EKWB EK-Loop Connect Installation manual

EKLoop
Connect

CONTROLLER

INSTALLATION MANUAL

This product is intended for installation only by expert users. Please
consult with a qualified technician for installation. Improper installation
may result in damage to your equipment. EK Water Blocks assumes no
liabilit y whatsoever, expressed or implied, for the use of these pro ducts,
nor their installation. The following instructions are subject to change
without notice. Please visit our web site at www. ekwb.com for updates.
Before installation of this product please read important notice,
disclosure and warranty conditions printed on the back of the box.

This guide details the physical installation of your EK-Loop
Connect controller and all of the standard connections which may
be used to link your components.

- 2 -

TABLE OF CONTENT

INSTALLING THE EK-LOOP CONNECT IN TO THE CHASSIS 4
CONNECTING THE FAN-S 5
CONNECTING THE D-RGB LED 6
TEMPERATURE SENSOR 6
CONNECTING THE USB CABLE 7
CONNECTING THE POWER ADAPTER 8
SOFTWARE 8
SUPPORT AND SERVICE 9
SOCIAL MEDIA 9

- 3 -