Eizo LA-011-W, LA-030-W User Manual 2



p

g

y

g

jury

Thank you very much for choosing an EIZO product.
Please read this User’s Manual carefully to familiarize yourself with safe and effective usage procedures.
Please retain this manual for future reference.

[Location of the Caution Statements]

(Example: LA-030-W)

PRECAUTIONS

 To ensure personal safety and proper maintenance, please read this

section and the caution statements on the unit.

WARNING

 Do not attempt to install the unit yourself.

To install the monitor with this
techniques. Refer the installation to qualified personnel.

 Attach the applicable EIZO LCD monitor only.

Not doing so may cause the arm or monitor to fall, which may result in injury or
equipment damage.

 Affix the arm with the enclosed fixing screw(s).

Not doin

so may cause the arm or monitor to fall, which may result in injury or

equipment damage.

 Affix the arm securely on the base.

Not doing so may cause the monitor to fall and result in injury or equipment damage.

 Affix the arm on an appropriate base.

Do not affix the arm on such a base as shown below or on a weak base which cannot
support the monitor or arm. Affixing the arm on these bases ma
fall and result in injury.

 Clamp the screws of the arm tightly.

If the arm becomes unstable, clamp the screws of the arm securely again. Loose
clamping may cause the monitor to fall and result in injury or equipment damage.

 Do not hang from or lean on the arm.

so may cause the monitor to tumble or fall and result in injury or equipment

Doin
damage.

 When moving the arm, be sure not to pinch a finger between the moving parts.

roduct, it is required the expert knowledge of building

cause the monitor to

Wall

Do not tilt No opening (Example: LA-030-W)

 Do not disassemble.

The spring mechanism inside of the stand may result in in
when disassembling.

 Attach the arm with another person.

Do not attach it alone. Doing so may result in injury or equipment damage.

or equipment damage

Package Contents

Please contact your local dealer for assistance if any of the listed items are missing or damaged.

 Arm Unit

-Attaching-wall Part

-Attaching-monitor Part

-Arm Part (Enclosed to LA-030-W)

 Arm Cover, 2 pcs

 User's Manual

 Sheet (Compatible Screws List)

 Mounting Screws, 4 pcs each

(For the compatible screws and monitors, refer to the ‘Compatible Screws List’.)

 Fixing Screw(s) M4 x 16: 1 pc (LA-011-W) / 2 pcs (LA-030-W)

(Fixing screw(s) is put into the different bag from the bag which the mounting screws are into.)

NOTE

 Screws for fixing wall anchor on the wall are not enclosed. Prepare appropriate screws in advance.

Compatible Monitors and Wall

 Monitors

Supported Weight* 4.0kg to 9.0 kg

Hole Spacing 100 mm x 100 mm (VESA compatible)

*Total weight of the monitor including the weight of the cables and optional peripherals.

 Wall

Thickness and Depth Refer to right figure

Weight Capability More than 130 kg

How to attach the monitor

Use specified screws for tightening up referring to the ‘Compatible Screws List’.

________________________________

______________________

Unit: mm (inch)

_________________________

How to attach the monitor: LA-011-W

1.

Attach the Attaching-wall Part of the arm on the wall.
Fix them with screws (4 pcs).

2.

Attach the Attaching-monitor Part to the monitor.

(1) Attach the Attaching-monitor Part to the monitor with specific screws (4 points).
(2) Put in the arm covers to the shield plate with sliding them rightward or leftward.

(1)

Wall

Screws (4 pcs)

(2)

Arm covers

Mounting screws (4 pcs)