EIZO FlexScan EasyPIX User Guide

quip

Thank you very much for choosing an EIZO product.
Please read this User’s Manual carefully to familiarize yourself with safe and effective usage procedures.
Please retain this manual for future reference.

PRECAUTIONS

WARNING

 If the unit begins to emit smoke, smells like something is burning, or makes

strange noises, disconnect all connections immediately and contact your dealer
for advice.

Attempting to use a malfunctioning unit may result in fire, electric shock, or e
damage.

 Do not disassemble or modify the unit and cable.

Not doing so may result in damage, fire or electric shock.

Package Contents

Please contact your local dealer for assistance if any of the listed items are missing or damaged.

 EIZO EasyPIX

 EX1 (Sensor)

 EIZO EasyPIX Software CD-ROM

 User’s Manual (This manual)

EIZO EasyPIX is a trademark of EIZO NANAO CORPORATION.
EIZO is registered trademark of EIZO NANAO CORPORATION in Japan and other countries.

________________________________

 EIZO EasyPIX Software User’s Manual

ment

Installing the software

Before connecting the EX1, it is required to install the EIZO EasyPIX Software in advance.
For further details, refer to the EIZO EasyPIX Software User’s Manual.

How to attach the EX1

NOTE

 Before attaching the EX1, remove the stains or dusts on the surface of the monitor.

_____________________________

_____________________________

(1) Connect the upstream port of monitor and the USB downstream port of PC with the EIZO USB

Cable (MD-C93) supplied with your monitor.

(2) Connect the EX1 to the USB downstream port of the PC.
(3) Hook the cable of EX1 to the position to measure on the monitor.
(4) If the EX1 is unstable, slide the cable weight slowly to achieve

appropriate balance.

Cable Weight

Specifications

Interface USB
Enviromental
Specifications

Power Supply
Mass Approx. 120 g (0.26 lbs.)
Dimensions 93mm (W) x 99mm (H) x 33mm (D)

Certifications and Standards CE, FCC-A

NOTE

 Storing or using the sensor at a temperature of under 30°C and a humidity of under 70% is recommended,

or it may affect the accuracy of the measurement. Avoid storing or using the sensor where it may be
exposed to direct sunlight.

Temperature

Humidity Operation: 30 - 80 % R.H. Non-condensing

____________________________________

Operation: 15 - 35 °C
Storage: -10 - 60 °C

Storage: 30 - 80 % R.H. Non-condensing

5.0 ± 0.25V 100mA

(3.66”(W) x 3.9”(H) x 1.3”(D))

Rear of Cable Weight

Slide Slowly

■Dimensions

Unit: mm (inch)