Page 1
Thank you very much for choosing the EIZO product.
y
pp
g
jury
Please read this User’s Manual carefully to familiarize yourself with safe and effective usage procedures.
Please retain this manual for future reference.
PRECAUTIONS
[Location of the Caution Statements]
zTo ensure personal safety andproper maintenance,please read this
section and the caution statements on the unit.
WARNING
zAttach the arm to the LCD monitor that weights between 2.5 kg and 5.5 kg.
Not doing so ma
equipment damage.
zAffix the arm securely on the base.
Not doing so may cause the monitor to fall and result in injury or equipment damage.
zAffix the arm on an appropriate base.
Do not affix the arm on such a base as shown below or on a weak base which cannot
ort the monitor or arm. Affixing the arm on these bases may cause the monitor to
su
fall and result in injury.
Not hooking enough On tapered desk On Pole On Wall
cause the arm or monitor to fall, which may result in injury or
zClamp the screws of the arm tightly.
If the arm becomes unstable, clamp the hex-head screws of the arm securely again.
Loose clamping may cause the monitor to fall and result in injury or equipment damage.
zDo not hang from or lean on the arm.
zWhen moving the arm, be sure not to pinch a finger between the moving parts.
zWhen rotating the monitor for portrait display, make a space enough between a
zDo not disassemble.
zAttach the arm with another person.
so maycause the monitor to tumble or fall and result in injury or equipment
Doin
damage.
desk and a monitor not to pinch a finger.
The spring mechanism inside of the stand may result in in
when disassembling.
Do not attach it alone. Doing so may result in injury or equipment damage.
or equipment damage
Page 2
Package Contents
t
________________________________
Please contact your local dealer for assistance if any of the listed items are missing or damaged. Use specified
screws for tightening up between arm, fitting and monitor referring to the back of this manual.
zArm
zUser's Manual
zFitting
zArm Cover x 2 pcs
zStand Mounting Cover
zHex-head wrench
zMounting Screws M4 x 8 (black) x 4 pcs
zMounting Screws M4 x 12 (silver/long) x 4 pcs
zMounting Screws M4 x 8 (silver/short) x 4 pcs*
*Screws for attaching the monitor with fitting to arm when the monitor’s hole spacing is 100 mm x 100 mm.
Compatible Monitors and Desks
zMonitors
Weight Capability* 2.5 kg to 5.5 kg
Hole Spacing 75 mm x 75 mm / 100 mm x 100 mm
(VESA compatible)
____________________
M4
M4
75mm
75mm
100mm
100mm
*Weight : Total weight of the monitor including the weight of the
cables and optional peripherals.
zDesks
Weight Capability 50 kg min. (recommended)
Thickness and Depth Refer to right figure
How to attach the monitor
_________________________
20~55mm
Desk
More than 38mm
1. Unfold the arm before affixing the arm to the base.
[LA-130-D] [LA-120-D]
(For packing) (For mounting) (For packing) (For mounting)
2.
Clamp the arm to the edge of the desk.
(1) Press the desk clamp against the edge of
the desk.
(2) Fit the holes on the base of arm to
hex-threaded-hole.
(3) Drive two screw holes by turns with
Desk
Press agains
the desk
hex-head wrench. After clamping the
arm, covering the screw holes with Stand
Mounting cover.
NOTE
zThe arm may not affix firmly to the base if driving either screw in tightly.
zIf attaching the LA-120-D, bend the arm slightly forward in advance. Not doing so may scratch the
arm by a hex-head wrench.
Fit the holes
Page 3
3. Attach the monitor to the arm.
Use specified screws for tightening up between arm, fitting and monitor referring to the back of this
manual.
<The monitor employing 75 mm x 75 mm arm mounting holes>
(1) Attach the arm to the monitor with specific screws (M4 x 8 (black) or M4 x 12 (silver/long),
4 points).
(2) Put in the covers to the shield plate with sliding them rightward or leftward.
(1)
NOTE
Adjust the angle of the monitor to face upward slightly so that the cover can be mounted easily.
z
<The monitor employing 100 mm x 100 mm arm mounting holes>
(1) Mount the fitting on the rear of monitor with specific screws (M4 x 8 (black) or M4 x 12
(silver/long), 4 points).
(2) Hook the monitor with fitting of to the arm.
(3) Attach the arm to the monitor with fitting by using screws (M4 x 8 (
(4) Put in the covers to the shield plate with sliding them rightward or leftward.
(2)
silver/short), 4 points).
(1)
NOTE
(2)
(3)(4)
zAdjust the angle of the monitor to face upward slightly so that the cover can be mounted easily.
4. Lead the power cord and signal cable into the cable holder at inner side of the arm.
[LA-130-D] [LA-120-D]
Cable Holder
Cable Holder
NOTE
zThe number of cable holder may differ from each model.
zThe cables are recommended to lead with slight sag for the smooth motion of the monitor for
portrait display.
Page 4
Specifications
LA-130-D
Dimension
(W) x (H) x (D)
Weight 2.8 kg / 6.2 lbs
Dimensions
____________________________________
130 (5.1) x 303.8 ~ 466.1 (12.0 ~ 18.4) x 275.6 ~ 495.8 (10.9 ~ 19.5) mm (inch)
Unit: mm (inch)
To p
LA-120-D
Dimension
(W) x (H) x (D)
Weight 2.5 kg / 5.5 lbs
Dimensions
Side
Front
130 (5.1) x 259.2 ~ 421.5 (10.2 ~ 16.6) x 130.6 ~ 350.8 (5.1 ~ 13.8) mm (inch)
Unit: mm (inch)
To p
Side
Front
NOTE
zThe value within the dimensions drawing is only for reference, and range of motion may differ
according to the installed condition.
Page 5
LIMITED WARRANTY
EIZO NANAO CORPORATION (“EIZO”) and EIZO’s authorized distributors warrant to the original
purchaser that this product shall be free from defects in material and workmanship for a period of one (1) year
from the date of purchase. The service parts stock for the product shall be maintained for five (5) years after
the production is discontinued. This warranty is valid only in the countries where EIZO’s authorized
distributors are located.
In the event of malfunction of the product during the warranty period attributable directly to defective material
and/or workmanship, EIZO and EIZO’s authorized distributors will, at their option, either repair or replace the
defective product. EIZO and EIZO’s authorized distributors shall have no obligation under this warranty,
however, in the following cases:
(a) Any defect of the product caused by freight damage, modification, alteration, abuse, misuse, accident,
incorrect installation, disaster, faulty maintenance or improper repair by third party other than EIZO
and EIZO’s authorized distributors.
(b) Any incompatibility of the product due to possible technical innovations or regulations.
(c) Any deformation, discoloration, warp, loss of brightness or focus, or whatsoever due to normal
deterioration of the product.
(d) Any defect of the product caused by external equipment.
(e) Any defect of the product on which the original serial number has been altered or removed.
(f) Any exchange of products due to the normal depletion of consumables such as batteries.
To obtain service under this warranty, the original purchaser must deliver the product, freight prepaid,in its
original package or other adequate package affording an equal degree of protection, assuming the risk of
damage and/or loss in transit, to your local EIZO authorized distributor. The original purchaser must present
proof of purchase establishing the date of purchase of the product when requesting warranty service.
Warranty period for any replaced and/or repaired product under this warranty shall expire at the end of the
original warranty period.
EIZO OR EIZO’S AUTHORIZED DISTRIBUTORS ARE NOT RESPONSIBLE FOR ANY DAMAGE TO,
OR LOSS OF, DATA OR OTHER INFORMATION STORED IN ANY MEDIA OR ANY PART OF ANY
PRODUCT RETURNED TO EIZO OR EIZO’S AUTHORIZED DISTRIBUTORS FOR REPAIR.
EIZO AND EIZO’S AUTHORIZED DISTRIBUTORS MAKE NO FURTHER WARRANTIES, EXPRESS OR
IMPLIED, WITH RESPECT TO THE PRODUCT AND ITS QUALITY, PERFORMANCE,
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR USE. IN NO EVENT SHALL EIZO OR
EIZO’S AUTHORIZED DISTRIBUTORS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL,
CONSEQUENTIAL OR OTHER DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION,
OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OR INABILITY TO USE THE
PRODUCT OR IN ANY CONNECTION WITH THE PRODUCTS, WHETHER BASED ON CONTRACT,
TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, EVEN IF EIZO OR EIZO’S AUTHORIZED
DISTRIBUTORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS
EXCLUSION ALSO INCLUDES ANY LIABILITY WHICH MAY ARISE OUT OF THIRD PARTY CLAIMS
AGAINST THE ORIGINAL PURCHASER. THE ESSENCE OF THE PROVISION IS TO LIMIT THE
POTENTIAL LIABILITY OF EIZO AND EIZO’S AUTHORIZED DISTRIBUTERS ARISING OUT OF THIS
LIMITED WARRANTY AND/OR SALES.
Page 6
Recycle Auskunft
Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland
zusammen mit dem Partner eds-r gmbh rücknahmesysteme. Dort werden die Geräte in ihre
Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden. Um einen Abholtermin
zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen Sie bitte folgende Rufnummer:
02153-73 35 00. Weitere Informationen finden Sie auch unter der Internet-Adresse:
www.eizo.de.
Recycling Information for customers in Switzerland:
All recycling information is placed in the SWICO’s website.
http://www.swico.ch
Recycling-Information für Kunden in der Schweiz:
Alle Informationen zum Thema Recycling finden Sie auf der Homepage des Brancheverbandes
SWICO.
http://www.swico.ch
Renseignements de recyclage pour les clients en Suisse:
Vous trouvez tous les renseignements pour le sujet de recyclage sur la page WEB de I’UNION DE
BRAN CHE SWICO.
http://www.swico.ch
Recycling Information for customers in USA:
All recycling information is placed in the EIZO Nanao Technologies, Inc’s website.
http://www.eizo.com/contact/index.html
Återvinnings information för kunder i Sverige:
All information om återvinning finns på Eizo Europe AB:s hemsida:
www.eizo.se
Loading...