliance must not be modified.
• Use only detergents suitable for washing machines and follow the
manufacturer’s instructions.
• Garments which have been in contact with flammable solvents
should not be machine washed.
• Dyes and bleaching agents may only be used if specifically permitted
by the manufacturer of these products. We cannot be held liable for
any damage.
7
Disposal
Packaging materials
The materials marked with the symbol are recyclable.
This means that they can be recycled by disposing of them properly in
appropriate collection containers.
Machine
Use authorised disposal sites for your old appliance. Help to keep your
country tidy!
8
Tips for environmental protection
To save water, energy and to help protect the environment, we recommend
that you follow these tips:
• Normally soiled laundry may be washed without prewashing in order
to save detergent, water and time (the environment is protected too!).
• Use the energy saving programme when washing normally soiled garments.
• The machine works more economically if it is fully loaded (for both
washing and drying cycles).
• When small loads are washed, use only half to two thirds of the recommended amount of detergent.
• The machine will consume less energy if the laundry is adequatelyspun before being dried.
• With adequate pre-treatment, stains and limited soiling can be
removed; the laundry can then be washed at a lower temperature.
9
Main features of your washer-dryer
• Programme and temperature setting using the programme selector.
• Stain programme for effectively treating stained washing.
• Energy saving programme for normally soiled cotton items.
• Speed for the final spin can be reduced to 900, 700 or 500 rpm.
• RINSE HOLD: the laundry is left immersed in the final rinse water to
prevent creasing.
• Delay timer: programme start can be delayed by 1 to 24 hours (e.g.
to times with a more economical power rate).
• Programme progress display showing the programme steps selected
and the programme phase which is running.
• Because of its gentle washing action, the special wool cycle washes
your garments with extreme care.
• The drying programmes will enable you to have dry and soft laundry in a short time.
• 3-compartment drawer for detergent and fabric softener.
• Unbalance detection device: to prevent vibration during spinning.
10
Description of the appliance
Detergent drawer
Control panel
Door
Drain filter
Adjustable feet
DRAIN
1200
900
700
500
RINSE
HOLD
START
PAUSE
RINSE
DRY
DRYING
TIME
PREWASH
WASH
RESET
SPIN
WOOLLENS
DELICATES
EASY-
CARES
DRYING
COTTON
END
EXTRA
RINSE
WASH
TIME
DELAY
START
RINSE HOLD
ON / OFF
STAIN
QUICK
SPIN
DRAIN
SOFTENERS
RINSES
SOAK
30
40
COLD
40
30
60
50
40
40
EASY TO IRON
DRYING
95
E
60
50
40
30
MINIPROGRAMME
SPIN
SPEED
PREWASH
Front view
11
ABFHJGCDE
DRAIN
1200
900
700
500
RINSE
HOLD
START
PAUSE
RINSE
DRY
DRYING
TIME
PREWASH
WASH
RESET
SPIN
WOOLLENS
DELICATES
EASY-
CARES
DRYING
COTTON
END
EXTRA
RINSE
WASH
TIME
DELAY
START
RINSE HOLD
ON / OFF
STAIN
QUICK
SPIN
DRAIN
SOFTENERS
RINSES
SOAK
30
40
COLD
40
30
60
50
40
40
EASY TO IRON
DRYING
95
E
60
50
40
30
MINIPROGRAMME
SPIN
SPEED
PREWASH
Description of the appliance
RESET
WOOLLENS
DELICATES
EASY-
CARES
DRYING
COTTON
SPIN
DRAIN
SOFTENERS
RINSES
SOAK
30
40
COLD
40
30
60
50
40
40
EASY TO IRON
DRYING
95
E
60
50
40
30
MINIPROGRAMME
Control panel
A = Mains-on light
B = ON/OFF button
C = Option buttons
D = Drying time button
E = Delay start button
F = Display
G = START/PAUSE button
H = Programme progress display
J = Programme selector dial
Programme selector dial
The programme selector determines the
type of washing cycle (e.g. water level,
drum movement, number of rinses, spin
speed), the washing temperature and
enables the required drying programme
to be selected according to the type of
laundry.
The selector is divided into 5 sections:
• Cotton
12
• Easy-cares
• Delicates
• Woollens (hand washing)
• Special programmes
The selector dial can be turned either clockwise or anticlockwise.
Description of the appliance
Position E corresponds to the ENERGY SAVING programme at approx.
67°C for normally soiled laundry, extended washing time (cannot be
combined with STAIN and QUICK).
Position 40°C Easy to iron.
In this position the laundry is gently washed and spun to avoid any
creasing. In this way ironing is easier.
Position COLD = cold wash
ON/OFF button
Press this button to switch the machine on. Press it again to switch the
machine off.
Mains-on light
This light comes on when the ON/OFF button is pressed, and goes out
when it is pressed again.
START/PAUSE button
This button has three functions:
a) Start
After having selected the required programme, press this button to start
the machine; the corresponding pilot light stops flashing.
b) Pause
To interrupt a programme which is running, press the START/PAUSE
button: the corresponding pilot light will start to flash.
To restart the programme from the point at which it was interrupted,
press the START/PAUSE button again.
c) Empty out water
At the end of a programme which ends with water in the drum (RINSE
HOLD option), or after the “soak” programme, press the START/PAUSE
button to empty out the water: after the soak programme, the machine
will empty only; after RINSE HOLD programmes, the machine will empty
and spin.
DELAY START button
The wash programme can be delayed from 1 hour up to a maximum of
24 hours.
The button must be pressed after selecting the programme and
before pressing the START/PAUSE button.
The figures indicating the delay appear for about 3 seconds in the display. The duration of the selected wash programme is then displayed.
13
Description of the appliance
One minute after depressing the START/PAUSE button, the machine
starts its hourly countdown.
To alter or cancel the preset delay, press the START/PAUSE button, then
press the DELAY START button until the required time is displayed or, if
you wish to cancel the delay, until the symbol 0 h is displayed.
Then press the START/PAUSE button again.
When the delay is cancelled, the display shows the duration of the wash
programme previously selected.
DRYING TIME button
By depressing this button you can select the desired drying time
according to the fabrics (cotton or easy-cares) you have to dry.
To select the drying time you have to push the button until the drying
time you want appears in the display.
For COTTON you can select a drying time from 10 minutes to 2 hours
and 10 minutes (2.10).
For EASY-CARES you can select a time from 10 minutes to 1 hour and
40 minutes (1.40).
In automatic washing and drying programme the drying time is displayed for 3 seconds, then the duration of the programme will appear.
14
Programme Option buttons
Depending on the programme, different functions can be combined.
These must be selected after choosing the desired programme and
before depressing the START/PAUSE button.
When these buttons are pressed, the corresponding pilot lights come on.
When they are pressed again, the pilot lights go out.
If an incorrect option is selected, the pilot lights flash for about 3 seconds
and the message Err is displayed.
SPIN SPEED
Press this button to reduce the maximum speed of the final speed proposed
by the machine for the selected programme.
The maximum spin speed for cotton is 1200 rpm, for easy-cares and
wool 900 rpm and for delicates 700 rpm.
RINSE HOLD
When this option is selected, the last rinse water is not emptied out, to
prevent the fabrics from creasing. When the programme has finished,
the corresponding pilot light on the programme progress display is on
Description of the appliance
and the light of the START/PAUSE button flashes to indicate that the
water must be emptied out.
To empty out water:
• select SPIN SPEED and press START/PAUSE-button;
• press the START/PAUSE button: after emptying, the machine performs
the spin cycle required for the type of wash selected;
• select the DRAIN programme to empty out the water without spinning.
Warning! The programme selector dial must be turned first to RESET
and then to programme “DRAIN”.
If the water is not emptied out, the machine automatically empties
itself after 18 hours.
The RINSE HOLD option cannot be selected for the automatic WASHING &
DRYING programme.
PREWASH
The machine performs a prewash cycle at 30°C max. The prewash cycle
ends with a short spin in programmes for Cotton and Easy-cares, and
with emptying of the water only for Delicates.
This option is not available with the wool programme and cannot be
used with STAIN.
For use when washing heavily soiled laundry.
STAIN
To treat heavily soiled washing or stained washing with stain remover
(extended main wash with time optimised stain action phase, not selectable for wool or programmes with temperatures lower than 40°C).
This function cannot be used with QUICK and PREWASH.
QUICK
By pressing this button the washing time is reduced. For use when
washing lightly soiled laundry.
This option is not available with the wool and Economy programme and
cannot be used with STAIN.
EXTRA RINSE
Can be used with all programmes except the wool programme. The
machine performs 4 rinses instead of 3.
This option is recommended for people who are allergic to detergents
and in areas where the water is very soft.
15
Description of the appliance
DRAIN
RINSE
DRY
PREWASH
WASH
SPIN
END
RINSE HOLD
Display
The display shows the following information:
• if the programme selector dial is on the RESET position, three flashingdashes appear immediately after pressing the ON/OFF button to indicate
that the machine is ready to receive instructions for the required wash
programme;
• duration of the selected wash programme, calculated automatically
on the basis of the maximum recommended load for each type of fabric.
• Selected drying time (max. 2 hours and 10 minutes for cotton, 1 hour
and 40 minutes for easy-cares).
• When the programme has finished, a flashing zero is displayed;
• delayed start, programmed using the special button (E).
• Incorrect option selection. If an option which is not compatible with
the set wash programme is selected, the message Err is displayed.
• Alarm code indicating a fault in the machine operation (see pages
38...41).
Programme progress display
By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on.
After the machine has started, only the running phase
pilot light stays on. When the programme has finished,
the END pilot light comes on.
16
Description of the appliance
Cancelling/Altering a programme
To cancel or alter a programme which is running, turn the programme
selector dial to the RESET position: three flashing dashes will be displayed, the programme is cancelled. The machine will maintain the
water in the tub. To drain water, select DRAIN programme. If you wish
to select another programme maintaining the water in the tub, after
cancelling the previously selected programme select a new one and
then start it by pressing START/PAUSE button.
Opening the door after the programme has started
You can open the door, after having set the machine to PAUSE, provided the following conditions exist:
• the machine is not in the heating or drying phase beyond 40°C;
• the level of the water is not high;
• the drum is not turning.
If these requirements are met, when you pause the machine the door
can be opened.
Should it not be possible to open the door, and should it be absolutely
necessary to do so, switch the machine off by pressing the ON/OFF button.
After approximately 3 minutes, you can open the door.
Pay attention to the level and temperature of the water in the
machine!
When you close the door and press the ON/OFF button again, the washing machine will resume the programme from the point where it had
been interrupted.
17
Programme chart
Description of the appliance
Detergent dispenser drawer
Compartment for prewash or soak detergent and stain remover. The prewash
or soak detergent is added at the beginning of the wash programme. The
stain remover is added during the STAIN-Action phase in the main wash.
Compartment for powder or liquid detergent used for main wash.
It is emptied at the beginning of the wash cycle.
Compartment for liquid additives (fabric softener, starch).
It is emptied at the last rinse.
The quantity of additives must not exceed the “MAX” mark in the
drawer.
Before the first wash
Before your first wash, we recommend that you run a cotton cycle at
60°C, without any laundry in the machine, to remove any manufac-
turing residue from the drum and tub.
Pour 1/2 a measure of detergent into the dispenser drawer and start the
machine.
18
Loading...
+ 41 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.