Electrohome 801EDVD Manual

Name: Electrohome 801EDVD
Brand: Electrohome
SKU: 14894980
Rating: 4 (1 reviews)

4 (1)

DVD PLAYER

801EDVD

OPERATING MANUAL

Important Safety Instructions

1. Read Instructions

All the safety and operating instructions should be read before the product is operated.

2. Retain Instructions

The safety and operating instructions should be retained for future reference.

3. Heed Warnings

All warnings on the product and in the operating instructions should be adhered to.

4. Follow Instructions

All operating instructions should be followed.

5. Cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6. Attachments

Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7. Accessories

Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.

8. Portable Cart Warning

A product and cart combination should be moved with care. Quick stop, excessive force, and uneven surface may cause the product and cart combination to overturn.

(Symbol provided by RETAC)

Introduction

9. Water and Moisture

Do not use this product near water for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

10. Ventilation

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

11. Power Sources

This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power or other sources, refer to the operating instructions.

12. Grounding or Polarization

This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

13. Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

14. Protective Attachment Plug

The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug.

Important Safety Instructions

Introduction

15. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antennadischarge unit, connection to grounding electrodes, and requirements for the grounding electrode. See figure below.

16. Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power lines surges.

17. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

18. Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacles, as this can result in a risk of fire or electric shock.

19. Object and Liquid Entry

Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

20. Servicing

Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

21. Damage Requiring Service

Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A)When the power-supply cord or plug is damaged, B)If liquid has been spilled, or objects have fallen into the product,

C)If the product has been exposed to rain or water, D)If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician

to restore the product to its normal operation, E)If the product has been dropped or damaged in any way, and

F)When the product exhibits a distinct change in performance this indicates a need for service.

22. Replacement Parts

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

23. Safety Check

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

24. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

25. Heat

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Content

Introduction

Important Safety Instructions	1
Front Panel and Rear Panel illustration	3
Remote Control	4

Connections

Connecting to a TV set	5
Connecting to an AV Receiver with 2 Channel Analog Audio Input	6
Connecting to an AV Receiver with Digital Audio Input	7

Basic Playback

Basic Operation

Advanced Features

Modes and Features Setup	9
System Setup	9
Audio Setup	11
Video Setup	11
Speaker Setup	12
Digital Setup	13
Remote Control Operation	14
MP3/MPEG4 Playback	16
KODAK Picture CD playback	16

Others

Troubleshooting	17
Care of discs	17
Specifications	18

SN8281-5.1

Front Panel and Rear Panel Illustration	Introduction
Front panel




									10	12		14
1	2	3	4	5	6	7	8	9	10	12		14
1	2	3	4	5	6	7	8	9	11		13

1.	Power button	6.	Remote sensor	11. R/L button
2.	Microphone 1/2	7.	Open/Close button	12.	Pause button
3.	Microphone vol 1/2	8.	Previous button	13.	N/P button
4.	Disc tray	9.	Next button	14.	Play button
5.	LED display	10. Stop button

Rear panel

1	2	3		4		5
R	MR	ML	G(y)<y>	B(pb)<cb>	R(pr)<cr>	Video
L	SR	SL	CEN	SUB	Coaxial	S-Video	Optical
2 CH		5.1 CH Audio out			Digital Audio out
	6	7	8	9	10	11	12

1. 2 channels Audio output jacks		7.	SL. Surround left channel
2. MR. Middle right channel		8.	CEN. Center channel
3.	ML. Middle left channel	9.	SUB. Subwoofer channel
4. Component (Y, Pb/Cb, Pr/Cr) output		10.Coaxial digital signal output
5.	Video Output	11. S-video output
6.	SR. Surround right channel	12. Optical digital signal output