ELECTROLUX 111K User Manual

111K

Electric hob

Table de cuisson électrique

Operating Instructions

Notice d’utilisation

GB

FR

2

Important Safety Information

You MUST read these warnings carefully before installing or using the hob. If you need
assistance, contact our Customer Care Department on 08705 350350

Installation

z This hob must be installed by qualified personnel, according to the manufacturer’s

instructions and to the relevant British Standards.

z Remove all packaging before using the hob.

z Ensure that the electrical supply complies with the type stated on the rating plate.

z Do not attempt to modify the hob in any way.

Child Safety

z This hob is designed to be operated by adults. Do not allow children to play near or with

the hob.

z The hob gets hot when it is in use. Children should be kept away until it has cooled.

z Children can also injure themselves by pulling pans or pots off the hob.

During Use

z This hob is intended for domestic cooking only. It is not designed for commercial or

industrial purposes.

z Do not use this hob if it is in contact with water. Do not operate the hob with wet hands.

z Ensure the control knobs are in the ‘OFF’ position when not in use.

z When using other electrical appliances, ensure the cable does not come into contact

with the hot surfaces of the cooking appliance.

z Unstable or misshapen pans should not be used on the hob as unstable pans can

cause an accident by tipping or spillage.

z Never leave the hob unattended when cooking with oil and fats.

z Never use plastic or aluminium foil dishes on the hob.

z Perishable food, plastic items and areosols may be affected by heat and should not be

stored above or below the hob unit.

ENGLISH

3

Service

z This hob should only be repaired or serviced by an authorised Service Engineer and

only genuine approved spare parts should be used.

UU

UU

UEnvironmental Information

z After installation, please dispose of the packaging with due regard to safety and the

environment.

z When disposing of an old appliance, make it unusable, by cutting off the cable.

• The symbol on the product or on its packaging indicates that this product may not

be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling
of this product, please contact your local city office, your household waste disposal
service or the shop where you purchased the product.

Keep this instruction book for future reference and ensure it is passed on to any
new owner.

This appliance is manufactured according to the following EEC directives:
73/23 EEC - 90/683 EEC - 93/68 EEC ­89/336 EEC - 90/396 EEC,
current edition.

Guide to Use the instructions

The following symbols will be found in the text to guide you throughout the Instructions:

Safety Instructions

Step by step instructions for an operation

Hints and Tips

Environmental information

)

UU

UU

U

4

For the user

Important Safety Information 2

Description of the Hob 5

Operation 6

Hints and Tips 7

Maintenance and Cleaning 8

Something Not Working? 9

Service and Spare Parts 10

Customer Care 10

Guarantee Conditions 11

For the installer

Instructions for the Installer 12

Important safety requirements 12

Installation 13

Cut Out Size 13

Electrical connections 15

Wiring diagram 16

Contents

5

Description of the Hob

Back Left

Hotplate

Front Left

Hotplate

Back Right Hotplate

Control Knob

Front Right Hotplate

Control Knob

Front Right

Hotplate

Back Right

Hotplate

Back Left Hotplate

Control Knob

Front Left Hotplate

Control Knob

Operating Pilot Lamp

INSTALLATION

The hob must be installed according to the instructions supplied.

The hob must be installed by qualified personnel to the relevant British Standards.

Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the
event of a breakdown.

WHEN THE HOB IS FIRST INSTALLED

Once the hob has been installed, it is important to remove any protective materials, which
were put on in the factory.