Elation Professional X-Fogger User Manual
High Efficiency Vaporizing System and Highly Durable Heaters Ensure 25% Increased Output.
Modular Design for Easy, Cost Effective Maintenance.
Standardized Interface Allows Interchangeable Control Modules on All Models.
Illuminated Fluid Tank for Easy Monitoring for the Level of Fog Fluid.
Electronic Low Fluid Monitoring Protects Pump from Running Dry
Heavy-Duty, Quiet Pump for Continuous, Silent Operation.
Table of Contents
Introduction
Important Safeguards
Unpacking & Inspection
Setup
Operation
Control Module Operation
ANTARI X-20 DMX Module Settings
Maintenance
Performance Notes
1
2
4
4
5
6
8
10
11
Congratulations on the purchase of your new
ANTARI X Fogger
Introduction
Thank you for choosing an ANTARI X Fogger. You now own a
rugged and powerful state-of-the-art machine. Prior to use, we
suggest that you carefully read all of the instructions. By
following the suggestions found in this user manual, you can look
forward to the reliable and satisfactory performance of your
ANTARI Fog Machine for years to come.
Please follow these operation, safety and maintenance instructions
to ensure a long and safe life for your fog machine.
Cautions
Risk of electric shock. Disconnect the appliance from the electric
supply before removing the cover. Note: there are no user
serviceable parts inside.
1
Important Safeguards
Danger of Electric Shock
! Keep this device dry.
! For inside use only. Not designed for outside use.
! For the 110V models, use 3-prong grounded electrical
outlet only. Prior to use take care to determine that the
unit is installed at the rated voltage.
! Always unplug your ANTARI Fog Machine before filling
its tank.
! Keep fog machine upright.
! Unplug the machine when not in use.
! This machine is not water- or splash-proof. If
moisture, water, or fog liquid gets inside the housing,
immediately unplug the unit and contact a service
technician or your ANTARI dealer before using it again.
! No user serviceable parts inside. Refer to your ANTARI
dealer or other qualified service personnel.
Danger of Burns
! For adult use only. Fog machine must be installed out
of the reach of children. Never leave the unit running
unattended.
! Never aim the output nozzle directly at people.
! Fog machine output aren is very hot. Avoid coming
within 60 cm of the output nozzle during operation.
! Locate the fog machine in a well-ventilated area. Never
cover the unit's vents. In order to guarantee adequate
ventilation, allow a free air space of at least 20 cm
around the sides and top of the unit.
2
! Never aim the output nozzle at open flames.
! If the supply cord is damaged, it must be replaced by
manufacturer or its service agent or similarly qualified
personnel in order to avoid a hazard.
! The output nozzle becomes very hot during operation
0
(300 C). Keep flammable materials at least 50 cm away
from the nozzle.
! Always allow your ANTARI X Fogger to cool down
before attempting to clean or service it.
Danger of Explosion
! Never add flammable liquids of any kind (oil, gas,
perfume) to the fog liquid.
! Use only the high-quality, water-based ANTARI fog .
Other fog liquids may cause clogging or "spitting".
! Always make sure there is sufficient liquid in the fog
liquid tank. Operating this unit without liquid will
cause damage to the pump as well as over-heating of
the heater.
! If your ANTARI Fog Machine fails to work properly,
discontinue use immediately. Drain all fog liquid from
the tank, pack the unit securely (preferably in the
original packing material), and return it to your
ANTARI dealer for service.
! Always drain tank before mailing or transporting this
unit.
! Never drink fog liquid. If it is ingested, call a doctor
immediately. If fog liquid comes in contact with skin
or eyes, rinse thoroughly with water.
Important:
Pay attention to all warning labels and instructions printed on the
exterior of your ANTARI Fog Machine.
3
Loading...