LPB-1 Linear Power Booster
Congratulations! You have just purchased the LPB-1 Power Booster, a reissue of
the product that first ushered in the age of overdrive in 1968. With the LPB-1
you’ll be able to increase guitar sustain, and increase the performance of all other
effects, especially distortion devices.
BOOST CONTROL
FOOTSWITCH
engaged. When off, it is in True Bypass mode.
Power, from the internal 9-volt battery or external battery eliminator, is activated by
plugging into the input. The input cable should be removed when the unit is not in use to
avoid running down the battery. The input impedance presented at the Input Jack is 43
kohms. The output impedance at the Output Jack is 10 kohms.
The barrel connector on the front of LPB-1 is for a 9-volt battery eliminator capable of
delivering 100 mA of current. The inner ring of the 9-volt battery eliminator must be
negative, the outer ring positive. The unit’s battery may be left in or taken out when the
eliminator is in use.
To change the 9-volt battery, you must remove the 4 screws on the bottom of the LPB-1.
Once the screws are removed, you can take off the bottom plate and change the battery.
Please do not touch the circuit board while the bottom plate is off or you may damage a
component.
The optional 9V power supply from Electro-Harmonix is
Boss ™ & Ibanez™)
is for the 9-volt battery eliminator capable of delivering 100 mA of current. The inner ring of
the 9-volt battery eliminator must be negative, the outer ring positive. The unit’s battery may
be left in or taken out when the eliminator is in use.
— Adjusts the amount of boost.
— Engages and disengages the effect. When the LED is on the pedal is
-OPERATION AND WARNINGS-
9.6 volts/DC 200ma.
-CONTROLS-
US96DC-200BI
The barrel connector on the front of the LPB-1
(same as used by
Please complete and return the enclosed warranty card within 10 days of purchase. We will
repair the unit for free within one year of date of purchase. If you should need to return
your unit for service within the warranty period, please include a brief description of the
problem as well as your
check or money order for $5.00 shipping and handling to:
Electro-Harmonix
C/O New Sensor Corporation
32-33 47
Long Island City, NY 11101
Att: Service Department
Please make checks/money orders payable to New Sensor Corporation.
To hear demos by rock stars on all EH pedals visit us on the web at www.ehx.com.
Email us at info@ehx.com
th
Ave
- WARRANTY INFORMATION -
name, address, telephone number, copy of your receipt, and a
Loading...