Eizo L375 User Manual

User’s Manual

Color LCD Monitor

English

p

SAFETY SYMBOLS

This manual uses the safety symbols below. They denote critical information. Please read them
carefully.

WARNING

Failure to abide by the information in a WARNING may result in serious injury and
can be life threatening.

CAUTION

Failure to abide by the information in a CAUTION may result in moderate injury
and/or property or product damage.

Indicates a prohibited action.

Indicates to ground for safety.

Copyright© 2001 by EIZO NANAO CORPORATION. All rights reserved. No part of this
manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any
means, electronic, mechanical, or otherwise, without the prior written permission of Eizo Nanao
Corporation.
Eizo Nanao Corporation is under no obligation to hold any submitted material or information
confidential unless
said information. Although every effort has been made to ensure that this manual provides up­to-date information, please note that EIZO monitor specifications are subject to change without
notice.

ENERGY STAR is a U.S. registered mark.
Apple and Macintosh are registered trademarks of Apple Computer, Inc.
VGA is a registered trademark of International Business Machines Corporation.
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards
Association.
Windows is a registered trademark of Microsoft Corporation.
ScreenManager and PowerManager are trademarks of Eizo Nanao Corporation.
FlexScan and EIZO are registered trademarks of Eizo Nanao Corporation.

As an ENERGY STAR
product meets the ENERGY STAR guidelines for energy efficiency.

rior arrangements are made pursuant to Eizo Nanao Corporation's receipt of

®

Partner, Eizo Nanao Corporation has determined that this

2

English

TABLE OF CONTENTS

PRECAUTIONS...................................................................................... 4

1. INTRODUCTION .....................................................................................9

1-1. Features ........................................................................................................9

1-2. Package Contents..........................................................................................9

1-3. Controls & Connectors ..............................................................................10

2. CABLE CONNECTION ......................................................................... 12

2-1. Before connecting .......................................................................................12

2-2. Connecting the signal cable ........................................................................13

2-3. Connecting two PCs to the monitor............................................................15

3. ScreenManager.................................................................................... 17

3-1. How to use the ScreenManager ..................................................................17

3-2. ScreenManager Adjustments and Settings...................................................18

3-3. Useful Functions .........................................................................................19

4. ADJUSTMENT ...................................................................................... 21

4-1. Screen Adjustment ......................................................................................21

4-2. Displaying a low resolutions.......................................................................26

4-3. Color Adjustment .......................................................................................28

4-4. Power-save Setup ........................................................................................ 30

5. MAKING USE OF USB (Universal Serial Bus)................................... 32

6. ATTACHING AN ARM STAND ..............................................................34

7. TROUBLESHOOTING........................................................................... 36

8. CLEANING............................................................................................ 40

9. SPECIFICATIONS................................................................................. 41

10. GLOSSARY......................................................................................... 44

APPENDIX/ANHANG/ANNEXE .................................................................. i

TABLE OF CONTENTS

3

English

PRECAUTIONS

IMPORTANT!

• This product has been adjusted specifically for use in the region to which it was
originally shipped. If operated outside the region to which it was originally shipped,
the product may not perform as stated in the specifications.

• To ensure personal safety and proper maintenance, please read this section and the
caution statements on the unit (refer to the figure below).

[Location of the Caution Statements]

WARNING

If the unit begins to emit smoke, smells like something is burning, or
makes strange noises, disconnect all power connections immediately
and contact your dealer for advice.

Attempting to use a malfunctioning unit can be dangerous.

Do not dismantle the cabinet or modify the unit.

Dismantling the cabinet or modifying the unit may result in electric shock or
burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards.

4 PRECAUTIONS

English

p

WARNING

Keep small objects or liquids away from the unit.

Small objects accidentally falling through the ventilation slots into the cabinet
or spillage into the cabinet may result in fire, electric shock, or equipment
damage.

If an object or liquid falls/spills into the cabinet, unplug the unit immediately.
Have the unit checked by a qualified service engineer before using it again.

Place the unit on a strong, stable surface.

A unit placed on an inadequate surface may fall, resulting in injury or
equipment damage.

When the unit is dropped, please ask your dealer for advice. Do not continue
using a damaged unit. Using a damaged unit may result in fire or electric
shock.

Set the unit in an appropriate location.

Not doing so may cause damage and could result in fire or electric shock.

* Do not place in outdoors.
* Do not

etc.)

* Do not install in a dusty or humid environment.
* Do not place in a location where the steam comes directly on the screen.
* Do not place near heat generating devices or a humidifier.

To avoid danger of suffocation, keep the plastic packing bags away
from babies and children.

lace in the transportation system (ship, aircraft, trains, automobiles,

OK

Use the enclosed power cord and connect to the standard power outlet
of your country. Be sure to remain within the rated voltage of the
power cord.

Not doing so may cause in fire or electric shock.

To disconnect the power cord, grasp the plug firmly and pull.

Never tug on the cord, doing so may cause damage and could result in fire or

OK

electric shock.

PRECAUTIONS

5

English

jury

g

WARNING

The equipment must be connected to a grounded main outlet.

Not doing so may cause in fire or electric shock.

Use the correct voltage.

* Do not overload your power circuit, as this may result in fire or electric

shock.

* The unit is designed for use with a specific voltage only. Connection to

another voltage than specified in this User’s Manual may cause fire, electric
shock, or other damage.

* Do not overload your power circuit, as this may result in fire or electric

shock.

Handle the power cord with care.

* Do not place the cord underneath the unit or other heavy objects.
* Do not pull on or tie the cord.

If the power cord becomes damaged, stop using it. Use of a damaged cord
may result in fire or electric shock.

Never touch the plug and power cord if it begins to thunder.

Touching them may result in electric shock.

When attaching an arm stand, please refer to the user’s manual of the
arm stand and install the unit securely with the enclosed screws.

Not doing so may cause the unit to come unattached, which may result in

or equipment damage. When the unit is dropped, please ask your dealer

in
for advice. Do not continue usin
result in fire or electric shock. When reattaching the tilt stand, please use the
same screws and tighten them securely.

a damaged unit. Using a damaged unit may

Do not touch a damaged LCD panel directly with bare hands.

The liquid crystal which leaks from the panel is poisonous if it enters the eyes
or mouth.

If any part of the skin or body comes in direct contact with the panel, please
wash thoroughly. If some physical symptoms result, please consult your
doctor.

Follow local regulation or laws for safe disposal.

The backlight of the LCD panel contains mercury.

6 PRECAUTIONS

English

p

CAUTION

Handle with care when carrying the unit.

Disconnect the

ower cord and cables when moving the unit. Moving the unit
with the cord attached is dangerous. It may result in injury or equipment
damage.

When handling the unit, grip the bottom of the unit firmly with both
hands ensuring the panel faces outward before lifting.

Dropping the unit may result in injury or equipment damage.

Do not block the ventilation slots on the cabinet.

* Do not place books or any other papers on the ventilation slots.
* Do not install the unit in a closed space.
* Do not use the unit lying down or upside down.

Using the unit in these ways blocks the ventilation slots and prevents proper
airflow, leading to fire or other damage.

Do not touch the plug with wet hands.

Touching them may result in electric shock.

Use an easily accessible power outlet.

This will ensure that you can disconnect the power quickly in case of a
problem.

OK

Periodically clean the area around the plug.

Buildup of dust, water, or oil on the plug may result in fire.

Unplug the unit before cleaning it.

Cleaning the unit while it is plugged into a power outlet may result in electric
shock.

If you plan to leave the unit unused for an extended period, disconnect
the power cord from the wall socket after turning off the power switch
for the safety and the power conservation.

PRECAUTIONS

7

English

LCD Panel

The screen may have defective pixels. These pixels may appear as slightly light
or dark area on the screen. This is due to the characteristics of the panel itself,
and not the product.

The backlight of the LCD panel has a fixed life span. When the screen becomes
dark or begins to flicker, please contact your dealer.

Do not press on the panel or edge of the frame strongly, as this will result in
damage to the screen. There will be prints left on the screen if the pressed
image is dark or black. If pressure is repeatedly applied to the screen, it may
deteriorate or damage your LCD panel. Leave the screen white to decrease the
prints.

Do not scratch or press on the panel with any sharp objects, such as a pencil or
pen as this may result in damage to the panel. Do not attempt to brush with
tissues as this may scratch the LCD panel.

8 PRECAUTIONS

1. INTRODUCTION

Thank you very much for choosing an EIZO Color Monitor.

1-1. Features

• Dual inputs compliant

• DVI (p. 44) Digital input (TMDS (p. 45)) compliant

• Horizontal scanning frequency: 31 - 61 kHz (Digital input: 31 - 49 kHz)

Vertical scanning frequency: 50 - 85 Hz Vertical (1024 x 768 ~ 75 Hz)
Vertical (Digital) of 60 Hz (VGA text: 70 Hz)
Resolution: 1024 x 768

• Smoothing function incorporated for the adjustment of an enlarged image. (p.26)

• Auto Adjustment compliant and original “Picture Adjustment Program” software

included.

• ColorManagement function incorporated (p.28)

• Support to sRGB (p.45) standard

• USB (Universal Serial Bus) hub supported. (p.32)

• Ultra slim bezel incorporated

English

1-2. Package Contents

Please contact your local dealer for assistance if any of the listed items are missing or
damaged.

• LCD Monitor

• Power Cord

• Signal Cable (FD-C16)

• Signal Cable (FD-C04)

• 4 of M4 x 12 mm mounting screws

• EIZO LCD Utility Disk

• User’s Manual

• ScreenManager Quick Reference

• LIMITED WARRANTY

NOTE

• Please retain the packing materials for future transference.

1. INTRODUCTION

9

English

1-3. Controls & Connectors

Front

(2)

(1)

Control Panel

SIGNAL
1 - 2

(3)

(4)

ENTERAUTO

(5)

(6)

(7)

(8)

(1) ScreenManager
(2) Main Power Switch
(3) Input signal selection button
(4) Auto Adjustment Button
(5) Enter Button
(6) Control Buttons
(7) Power Button

*1

(8) Power Indicator

Green Operation
Yellow Power saving
Flashing yellow

(2 times for
each)

Flashing yellow
slowly

*1

Regarding the power indicator for the “Off Timer”, see page 19.

Power save mode Digital only

Power is off (Main power is on)

10 1. INTRODUCTION

English

Rear

(11)

(9)

Bottom

(10)

(12) (13)(14) (15)

*2

(9) Stand with cable holder (Detachable)
(10) Power Terminal Covers for the Optional peripheral

*3

(11) Security Lock Slot
(12) DVI-I Input Connector x 2 (SIGNAL 1, SIGNAL 2)
(13) USB Port (2 Downstream)
(14) USB Port (1 Upstream)
(15) Power Connector

*2

The LCD monitor can be used with an optional arm stand by removing the stand.

(see page 34)

*3

Allows for connection of a security cable. This lock supports Kensington’s

MicroSaver security system. For further information, please consult :
Kensington Technology Group
2855 Campus Drive, San Mateo, CA 94403 USA
Tel.: [phone], x3348, Intl: 650-572-2700, x3348
Fax: [phone]

http://www.kensington.com

1. INTRODUCTION

11

English

2. CABLE CONNECTION

2-1. Before connecting

Before connecting your monitor to the PC, change the display screen settings (resolution
p. 45) and frequency) in accordance with the charts below.

NOTE

• When your computer and display support VESA DDC, the suitable resolution and
the refresh rate are set by just plugging your display into the computer without any
manual settings.

Analog Input

Resolution Frequency Remarks

640 × 480
720 × 400
800 × 600
832 × 624

1024 × 768

~ 85 Hz VGA, VESA

70 Hz VGA TEXT

~ 85 Hz VESA

75 Hz Apple Macintosh

~ 75 Hz VESA

Digital Input

Only the following resolutions with frequency can be displayed on this model.

Resolution Frequency Remarks

640 × 480
720 × 400
800 × 600

1024 × 768

60 Hz VGA
70 Hz VGA TEXT
60 Hz VESA
60 Hz VESA

12 2. CABLE CONNECTION

2-2. Connecting the signal cable

NOTE

• Be sure that the power switches of both the PC and the monitor are OFF.

1. Plug the signal cable into the connector at the rear of the monitor

and the other end of the cable into the video connector on the PC.

After connecting, secure the connection with the screw-in fasteners.

English

Power Cord

Analog Input

Signal Cable Connector PC

Signal Cable (FD-C16
enclosed)

Signal Cable (FD-C16
enclosed) + Macintosh
Adapter (Optional)

Video Output
Connector D-Sub mini
15 pin

Video Output
Connector D-Sub 15
pin

• Standard graphics card

• Macintosh G3 (Blue &

White) / G4

• Macintosh

Macintosh Adapter (Optional)

Digital Input

Signal Cable Connector PC

Signal Cable (FD-C04
enclosed)

NOTE

• The monitor is not compatible with a Power Macintosh G4/G4 Cube ADC
(Apple Display Connector)

Video Output
Connector DVI-I

Digital graphics board

2. Plug the power cord into the power connector on the rear of the

monitor.

2. CABLE CONNECTION

13

English

3. Lead the power cord and signal cable into the cable holder at rear of

the monitor.

Cable Holder

4. Plug the other end of the power cord into a power outlet.

WARNING

Use the enclosed power cord and connect to the standard
power outlet of your country.

Be sure to remain within the rated voltage of the power cord.
Not doing so may cause in fire or electric shock.

The equipment must be connected to a grounded main
outlet.

Not doing so may cause in fire or electric shock. Not doing so
may cause in fire or electric shock.

5. Turn on the monitor's main power and then switch on the PC's

power.

The monitor’s power indicator will light up (green).
If an image does not appear, refer to the “TROUBLE SHOOTING” (p.36) for

advice.
Whenever finished, turn off the PC and the monitor.

NOTE

• When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or
Digital) is displayed for a few seconds on the right top corner of the screen.

• Adjust brightness of the screen depending on the brightness of your environment.

• Be sure to take adequate rests. A 10-minute rest period each hour is suggested.

14 2. CABLE CONNECTION

2-3. Connecting two PCs to the monitor

Two PCs can be connected to the monitor through the Signal 1 and the Signal 2 on the
back of the monitor.

Connecting Examples

Signal 1 Signal 2

English

PC 1

(Ex.1) Analog D-Sub

mini 15
pin

(Ex.2) Analog D-Sub

mini 15
pin

(Ex.3) Digital DVI

Signal Cable
(FD-C16 enclosed)

Signal Cable
(FD-C16 enclosed)

Signal Cable
(FD-C04 enclosed)

Signal Cable
(FD-C04 enclosed)

Signal Cable
(FD-C16 optional)

Signal Cable
(FD-C04 optional)

PC 2

DVI

D-Sub
mini
15 pin

DVI

Digital

Analog

Digital

2. CABLE CONNECTION

15

English

Selecting the active input

The Input signal selection button on the front panel can be used to select either Signal 1
or Signal 2 as the active input at any time. Every time the button is pressed, the input
changes. When switching the signal, the kind of the input signal (Signal1 or 2/Analog or
Digital) is displayed for a few seconds on the right top corner of the screen.

Input signal selection button

SIGNAL
1 - 2

AUTO

ENTER

The priority input signal

This function is used to select which PC will have priority to control the monitor when
utilizing two PCs. The monitor constantly checks the input signals and switches
automatically in accordance with the “Input Priority” setting (see table below). Once a
priority is set, whenever a change of signal is detected at the selected input, the monitor
will switch the input to that signal.

In the case of only one signal being present at either input, the monitor automatically
detects and displays that signal.

Priority

setting

Signal 1

Signal 2

Manual

If signals from both inputs are present, the monitor gives preference to
Signal 1 in the following cases.

• When the power of the monitor is turned ON

• When the signal input to Signal 1 is changed even if active input was Signal

2.

If signals from both inputs are present, the monitor gives preference to
Signal 2 in the following cases.

• When the power of the monitor is turned ON

• When the signal input to Signal 2 is changed even if active input was Signal

1.

The monitor will not detect signals automatically in this mode. Select the
active input by pressing the input signal selection button on the monitor’s
front panel.

Performance

NOTE

• When the Signal 1 or Signal 2 is selected, the power saving mode of the monitor
activates only if both PCs are in power saving mode.

16 2. CABLE CONNECTION