
to change without any prior written notice.
AGENT OR SIMILARLY QUALIFIED PERSON IN ORDER TO AVOID A HAZARD.
©Elation Lighting® Los Angeles, CA. 90058 - www.elationlighting.com - Master Blaster 1500 Page 2
©Elation Lighting® Los Angeles, CA. 90058 - www.elationlighting.com - Master Blaster 1500 Page 2

fog machines on the market today!
The Master Blaster™ Series commercial fog machines
form reliably for years when the guidelines in this booklet are followed. Please read and understand
the instructions in this manual carefully and thoroughly before attempting to operate this unit. These
Thank you for purchasing the Master Blaster 1500™
by Elation Professional®.
tion. Carefully check the shipping carton for damage that may have occurred during shipping. If the
tion. You may also visit us on the web at www.elationlighting.com for any comments or suggestions.
Service Hours are Monday through
support@elationlighting.com
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or
There are no user serviceable parts inside this unit. Do not attempt any repairs yourself,
Please do not discard the shipping carton in the trash. Please recycle when ever possible.
The Master Blaster 1500™ carries a two year (730 days) limited
warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service
tion (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A
TOWARDS PEOPLE OR THEIR CLOTHING. THIS FOG
HOT VAPOR AND SHOULD BE USED WITH THE SAME CARE THAT
point the output nozzle directly into peoples faces
the fog machines output at least two (2) feet away from people and surfaces.
this unit in a well ventilated area.
attempt to service or repair this unit while plugged in to a power source.
©Elation Lighting® Los Angeles, CA. 90058 - www.elationlighting.com - Master Blaster 1500 Page 3

touch the output nozzle while the unit is plugged in.
the printed warning labels on the rear of the unit.
use this unit if it becomes in disrepair.
use oil based fog liquid!
that comes mounted into the unit. The remote may be removed, by unscrewing the four (4) thumb
screws that hold it to the base. The unit also contains a removable, one gallon reservoir. The unit is
ELECTRONIC THERMAL SENSING (E.T.S.):
This feature allows you to have fog output
temperature of the fog machine. When the fog machine drops one degree in temperature the E.T.S.,
supply of Elation Fog Juice™ in the fluid reservoir. Running the fog machine dry will cause pump
failure and or clogging. This is the largest cause of failure in fog machines. Once the machine is
The unit has a warm up time of ten (10) minutes and during this time “
30 seconds. If fog does not emit from the nozzle after holding down the green “MANUAL” button for
30 seconds, check the fluid tank and hose to make sure there is fluid going through the hose. If fluid
Only Elation Fog Juice™ is recommended and not all fog juice is created equal, use of fog
brand may cause clogging and/or damage the unit and will void your man-
After the unit has warmed to the proper operating temperature, “
the green “MANUAL” button. Fog will continue to emit as long as you hold down the button or until
the heater reaches the end of it’s cycle an must reheat. You will have approximately 30 seconds of
fog burst before the unit has to recycle and reheat.
Do not continue to push the remote output but-
Do not continue to push the remote output but-
You can also operate the fog output automatically by using the timer settings on the remote, see
©Elation Lighting® Los Angeles, CA. 90058 - www.elationlighting.com - Master Blaster 1500 Page 4

The Master Blaster 1500 is DMX compatible, and may be triggered with a stan-
Show Designer™ or DMX Operator.™ After the unit
Do not continue to push the remote output button
Do not continue to push the remote output button
as this may severely damage your unit.
as this may severely damage your unit.
You may change the DMX address by pressing the “UP” and
MANUAL REMOTE CONTROL OPERATION:
The remote control comes attached to your fog
function remote control. The remote control comes connected to the unit, but is easily removed by
will indicate different functions.
Interval, Duration, Timer
- This button allows you turn the timer function on and off.
- This button allows you to override any setting and manually burst full output for as
- This button activates a constant flow of fog.
At start up the fogger will run a self test and display
for approximately two (2) seconds. During Warm-Up the Display will indicate this function. During
this time you will be able to make any time and volume adjustments, but the fogger will have no out-
This function allows you to set the time interval between fog burst in timer mode, from
©Elation Lighting® Los Angeles, CA. 90058 - www.elationlighting.com - Master Blaster 1500 Page 5

To set the interval, press the
This function allows you to set the time the fog will burst when in the timer mode.
You can adjust the time the fogger will burst from one second to 200 seconds.
To set the duration press the
This function allows you to set the output (volume) of fog that will burst when in the timer mode.
You can adjust the output of the fogger from 1% (almost no output) to 100% (full output).
To set the output amount press the
buttons to adjust the output (volume) from 1% to 100%.
This Function allows you to set the fogger on an automatic setting. You can set the
Duration, and Timer Output
button to turn the automatic timer on and off.
When activated, this function will give you a constant steady flow of fog from a small stream to a
To turn the volume function on simply press the volume button. Press again to shut off.
buttons to adjust the volume output from 1% to 100%. 1% will
The volume can also be adjusted when in the volume mode, simply press the
buttons to achieve your desired output.
If you experience low fog output, pump noise, or no
fog output at all, disconnect and discontinue use immediately. Do not attempt to continue push-
the external fuse or breaker, remote connection, and be sure the wall outlet is sending power. If all
authorized dealer or service center.
©Elation Lighting® Los Angeles, CA. 90058 - www.elationlighting.com - Master Blaster 1500 Page 6

2 YEAR (730 DAYS) LIMITED WARRANTY
2 YEAR (730 DAYS) LIMITED WARRANTY
A. Elation® hereby warrants, to the original purchaser, Elation® products to be free of manufacturing
A. Elation® hereby warrants, to the original purchaser, Elation® products to be free of manufacturing
This warranty shall be valid only if the product is purchased within the United States of America,
warranty, Elation® will pay return shipping charges only to a designated point within the United States.
shipped with the product. If any accessories are shipped with the product, Elation® shall have no
workmanship. The sole responsibility of Elation® under this warranty shall be limited to the repair of
the product, or replacement thereof, including parts, at the sole discretion of Elation®. All products
without any obligation to include these changes in any products theretofore manufactured.
warranties made by Elation® in connection with this product, including warranties of merchantability
warranties and written descriptions of warranty terms and conditions heretofore published.
©Elation Lighting® Los Angeles, CA. 90058 - www.elationlighting.com - Master Blaster 1500 Page 7
©Elation Lighting® Los Angeles, CA. 90058 - www.elationlighting.com - Master Blaster 1500 Page 7

4295 Charter Street Los Angeles, CA 90058 USA
Tel: 323-582-3322 / Fax: 323-582-3108
Web: www.elationlighting.com / E-mail: info@elationlighting.com
ELECTRONIC THERMAL SENSING
25,000 cubic feet per minute
Water Base Elation Fog Juice™
OR THEIR CLOTHING. FOG MACHINES EXTREMELY EMIT HOT
VAPOR AND SHOULD BE USED WITH THE SAME CARE THAT
YOU WOULD OBSERVE WHEN USING AN ELECTRIC KETTLE OR
TO HELP PREVENT YO UR UNIT FROM CLOGGING, USE
CLEAN MACHINE™ LIQUID. CLEAN MACHINE
QUART BOTTLES FROM YOUR LOCAL ELATION