The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence dangerous voltage within the
inside of the product that may be sufficient level to constitute a risk of electric
shock.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and servicing instructions.
Safety instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this LCD TV near water.
English
6) Clean only with dry cloth. Do not use liquid, alcohol, or aerosol cleaners.
7) Do not block any ventilation openings. Install your LCD TV in a well ventilated
area.
8) Keep your LCD TV away from moisture, excessive dust and any heat sources,
such as radiators, heat registers, stoves, or any other apparatus (including
amplifiers) that produce heat.
9) Do not remove the back cover. There are no user-serviceable parts inside.
10) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
11) Protect the power cord from being walked on or pinched particularly at plugs,
receptacles, and the point where they exit from the LCD TV.
12) Never rest objects on the power cord or place it in high traffic areas.
13) Only use attachments/accessories specified by the
manufacturer.
14) Use only with stand, tripod, bracket, or table specified by
the manufacturer, or sold with the LCD TV. When a cart is
used, use caution to avoid injury from tip-over.
15) Unplug this LCD TV during lightening storms or when
unused for long periods of time.
16) Refer all servicing to qualified service personnel-Servicing may be required if the LCD TV has been damaged in any way, such as
power-supply cord or plug damage, liquid has been spilled or objects have fallen
into the LCD TV, the LCD TV has been exposed to rain or moisture, does not
operate normally, or has been dropped.
English
17) Do not expose your LCD TV to dripping or splashing, and do not place objects
filled with liquids on it.
18) The Shock Hazard Marking and Associated Graphical Symbol are provided on the
back panel of unit.
19) This product is only to perform the useful function of entertainment and visual
display tasks are excluded.
20) Wall or ceiling mounting: When mounting the product on a wall or ceiling, be sure
to install the product according to the method recommended by the manufacturer.
Use only the mounting hardware recommended by the manufacturer. This is a
safety feature.
CAUTION: Any damage caused by incorrectly attempting to mount this
LCD TV is not covered under the terms of the manufacturers warranty.
WARNING: To reduce the risk of fire or electric shock, do not expose this
LCD TV to rain or moisture.
Thank you for purchasing this LCD-TV.
This LCD-TV package comes with:
LCD TV
User’s Guide book
Remote control
Battery AAA x 2
Power Cord
VGA Cable
RCA A/V Cable
1
FRONT PANEL BUTTONS
English
Volume Down
Volume Up
On Screen Display Menu On/Off
CH Down
CH Up
Enter
Power ON/OFF button
Power LED Indicator
❾ Remote Control Receiver
Note:
1. Press
and press
2. Press
and press
VOL+
VOL+
VOL-
VOL-
and
and
MENU
and
VOL+
and
buttons at the same time to lock power button,
MENU
VOL+
buttons again to unlock it.
buttons at the same time to lock OSD menu,
buttons again to unlock it.
2
English
BACK PANEL BUTTONS
A
B
C
D
E
F
L K J I
A Analog TV input
B S-Video input
C A/V and S-Video signal Audio input (left/right)
D YPbPr signal Audio input (left/right)
E YPbPr signal input
F Composite Video input
G Audio output
H PC Audio input
I VGA signal input
J HDMI Input Terminal
K Headphone Jack
L Power (AC input)
H G
3
REMOTE CONTROL
English
4
Remote control button function as follows:
1 POWER Power ON/OFF
2 MTS Select Mono, Stereo or SAP in TV
3 INFO Display current information
4 SLEEP Set TV Sleep timer
5 SOUND Select sound modes
English
6 0~9, 100/- number
button
7 VOL+ and VOL- Adjust volume UP/DOWN
8 FAV.A/D To skip or restore Favorite Channels
9 UP/ DOWN/ LEFT/
RIGHT/ ENTER
10 INPUT Input source select
11 ZOOM Adjust window size
12 FREEZE “Freeze-Frame” the current screen
13 P. POS Adjust sub-screen window position
14 C.C Displaying captions during closed caption source and closed
15 P. S I Z E Adjust sub-screen window size
16 MUTE
17 TV
18 PICTURE
19 RETURN Return to previous channel
20 CH▲ and CH▼ Adjust Channel UP/DOWN
Direct channel select
UP/ DOWN/ LEFT/ RIGHT: Navigate and adjust OSD function
ENTER: Enter the function setting
caption mode select
Volume mute ON/OFF
Swap to TV when in other source
Select picture modes
21 FAV. CH Select from preset Favorite Channels
22 MENU On Screen Display (OSD) menu ON/OFF
23 WIDE Change the image size
24 PIP/POP Toggle to enable/disable Picture in Picture/Picture by Picture
function
25 P.INPUT POP/PIP input source select
26 LOCK Set program lock
27 SWAP Switch between main screen and sub-screen
5
INSTALLATION
Connecting RF antenna, Cable TV Wire
Make sure the power is OFF before installing your LCD TV.
Connect the LCD TV to TV antenna or set-top-box with 75-ohm coaxial cable. Preset the TV
channels into memory with AUTO SCAN function when using an antenna or cable TV system
without a cable connecter box (See page 13).
RF Cable or Adapter
(not supplied)
Connecting to DVD / Set Top Box
Connect Video/Audio cables from compatible devices into the back panel of LCD TV.
1) With AV cable:
RCA A/V Cable
VCR or DVD Playe
2) With S-Video cable:
r
English
S-Video Cable (not supplied)
Audio in Cable
(not supplied)
VCR or DVD Player
6
English
3) With Component Video cable:
YPbPr Cable (not supplied)
Audio in Cable
(not supplied)
VCR or DVD Player
4) With HDMI cable:
(DVD Player should have
VCR or DVD Player
HDMI Cable (not supplied)
the HDMI output terminal)
Connecting to External Stereo System to Listen to LCD TV Sound
Connect the audio output terminal of the LCD TV to audio in terminal of the stereo system
(stereo system sold separately).
Audio in Cable
(not supplied)
Stereo system
7
Connecting to the Headphone
Connect the headphone to the headphone output terminal of the LCD TV.
(Headphone sold separately).
Headphone
(not supplied)
Connecting to a Computer
Connect the VGA cable from VGA output of Computer to the VGA terminal input of your
LCD TV.
PC
English
VGA 15 Pin Cable
PC Audio In
Connect the Audio cable (green) from audio output of your Computer to the audio input
terminal (green) of your LCD TV.
PC Audio Connection (not supplied)
PC
8
Connecting with the power cord
Connect the power cord to the AC inlet on the back of your LCD TV, after all connections
have been completed, and plug the other end of the power cord into a correctly grounded
electrical outlet.
AC wall Switch
English
9
BASIC OPERATION
To operate your LCD TV, you may use the TV remote control or top panel buttons to
select input source, change channels, or adjust volume.
Turning on the LCD TV
Before using the LCD TV:
1. Connect external equipment properly.
2. Insert the power plug and the power LED indicator will light red.
Power On/Off
To turn the LCD TV on/off :
Press POWER button under the LCD TV, or press the POWER button on your remote
control to turn on/off the TV. The power LED indicator lights green when the LCD TV is on.
Select input source
To select the required input source:
Press the INPUT button on the remote control, Use ◄► to select the required input source
between TV, HDMI, YPbPr, AV, S-Video, and VGA.
To confirm the selection, press ENTER.
English
Volume Adjusting
Press VOL +/- to adjust volume.
To silence volume, press MUTE.
If you want to restore volume, press MUTE again, or press VOL +/- directly.
INFO
To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on the screen. (It shows all or some of
the information about Input, Channel, Resolution, Audio Type, Smart Sound Modes, and
Smart Picture Modes, depending on what input source it is in.)
TV
10
English
Picture
Press the PICTURE button on the remote control to switch between the Smart Picture
modes of User, Cinema, Sport, Vivid, and Hi-Bright.
Sound
Press the SOUND button on the remote control to switch between the Smart Sound
modes of User, Rock, POP, Live, Dance, Techno, Classic, and Soft.
Channel Select
Press number key or CH ▲/▼ button to select your desired channel.
The 100/- button functions as “100”. If your desired channel is below 100, directly press
number buttons. If your desired channel is over 100, press 100/- button first, and then
press the other two number buttons.
Ex: Your desired number is 8.
Press 0 → press 8, or press 8 only.
Ex: Your desired number is 110.
Press 100/-→ press 1→ press 0.
※ Return to the previous channel, press RETURN button.
Sleep Time Setting
Repeatedly press SLEEP button to set the off timer. The function is used to automatically
shut off the LCD TV after a preset period of time passed. There are several times for
choice – OFF, 30min, 60min, 90min, or 120min.
Zoom
Press ZOOM button repeatedly to select the screen size. You can select from 1/8, 1/4, 1/2,
1, x2, x4, and x8.
Favorite Channel
You can press FAV.CH button to watch your favorite channels. Use FAV.A/D button to add
the current channel to your favorite channels, or to delete it from your favorite channels.
You can add up to 10 favorite channels.
Freeze Picture
Press FREEZE button to freeze picture. However, the sound still continues.
Using the OSD function
You can use the OSD menus and options to adjust various settings by using the remote
control.
The basic operation is as following:
Press MENU to display OSD menu.
Press ◄► to select your desired top Menu.
Use ▲▼ to select the control you want to adjust.
When selecting the control with Press <Enter>, press ENTER to enable the function.
Press ◄► to adjust or select the settings.
Press MENU to exit from the OSD menu.
11
ADVANCED OPERATION—OSD MENU
Video Menu
— Adjusting the picture quality
Video Menu is active in all but the VGA input source.
• Contrast: To adjust contrast of video. (right: Max, left: Min.)
• Brightness: To adjust luminance of video. (right: Max, left: Min.)
• Color: To adjust colour. (right: brilliant colour, left: pale colour.)