Eizo LA-121-DD, LA-121-DA User Manual

Thank you very much for choosing the EIZO product.

g

pp

jury

jury

Please read this User’s Manual carefully to familiarize yourself with safe and effective usage procedures.
Please retain this manual for future reference.

PRECAUTIONS

[Location of the Caution Statements]

zTo ensure personal safety and proper maintenance,please read this

section and the caution statements on the unit.

WARNING

z

Attach the applicable EIZO LCD monitor only.

Not doin
equipment damage.

z

Attach the arm with another person.

Do not attach it alone. Doing so may result in injury or equipment damage.

Affix the arm securely on the base.

z

Not doing so may cause the monitor to fall and result in injury or equipment damage.

Affix the arm on an appropriate base.

z

Do not affix the arm on such a base as shown below or on a weak base which cannot
su
fall and result in injury.

so maycause the arm or monitor to fall, which may result in injury or

ort the monitor or arm. Affixing the arm on these bases may cause the monitor to

Not hooking enough On tapered desk On Pole On Wall

zClamp the knob of the arm tightly.

If the arm becomes unstable, clamp the knob of the arm securely again. Loose
clamping may cause the monitor to fall and result in injury or equipment damage.

zDo not hang from or lean on the arm.

Doing so may cause the monitor to tumble or fall and result in in
damage.

zWhen moving the arm, be sure not to pinch a finger between the moving parts.

zWhen rotating the monitor for portrait display, make a space enough between a

desk and a monitor not to pinch a finger.

zDo not disassemble.

The spring mechanism inside of the stand may result in in
when disassembling.

or equipment damage

or equipment

Package Contents

p

Please contact your local dealer for assistance if any of the listed items are missing or damaged.

zArm

zUser’s Manual

zSheet (Compatible Screws List)

zMounting Screws, 4 pcs each

(For the compatible screws and monitors, refer to the ‘Compatible Screws List’.)



NOTE

zThe power cable and signal cable are wired to the arm.

________________________________

Compatible Monitors and Desks

z

Monitors

Supported Weight* 2.3 kg to 5.2 kg

Hole Spacing 75 mm x 75 mm / 100 mm x 100 mm

(VESA compatible)

*Weight : Total weight of the monitor including the weight of the

cables and optional peripherals.

z

Desks

Thickness and
Depth

Weight Capability 50 kg min. (recommended)

How to attach the monitor

1. Clamp the arm to the edge of the desk.

Press the fitting against the edge of the desk and clam
turning the knob counter-clockwise.

Refer to right figure

_________________________

____________________

M4

M4

75mm

75mm

Desk

20~60mm

with

100mm

100mm

More than 50mm

Press against
the desk

2. Attach the monitor to the arm.

Use specified screws for tightening up referring to the ‘Compatible Screws List’.

When attaching the monitor employing 75 mm x 75 mm arm
mounting holes, use the inner holes on the shield plate.
When attaching the monitor employing 100 mm x 100 mm arm
mounting holes, use the outer holes on the shield plate.

Outer
Holes

Knob

Inner

Holes

Screw

3. Connect the signal cable and the power cord.

To the power connector
of the monitor

To the signal input
connector of the monitor



NOTE

The arm has the capability of pivoting the monitor by removing the stopper (screws) in side of the

z

shield plate.
Please consult the monitor manufacturer about the pivoting capability of the monitor.

Connect the power cord.

LA-121-DA:
Connect the signal cable.
LA-121-DD:

Connect the computer.

Stopper

Shield Plate

Specifications

Dimension (W) x (H) x (D) 150 (5.9) x 556 ~ 264 (21.9 ~ 10.4) x 206 ~ 556 (8.1 ~ 21.9) mm (inch)

Weight 3.7 kg (8.2 lbs.)

Power Cord 125 V, 7A, 1.2 m

Signal Cable LA-121-DA: D-Sub mini 15 pin - D-Sub mini 15 pin, 1.2 m

Dimensions

____________________________________

LA-121-DD: DVI-D 25 pin - DVI-D 25 pin, 3.0 m

Unit: mm (inch)



NOTE

zThe value within the dimensions drawing is only for reference, and range of motion may differ

according to the installed condition.

LIMITED WARRANTY

EIZO NANAO CORPORATION (“EIZO”) and EIZO authorized distributors warrant, subject to and in
accordance with the terms of this warranty, to the original purchaser who purchased the product from EIZO or
EIZO authorized distributors that this product shall be free from defects in material and workmanship for a
period of one (1) year from the date of purchase, and that, in the event of malfunction of the product during the
warranty period attributable directly to defective material and/or workmanship, EIZO and EIZO authorized
distributors will, at their sole discretion, either repair or replace the defective product. EIZO and EIZO
authorized distributors shall bear no other liability or obligation under this warranty. EIZO and EIZO
authorized distributors cease to bear any obligation under this warranty with regard to any parts of the product
upon expiration of five (5) years after the production of such parts is discontinued. This warranty is valid only
in the countries or territories where the EIZO authorized distributors are located. This Limited Warranty does
not restrict legal rights as granted by implied warranty against the vendor.

Furthermore, EIZO and EIZO authorized distributors shall have no obligation under this warranty whatsoever
in respect of any of such defects, or in any of such cases, as set forth below:

Any defect of the product caused by freight damage, modification, alteration, abuse, misuse, accident, incorrect
installation, disaster, faulty maintenance and/or improper repair by third party other than EIZO and EIZO
authorized distributors.

To obtain service under this warranty, the original purchaser must deliver the product, freight prepaid, in its original
package or other adequate package affording an equal degree of protection, assuming the risk of damage and/or loss
in transit, to the local EIZO authorized distributor. The original purchaser must present proof of purchase
establishing the date of purchase of the product when requesting warranty service.

Warranty period for any replaced and/or repaired product under this warranty shall expire at the end of the
original warranty period.

EIZO AND EIZO AUTHORIZED DISTRIBUTORS MAKE NO FURTHER WARRANTIES, EXPRESSED OR
IMPLIED, WITH RESPECT TO THE PRODUCT AND ITS QUALITY, PERFORMANCE, MERCHANTABILITY
OR FITNESS FOR ANY PARTICULAR USE. IN NO EVENT SHALL EIZO OR EIZO AUTHORIZED
DISTRIBUTORS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHER
DAMAGE WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFIT,
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS)
ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT OR IN ANY CONNECTION WITH
THE PRODUCT, WHETHER BASED ON CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY OR
OTHERWISE, EVEN IF EIZO OR EIZO AUTHORIZED DISTRIBUTORS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. THIS EXCLUSION ALSO INCLUDES ANY LIABILITY WHICH MAY
ARISE OUT OF THIRD PARTY CLAIMS AGAINST THE ORIGINAL PURCHASER. THE ESSENCE OF THE
PROVISION IS TO LIMIT THE POTENTIAL LIABILITY OF EIZO AND EIZO AUTHORIZED
DISTRIBUTORS ARISING OUT OF THIS LIMITED WARRANTY AND/OR SALES.