Einhell TE-CD 18/44 Li-i User guide
GB Original operating instructions
Cordless Impact Drill
TE-CD 18/44 Li-i
7
Art.-Nr.: 45.137.96 (1x1,5 Ah) I.-Nr.: 21010
Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb 1Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb 1 18.05.2021 10:38:4318.05.2021 10:38:43
- 2 -
Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb 2Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb 2 18.05.2021 10:38:4518.05.2021 10:38:45
1
9
6
1 7
4
2
8
11
3
10
5
2 3
6
1.
5
8
5
2.
- 3 -
Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb 3Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb 3 18.05.2021 10:38:4518.05.2021 10:38:45
4 5
1
11
1
7
2
6 7
10
3
4
9
a
a
2
- 4 -
Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb 4Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb 4 18.05.2021 10:38:4618.05.2021 10:38:46
GB
Table of contents
1. Safety regulations
2. Layout and items supplied
3. Proper use
4. Technical data
5. Before starting the equipment
6. Operation
7. Cleaning, maintenance and ordering of spare parts
8. Disposal and recycling
9. Storage
10. Charger indicator
- 5 -
Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb 5Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb 5 18.05.2021 10:38:4818.05.2021 10:38:48
GB
Danger! - Read the operating instructions to reduce the risk of inquiry
Caution! Wear ear-muff s. The impact of noise can cause damage to hearing.
Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on
wood and other materials. Never use the device to work on any materials containing asbestos!
Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted
by the device can cause loss of sight.
Change the gear only when the drill is at a standstill. If you fail to observe this point, the gearing may be
damaged.
Store the battery only in dry rooms with an ambient temperature of +10°C to +20°C. Place only charged
batteries in storage (charged at least 40%).
Safety class II
For use in dry rooms only.
- 6 -
Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb 6Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb 6 18.05.2021 10:38:4818.05.2021 10:38:48
GB
Danger!
When using the equipment, a few safety precautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the information is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be
found in the enclosed booklet.
Warning!
Read all the safety information, instructions,
illustrations and technical data provided on
or with this power tool. Failure to adhere to the
following instructions may result in electric shock,
fi re and/or serious injury.
Keep all the safety information and instructions in a safe place for future use.
2. Layout and items supplied
2.1 Layout (Fig. 1)
1. Torque selector
2. Battery capacity indicator
3. Changeover switch
4. ON/OFF switch
5. Battery pack
6. Battery charger
7. Selector switch for 1st/2nd gear
8. Pushlock button
9. Quick-change drill chuck
10. LED lamp
11. Selector switch for driving/drilling/impact drilling
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
Open the packaging and take out the equip-
•
ment with care.
Remove the packaging material and any
•
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
•
transport damage.
If possible, please keep the packaging until
•
the end of the guarantee period.
Important!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
Cordless drill/screwdriver
•
Battery charger
•
Battery
•
Original operating instructions
•
Safety instructions
•
3. Proper use
The cordless impact drill/driver is designed for
tightening and undoing screws, for drilling in
wood, metal and plastic, and for impact drilling in
stone, in each case when using the appropriate
bits.
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
- 7 -
Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb 7Anl_TE_CD_18_44_Li_i_Kit_SPK7.indb 7 18.05.2021 10:38:4818.05.2021 10:38:48
Loading...