Elation OPTO BRANCH 6 RJ45 User Manual
ELATION
|
|
OPTO BRANCH 6 RJ45
OPTO BRANCH 6 RJ45™
™
user manual
user manual
Elation Professional B.V. | Junostraat 2 | 6468 EW Kerkrade, Netherlands
Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040
www.elationlighting.com
©2015 ELATION PROFESSIONAL all rights reserved. Information, specifications,
diagrams, images, and instructions herein are subject to change without notice.
ELATION PROFESSIONAL logo and identifying product names and numbers herein
are trademarks of ELATION PROFESSIONAL. Copyright protection claimed includes
all forms and matters of copyrightable materials and information now allowed by
statutory or judicial law or hereinafter granted. Product names used in this
document may be trademarks or registered trademarks of their respective
companies and are hereby acknowledged. All non-ELATION brands and product
names are trademarks or registered trademarks of their respective companies.
ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all
liabilities for property, equipment, building, and electrical damages, injuries to any
persons, and direct or indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a result of the improper,
unsafe, insufficient and negligent assembly, installation, rigging, and operation of
this product.
323-582-3322 | 323-832-9142 fax | www.elationlighting.com | info@elationlighting.com
+31 45 546 85 66 | +31 45 546 85 96 fax | www.elationlighting.eu | info@elationlighting.eu
DOCUMENT VERSION
Please check www.elationlighting.com for the latest revision/update of this manual.
Date
5/2015 1 Initial Release.
Document
Version
Notes
2 OPTO BRANCH 6 RJ45™ User Manual Version 1
CONTENTS
General Information 4
Warranty 6
Safety Instructions 7
Device Overview 8
Technical Specifications 9
Optional Accessories 10
www.elationlighting.com
3 OPTO BRANCH 6 RJ45™ User Manual Version 1
www.elationlighting.com
GENERAL INFORMATION
INTRODUCTION
The OPTO BRANCH 6 RJ45™ is a single rack space 6-way DMX/RDM data splitter /
amplifier with Neutrik EtherCON/RJ45 master input and output, a link / terminate
button for easy troubleshooting, (6) Neutrik EtherCON/RJ45 isolated outputs, and
a auto switching power supply (100-240v 50/60Hz).
UNPACKING
Every unit has been thoroughly tested and has been shipped in perfect
operating condition. Carefully check the shipping carton for damage that may
have occurred during shipping. If the carton appears to be damaged, carefully
inspect your unit for damage and be sure all accessories necessary to operate
the unit have arrived intact. In the event damage has been found or parts are
missing, please contact our customer support team for further instructions. Please
do not return this unit to your dealer without first contacting customer support at
the number listed below. Please do not discard the shipping carton in the trash.
Please recycle whenever possible.
BOX CONTENTS
Rack Mounting Hardware
Manual & Warranty Card
4 OPTO BRANCH 6 RJ45™ User Manual Version 1
Loading...