Eizo LA-131-D User Manual
g
g
pp
g
jury
Thank you very much for choosing the EIZO product.
Please read this User’s Manual carefully to familiarize yourself with safe and effective usage procedures.
Please retain this manual for future reference.
[Location of the Caution Statements]
PRECAUTIONS
To ensure personal safety and proper maintenance, please read this
section and the caution statements on the unit.
WARNING
Attach the applicable EIZO LCD monitor only.
Not doin
equipment damage.
Attach the arm with another person.
Do not attach it alone. Doing so may result in injury or equipment damage.
Affix the arm with the enclosed fixing screw(s).
Not doin
equipment damage.
Affix the arm securely on the base.
Not doing so may cause the monitor to fall and result in injury or equipment damage.
Affix the arm on an appropriate base.
Do not affix the arm on such a base as shown below or on a weak base which cannot
su
fall and result in injury.
Clamp the knob of the arm tightly.
If the arm becomes unstable, clamp the knob of the arm securely again. Loose
clamping may cause the monitor to fall and result in injury or equipment damage.
Do not hang from or lean on the arm.
Doin
damage.
When moving the arm, be sure not to pinch a finger between the moving parts.
When rotating the monitor for portrait display, make a space enough between a
desk and a monitor not to pinch a finger.
Do not disassemble.
The spring mechanism inside of the stand may result in in
when disassembling.
so may cause the arm or monitor to fall, which may result in injury or
so may cause the arm or monitor to fall, which may result in injury or
ort the monitor or arm. Affixing the arm on these bases may cause the monitor to
Not hooking enough On tapered desk On Pole On Wall
so may cause the monitor to tumble or fall and result in injury or equipment
or equipment damage
Package Contents
Please contact your local dealer for assistance if any of the listed items are missing or damaged.
Arm Unit (Clamping Part / Arm Part / Attaching-monitor Part)-
Arm Cover, 2 pcs
User's Manual
Sheet (Compatible Screws List)
Mounting Screws, 4 pcs each (For the compatible screw and monitors, refer to the ‘Compatible Screws List’)
Fixing Screws M4 x 16, 2 pcs
Fixing screws are put into the different bag from the bag which the mounting screws (8 pcs) are into.
Compatible Monitors and Desks
Monitors
Supported Weight* 4.0 kg to 9.0 kg
Hole Spacing 100 mm x 100 mm (VESA compatible)
*Weight : Total weight of the monitor including the weight of the
cables and optional peripherals.
Desks
Thickness and
Depth
Weight
Capability
Refer to right figure
60 kg min. (recommended)
How to attach the monitor
1. Clamp the Clamping Part to the edge of the desk.
Press the fitting against the edge of the desk and clamp with turning the
knob counter-clockwise.
________________________________
____________________
25~60mm
Desk
More than 50mm
_________________________
Press against
the desk
2. Attach the Arm Part to the Clamping Part.
(1) Connect the Arm Part to the Clamping Part.
(2) Fix with the enclosed fixing screw.
Clamping Part
Knob
(1)
(2)
Arm Part
Clamping Part
3. Attach the Attaching-monitor Part to the monitor.
Use specified screws for tightening up referring to the ‘Compatible Screws List’.
Fixing Screw
Loading...