Pro Haze DMX™ Introduction
Introduction:
The Pro Haze DMX is a professional hazer. It is capable of producing
very large quantities of haze quickly, quietly and instantly with no warmup time. In addition, with DMX on board, operators are able to control
the unit completely and conveniently. The Pro Haze DMX will provide
very large amounts of fine, translucent haze in any environment.
Customer Support:
Elation provides a customer support line, to provide help and to answer
any question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.elationlighting.
com for any comments or suggestions.
Service Hours are Monday through Friday 9:00 a.m. to 6:00 p.m. Pacific
Standard Time.
Voice: (323) 582-3322
Fax: (323) 582-3108
E-mail: support@elationlighting.com
Warning! To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture
.
Rev. 6/04
USER INSTRUCTIONS
Elation Professional
4295 Charter Street
Los Angeles Ca. 90058
www.elationlighting.com
Caution! There are no user serviceable parts inside this unit. Do
not attempt any repairs yourself, doing so will void your manufactures
warranty.
Please protect our environment, do not discard this carton in the trash.
Please recycle when ever possible.
IF THE POWER SUPPLY CORD IS DAMAGED, IT MUST BE
REPLACED BY MANUFACTURER OR ITS SERVICE AGENT
OR SIMILARLY QUALIFIED PERSON IN ORDER TO AVOID A
HAZARD.
©Elation Professional® - www.elationlighting.com - Pro Haze DMX™ Instruction Manual Page 2
Pro Haze DMX™ Table of Contents
Pro Haze DMX™ Safety Warnings
Introduction................................................................................2
Customer Support.......................................................................2
Warnings...................................................................................4
Features..................................................................................5
Set Up..........................................................................................6
Operating Instructions................................................................10
Trouble Shooting........................................................................12
Remote Control..........................................................................12
Warranty...........................................................................14
Specifications...........................................................................15
Pro Haze DMX™ Safety Warnings
Important Safety Issues:
• NEVER POINT OR AIM THIS DEVICE TOWARDS PEOPLE OR THEIR
CLOTHING.
• USE ONLY THE HIGH-QUALITY HAZER LIQUID THAT YOUR DEALER
RECOMMENDS.
• ALWAYS MAKE SURE THERE IS SUFFICIENT LIQUID IN THE HAZER
LIQUID TANK. OPERATING THIS UNIT WITHOUT LIQUID MAY CAUSE
PERMANENT DAMAGE TO THE MACHINE.
• IF YOUR HAZER FAILS TO WORK PROPERLY, DISCONTINUE USE
IMMEDIATELY. CONTACT ELATION
• NEVER DRINK HAZER LIQUID. IF IT IS INGESTED, CALL A DOCTOR
IMMEDIATELY. IF HAZER LIQUID COMES IN CONTACT WITH SKIN OR
EYES, RINSE THOROUGHLY WITH WATER.
• USE ONLY THE HIGH-QUALITY HAZER LIQUID THAT YOUR DEALER
RECOMMENDS.
• ALWAYS MAKE SURE THERE IS SUFFICIENT LIQUID IN THE HAZER
LIQUID TANK. OPERATING THIS UNIT WITHOUT LIQUID MAY CAUSE
PERMANENT DAMAGE TO THE MACHINE.
® FOR FUTHER INSTRUCTIONS.
• Keep this device dry at all times. Do not spill water or other liquids in to
or on to your haze machine. Be sure that all the haze fluid is kept inside
the fluid reservoir.
• Be sure to save the packing carton in case you may ever have to return
the unit for service.
• Never overfill the unit’s reservoir. Overfilling may cause the unit to clog.
• This unit is designed for interior use only. Do not use this unit outdoors.
• Be sure that the local power outlet match that or the required voltage for
your haze machine.
• Do not attempt to operate this unit if the power cord has been frayed or
broken. Please route your power cord out of the way of foot traffic.
• Do not attempt to remove or break off the ground prong from the electri-
cal
cord. This prong is used to reduce the risk of electrical shock and fire in
case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the top cover under any conditions. There are n
serviceable parts inside.
• Disconnect the unit’s main power when left unused for long periods of
o user
time.
• Never connect this unit to a dimmer pack
• Always be sure to mount this unit in area that will allow proper ventila-
tion. Allow about 6” (15cm) between this device and a wall.
• Never block the ventilation holes.
• Do not attempt to operate this unit, if it becomes damaged in any way.
• Never operate this unit when it’s cover is removed.
• For adult use only. Hazer must be installed out of the reach of children.
• Never leave the unit running unattended.
• Never aim the output at open flames.
• Never add flammable liquids of any kind (oil, gas, perfume) to the hazer
liquid.
• Use only Elation® brand haze liquid.
• Always make sure there is sufficient liquid in the hazer liquid tank.
Operating this unit without liquid may cause permanent damage to the
machine.
• Always mount this unit in an upright position.
©Elation Professional® - www.elationlighting.com - Pro Haze DMX™ Instruction Manual Page 4©Elation Professional® - www.elationlighting.com - Pro Haze DMX™ Instruction Manual Page 3
Pro Haze DMX™ Features
Pro Haze DMX™ Warranty
• No Warm-Up time
• 560 watt professional heater core.
• 2500 cubic feet of haze output.
• Rear on/off switch
• Built in fuse protection
• 2.5 liter tank capacity.
• Wired timer/volume remote control.
• Standard DMX-512 protocol.
Pro Haze DMX™ General Instructions
Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit. These
instructions contain important information regarding safety during
use and maintenance. Please keep this manual with the unit, as
future reference.
Pro Haze DMX™ Unpacking
Every Pro Haze DMX™ has been thoroughly tested and has been
shipped in perfect operating order. Carefully check the shipping carton
for damage that may have occurred during shipping. If the carton
appears to be damaged, carefully inspect your fixture for any damage
and be sure all equipment necessary to operate the system has arrived
intact. In the case damage has been found or parts are missing, please
contact our toll free customer support number for further instructions.
The PRO HAZE DMX™ hazer carries a one year limited warranty. We
recommend you fill out the enclosed warranty card to validate your
purchase. All returned service items whether under warranty or not,
must be freight pre-paid and accompany a R.A. Number. If the unit is
under warranty, you must provide a proof of purchase invoice.
Pro Haze DMX™ Set Up
Before beginning initial setup of your Elation® Pro Haze DMX,™ make
sure that there is no evident damage caused in transit. In the event
that the unit’s housing or power cable is damaged do not attempt to
use. Contact Elation® customer support for assistance.
• Remove all packing materials from shipping box. Be sure all foam
and plastic padding is removed.
• Place the hazer on a flat surface and remove the hazer reservoir
cap.
• Note: The maximum fluid level mark is located on the rear of the
hazer, do not fill fluid beyond this mark.
• Fill the reservoir only with hazer liquid, being careful not to exceed
the maximum fluid level. DO NOT OVERFILL. Use only Elation®
brand haze liquid. Any other types of fluid can damage the unit.
When liquid level reaches the fill line, place cap back on liquid
tank.
• Your hazer may be operated with or without a remote controller. If
you will be controlling your unit remotely, firmly attach the remote
control cable before plugging the unit in. If you do not operate
with a controller, the unit will automatically haze until the unit is
turned off.
©Elation Professional® - www.elationlighting.com - Pro Haze DMX™ Instruction Manual Page 5
©Elation Professional® - www.elationlighting.com - Pro Haze DMX™ Instruction Manual Page 6