Electro Harmonix Triple Foot Controller User manual

TRIPLE FOOT CONTROLLER

Congratulations on your purchase of the Electro-Harmonix Triple Foot
Controller! The Triple Foot Controller is a compact, easy-to-use utility
pedal providing remote foot-control for devices with external footswitch
jacks. It works great with the Electro-Harmonix Grand Canyon® Delay &
Looper, 720 Stereo Looper™, Superego+™ Synth Engine, Mod Rex™
Polyrhythmic Modulator, Super Pulsar™ Tremolo, and many other pedals
and devices made by both Electro-Harmonix and other manufacturers.
The Triple Foot Controller can also be used as an external tap-tempo
footswitch for a large variety of pedals.

- USING THE TRIPLE FOOT CONTROLLER -

Use the supplied Tip-Ring-Sleeve (TRS) cable* to connect the Triple Foot
Controller (TFC) to the device you want to control. Attach the cable to the
phonejack on the TFC and to the proper jack on the device it controls. We
recommend the device be powered down while making the connection.

The Triple Foot Controller has three footswitches. The switch polarity for
all three footswitches is normally open (NO). They work as follows:

T – When this switch is pressed down, the Tip and Sleeve are electrically
shorted together. If you connect a standard Tip-Sleeve (TS) instrument
cable to the TFC, only the T footswitch provides control to the other
device.

R – When this switch is pressed down, the Ring and Sleeve on the TRS
cable are electrically shorted together.

T+R – When this switch is pressed down, both the Tip and Ring are
electrically connected to the Sleeve of the TRS cable. The T+R footswitch
simultaneously activates both the Tip and Ring on the TRS cable. When
using a TS cable, the T+R footswitch might also activate the T conductor.

Please note: the exact function of each TFC footswitch depends on the
device to which it is connected. Please refer to the device’s user manual
for more information on the functions assigned to each TFC footswitch.

*

Use a standard Tip-Sleeve instrument cable for single footswitch control on the T
footswitch. In this scenario, the Triple Foot Controller works great as a TAP footswitch for
the Electro-Harmonix Canyon, DMMTT, or other devices.

- WARRANTY INFORMATION -

Please register online at http://www.ehx.com/product-registration or

complete and return the enclosed warranty card within 10 days of

purchase. Electro-Harmonix will repair or replace, at its discretion, a

product that fails to operate due to defects in materials or workmanship

for a period of one year from date of purchase. This applies only to

original purchasers who have bought their product from an authorized

Electro-Harmonix retailer. Repaired or replaced units will then be

warranted for the unexpired portion of the original warranty term.

If you should need to return your unit for service within the warranty

period, please contact the appropriate office listed below. Customers

outside the regions listed below, please contact EHX Customer Service

for information on warranty repairs at [e-mail] or +1-718-937-

8300. USA and Canadian customers: please obtain a Return

Authorization Number (RA#) from EHX Customer Service before

returning your product. Include  with your returned unit  a written

description of the problem as well as your name, address, telephone

number, e-mail address, RA# and a copy of your receipt clearly showing

the purchase date.

United States & Canada Europe

EHX CUSTOMER SERVICE JOHN WILLIAMS
ELECTRO-HARMONIX ELECTRO-HARMONIX UK
c/o NEW SENSOR CORP. 13 CWMDONKIN TERRACE
55-01 2ND STREET SWANSEA SA2 0RQ
LONG ISLAND CITY, NY 11101 UNITED KINGDOM

Tel: [phone] Tel: [phone]
Email: [e-mail] Email: [e-mail]

To hear demos of all EHX pedals visit us on the web at www.ehx.com

Email us at [e-mail]