Electro Harmonix RTG User manual

RTG

Random Tone Generator

Congratulations on purchasing the RTG (Random Tone Generator) synthesizer! Our
new RTG is a faithful recreation of the EH1300 RTG, originally released in 1980,
with some modern enhancements: status LED, footswitch to engage/disengage the
output and comes in our nano sized enclosure. The randomly-produced tones range
between 20Hz and 1kHz.

CONTROLS & FEATURES

RATE KNOB – Changes how often the tones are produced. As you turn the RATE

knob clockwise, the generated tone is updated more often. The range of the RATE is
5 seconds to 0.1 seconds.

GLIDE SWITCH – Enables a portamento-like (pitch glide) effect.
OUTPUT JACK – Plug this into your amp or the input of other effects. It is

compatible with instrument or line-level inputs.
FOOTSWITCH – Engages/Disengages the output. When the LED is off, the output

is muted.
POWER JACK – Compatible with BOSS-style 9.6VDC / 200mA power adapters

with center negative plugs. The RTG can also be powered by a 9V battery. To
prolong battery life, be sure to unplug the output jack when the RTG is not in use.
Maximum current draw: 7mA.

Please register online at http://www.ehx.com/product-registration or complete and return the enclosed
warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product
that fails to operate due to defects in materials or workmanship for a period of one year from date of
purchase. This applies only to original purchasers who have bought their product from an authorized Electro­Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original
warranty term.

If you should need to return your unit for service within the warranty period, please contact the appropriate
office listed below. Customers outside the regions listed below, please contact EHX Customer Service for
information on warranty repairs at [e-mail] or [phone]. USA and Canadian customers: please
obtain a Return Authorization Number (RA#) from EHX Customer Service before returning your product.
Include with your returned unit: a written description of the problem as well as your name, address,
telephone number, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date.

United States & Canada

EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
55-01 2ND STREET
LONG ISLAND CITY, NY 11101
Tel: [phone]
Email: [e-mail]

Europe

JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: [phone]
Email: [e-mail]

This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending
upon the laws of the jurisdiction within which the product was purchased.

To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at [e-mail]

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee t hat interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

•

Modifications not expressly approved by the manufacturer could void the user's authority to operate the
equipment under FCC rules.

Consult the dealer or an experienced radio/TV technician for help.

- WARRANTY INFORMATION -

FCC COMPLIANCE