Elation Palm Copilot User Instructions
Palm Copilot
Rev 1.2
P/N:24-004-2295-00
Introduction
Features
Congratulations and thank you for purchasing the Elation Palm Copilot. The Palm Copilot is a simple 8
channels DMX controller and may be used to link with LC-8P series relay pack for control.It is available
in DMX output and Analog output mode.
USITT DMX512(1990 protocol) control
Be available in DMX output and ANALOG output(Selectable)
Specifications
Power Input...................................................................................DC9~12V
Channel Output ..........................................DMX output and Analog output
Connects ...................................................3-pin XLR connector & DB-9pin
Dimensions........ ................................................................. 120x80x35mm
Total Weight.........................................................................................240g
Power by external adaptor or battery
Output modes was programmed by 10 way DIP-Switch
Touch button
Power failure memories
Accessories...........................................AC/DC Adaptor UL/VDE(included)
...........Cradle(Sold Separately)
Cradle(Sold Separately)
Function Instructions
Madein PRC
DCIN: 9-12V 200mA Min.
ON OFF
DMX
Out
ControlOutput 1-8
RS
ON
10987654321
ControlOutput 1-8
1=+12V
2=CH4
3=4=CH3
CH2
5=CH1
6=
7=
8=
CH8
CH7
CH6
9=CH5
10=GND
DMXAddress Setting
12345678910
ON
RS
1
2
4
8
16
32
64
128
256
DMX
Analog
1234
5
6
789
10
1
2
3
4
6
7
8
5
Palm Copilot
1
2
3
4
5
6
7
1.Touch button (Indicator) 1~8
2.DC socket: Connects power input with DC 9~12V,200mA Min
3.Power Switch: Used to power on/off the unit
4.DB-9: Connects relay pack to control output 1~8
5.3-pin XLR female connector: Connects lighting fixtures and output DMX signal
6.Dip-switch 1~10: Programs output mode
Front Panel Rear panel
7.Battery cover
Top View
1
Loading...