EIKI LC-XB100A, LC-XB200A User Manual

Page 1
Multimedia Projector
MODEL
Network Supported
Wired LAN
Refer to the Owner's Manuals below for
details about network function.
Network Set-up and Operation
PJ Network Manager
Owner's Manual
Page 2

Features and Design

This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
Compact Design
This projector is designed compact in size and weight.
It is easy to carry and installed anywhere you wish to use.
Simple Computer System Setting
The projector has the Multi-scan system to conform to
almost all computer output signals quickly (p.31). Up to WUXGA resolution can be accepted.
Useful Functions for Presentations
- The digital zoom function allows you to focus on the crucial information during a presentation (p.38).
- Blackboards* can be used as a projection screen. *The board color is limited to Green (pp.35, 42).
Lamp Control
Brightness of the projection lamp can be selected
(pp.27, 54).
Quick Termination
The AC power cord can be unplugged immediately
after turning off the projector without waiting for the termination of the cooling fan rotation (p.22).
Logo Function
The Logo function allows you to customize the screen
logo (pp.49-51). You can capture an image for the screen logo and use it for the starting-up display or between presentations.
Multilanguage Menu Display
Operation menu is available in 17 languages; English,
German, French, Italian, Spanish, Portuguese, Dutch, Sw edish, Finnish , Polish , Hungar ian, Roma nian, Russian, Chinese, Korean, Japanese and Thai (p.46).
Security Function
The Security function helps you to ensure security
of the projector. With the Key lock function, you can lock the operation on the top control or remote control (p.56). PIN code lock function prevents unauthorized use of the projector (pp.21, 56–57).
Helpful Maintenance Functions
Lamp and filter maintenance functions provide for
better and proper maintenance of the projector.
LAN Network Function
This projector is loaded with the Wired LAN network
function. You can operate and manage the projector via network. For details, refer to the owner’s manual “Network Set-up and Operation.”
Auto Setup Function
This function enables Input search, Auto Keystone
correction and Auto PC adjustment by simple pressing the AUTO SETUP button on the top control (p.47).
Colorboard Function
At the time of simple projection on the colored wall,
you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors.
Power Management
Th e Power ma nagem ent func tion red uces po wer
consumption and maintains the lamp life (p.53).
Closed Caption
Closed Caption is a function that displays the audio
portion of a TV program as text on the screen. The closed captioning service is available mainly in the U.S. (p.52)
Note:
• The On-Screen Menu and figures in this manual may differ slightly from the product.
• The contents of this manual are subject to change without notice.
2
Page 3

Table of Contents

Features and Design . . . . . . . . . . . . . . . . . . .2
Table of Contents . . . . . . . . . . . . . . . . . . . . . .3
To the Owner . . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions . . . . . . . . . . . . . . . . . . . . .5
Air Circulation 6
Installing the Projector in Proper Position 6
Moving the Projector 6
Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Part Names and Functions . . . . . . . . . . . . . .8
Front 8
Back 8
Bottom 8
Rear Terminal 9
Top Control 10
Remote Control 11
Remote Control Battery Installation 12
Remote Control Operating Range 12
Remote Control Code 12
Laser Pointer Function 13
Pointer Function 13
How to use the USB Infrared Receiver 14
Wireless Mouse Operation 14
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . .15
Positioning the Projector 15
Adjustable Feet 15
Connecting to a Computer 16
Connecting to Video Equipment 17
Connecting to Component Video Equipment 18
Connecting the AC Power Cord 19
Basic Operation . . . . . . . . . . . . . . . . . . . . . .20
Turning On the Projector 20
Turning Off the Projector 22
How to Operate the On-Screen Menu 23
Menu Bar 24
Zoom and Focus Adjustment 25
Auto Setup Function 25
Keystone Correction 25
Sound Adjustment 26
Remote Control Operation 27
Input Source Selection (RGB(PC digital),
RGB(AV HDCP)) 30
Computer System Selection 31
Auto PC Adjustment 32
Manual PC Adjustment 33
Image Mode Selection 35
Image Adjustment 36
Screen Size Adjustment 37
Video Input . . . . . . . . . . . . . . . . . . . . . . . . . .39
Input Source Selection (Video, S-video) 39
Input Source Selection (Component, RGB
Scart 21-pin) 40
Video System Selection 41
Image Mode Selection 42
Image Adjustment 43
Screen Size Adjustment 45
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Setting 46
Information . . . . . . . . . . . . . . . . . . . . . . . . . .60
Input Source Information Display 60
Maintenance and Cleaning . . . . . . . . . . . . .61
WARNING indicator 61
Cleaning the Filters 62
Resetting the Filter Counter 62
Attaching the Lens Cap 63
Cleaning the Projection Lens 63
Cleaning the Projector Cabinet 63
Lamp Replacement 64
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Troubleshooting 66
Menu Tree 70
Indicators and Projector Condition 72
Compatible Computer Specifications 73
Technical Specifications 75
Optional Parts 76
PJ Link Notice 77
Configurations of Terminals 78
PIN Code Number Memo 79
Dimensions 80
Computer Input . . . . . . . . . . . . . . . . . . . . . .29
Input Source Selection (RGB: Computer 1/
Computer 2(Analog)) 29
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation.
3
Page 4

To the Owner

0.7’(20cm)
1.5’(50cm) 3’(1m) 3’(1m)
Before installing and operating this projector, read this manual thoroughly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in good condition for many years to come. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Troubleshooting” section in the back of this booklet. If the problem still persists, contact the dealer where you purchased the projector or the service center.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Precaution
WARNING: THIS APPARATUS MUST BE EARTHED.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
– This projector produces intense light from the projection lens. Do not stare directly into the lens, otherwise eye damage could result. Be especially careful that children do not stare directly into the beam. – Install the projector in a proper position. Otherwise it may result in fire hazard. – Allowing the proper amount of space on the top, sides, and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The dimension shown here indicate the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained. – Do not cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous.
SIDE and TOP REAR
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.
FOR EU USERS
The symbol mark and recycling systems described below apply to EU countries and do not apply to countries in other areas of the world.
Your product is designed and manufactured with high quality materials and components which can be recycled and/or reused.
Th e symb ol mar k mean s that elec t rica l and elect ronic equipment, batteries and accumulators, at their end-of-life, should be disposed of separately from your household waste.
Note:
If a chemical symbol is printed beneath the symbol mark, this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead
In the European Union there are separate collection systems for used electrical and electronic equipment, batteries and accumulators.
Please, dispose of them correctly at your local community waste collection/recycling centre.
Please, help us to conserve the environment we live in!
– If the projector is unused for an extended time, unplug the projector from the power outlet. –Do not project the same image for a long time. The afterimage may remain on the LCD panels by the characteristic of panel.
CAUTION
DO NOT SET THE PROJECTOR IN GREASY, WET, OR SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT A BREAKDOWN OR A DISASTER. IF THE PROJECTOR COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY BECOME DETERIORATED.
CAUTION
Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.
4
Page 5

Safety Instructions

All the safety and operating instructions should be read before the product is operated.
Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Fo llow all wa rning s and ins tructi ons mark ed on the projector.
For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.
Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming pool, etc...
Do not use att a c h m e nt s not recommend e d by th e manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Us e on ly with a car t or stand recom m ended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer’s instructions, an d sho uld us e a mou n ti n g kit ap pro ved by the manufacturers.
An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
Slots and openings in the back and bottom of the cabinet are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating.
Do not install the projector near the ventilation duct of air-conditioning equipment.
This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.
Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening or re m o v i n g Covers ma y expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Unplug this projector from wall outlet and refer servicing to qualified serv ice pers onnel under the follow ing conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following
the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has
been damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts ar e required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons.
The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.
This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector.
Up o n completi on of any serv ice or rep a irs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.
NOTE FOR CUSTOMERS IN THE US
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.
5
Page 6
Safety Instructions
20°
20°
30°

Air Circulation

Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.
CAUTION
Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. – Do not put any flammable object or spray can near the
projector, hot air is exhausted from the air vents.
– Keep the exhaust vent at least 3’ (1 m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic parts. These areas will become hot while the projector is being used.
– Do not put anything on the cabinet. Objects put on the
cabinet will not only get damaged but also may cause fire hazard by heat.
Cooling fans are provided to cool down the projector. The fans’ running speed is changed according to the temperature inside the projector.

Installing the Projector in Proper Position

Install the projector properly. Improper Installation may reduce the lamp life and cause a fire hazard.
Do not tilt the projector more than 20 degrees from side to side.
Do not tilt the projector more than 30 degrees from above and below.
Do not point the projector up to project an image.
Do not point the projector down to project an image.
Do not put the projector on either side to project an image.

Moving the Projector

When moving the projector, replace the lens cap and retract adjustable feet to prevent damage to the lens and cabinet. When the projector is not in use for an extended period, put it into the supplied carrying case with the lens side up.
Exhaust Vent (Hot air exhaust)
Exhaust Vent (Hot air exhaust)
Air Intake Vent
Air Intake Vent
Air Intake Vent
CAUTION
The carrying case (supplied) is intended for protection against dust and scratches on surface of the cabinet, and it is not designed to protect an appliance from external forces. Do not transport the projector by courier or any other transport service with this case, otherwise the projector can be damaged. When handling the projector, do not drop, bump, subject it to strong forces, or put other things on the cabinet.
CAUTION IN CARRYING OR TRANSPORTING
THE PROJECTOR
– Do not drop or bump the projector, otherwise damages
or malfunctions may result. – When carrying the projector, use a suitable carrying case. – Do not transport the projector by courier or any other
transport service in an unsuitable transport case. This
may cause damage to the projector. For information
about transporting the projector by courier or any other
transport service, consult your dealer. – Do not put the projector in a case before the projector is
cooled enough.
6
Page 7

Compliance

GROUND
ASA
Federal Communications Commission Notice
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number : LC-XB100A, LC-XB200A Trade Name : EIKI Responsible party : EIKI International, Inc. Address : 30251 Esperanza Rancho Santa Margarita CA 92688-2132 Telephone No . : 800-242-3454 (949-457-0200)
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord use d in the United St ates an d Can ada is listed by the Underwrite rs Laboratories (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.
AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted.
WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET OUTLET.
The Wires in this mains lead are coloured in accordance with the following code: Green-and-yellow Earth
Blue . . . . . . . . . . . Neutral
Brown . . . . . . . . . Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow. The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
WARNING: THIS APPARATUS MUST BE EARTHED.
. If the fuse cover is detachable, never use the plug with the cover omitted. If a
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
7
Page 8

Part Names and Functions

Front

Back

Infrared Remote ReceiverZoom RingFocus RingProjection Lens Lens Cap
(See page 63 for attaching.)
CAUTION
Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens cap and result in fire hazard.
Speaker
*
⑪⑬⑫
Exhaust Vents
CAUTION
Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.
Lamp CoverAir Intake VentTerminals and ConnectorsTop Controls and IndicatorsLAN Connection TerminalPower Cord ConnectorFiltersAdjustable Feet

Bottom

Note:
LAN Connection Terminal is for the Network function.
Refer to the owner’s manual of “Network Set-up and Operation” .
* Kensington Security Slot
This slot is for a Kensington lock used to deter theft of the projector.
*Kensington is a registered trademark of ACCO Brands
Corporation.
8
Page 9

Rear Terminal

Part Names and Functions
CONTROL PORT
When controlling the projector with RS-232C,
connect the control equipment to this connector with the serial control cable
COMPUTER IN 1 / COMPONENT IN
Connect output signal from a computer, RGB scart
21-pin video output or component video output to this terminal (pp.16,18).
MONITOR OUT
This terminal can be used to output the incoming
analog RGB signal and component signal from COMPUTER IN 2 / DVI-I terminal or COMPUTER IN 1/COMPONENT IN terminal to the other monitor (pp.16,18).
COMPUTER IN 2 / DVI-I
Connect computer output (Digital/Analog DVI-I type)
to this terminal (pp.16,18).
LAN Connection Terminal
Connect the LAN cable (refer to the owner’s manual
“Network Set-up and Operation”).
.
AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this jack
(pp.16-18).
This terminal outputs sound from AUDIO IN
terminal ( or ).
COMPUTER 1 / COMPUTER 2 AUDIO IN
Connect the audio output (stereo) from a
computer or video equipment connected to or to this jack. (16, 18)
AUDIO IN
Connect the audio output signal from video
equipment connected to or to this jack.
For a mono audio signal (a single audio jack), connect it to the L (MONO) jack (p.17).
VIDEO IN
Connect the composite video output signal to
this jack (p.17).
S-VIDEO IN
Connect the S-VIDEO output signal from video
equipment to this jack (p.17).
9
Page 10
Part Names and Functions

Top Control

SELECT button
– Execute the selected item (p.23). – Expand or compress the image in the Digital zoom
mode (p.38).
AUTO SETUP button
Execute the setting of Auto setup (includes InputExecute the setting of Auto setup (includes Input
search, Auto PC adj. and Auto Keystone functions) in the setting menu. (pp.25, 47). (pp.25, 47).
POINT
– Select an item or adjust the value in the On-Screen
– Pan the image in the Digital zoom +/- mode (p.38). – Adjust the volume level (Point
INPUT button
Select an input source (pp.29-30, 39-40).
ON/STAND–BY button
Turn the projector on or off (pp.20-22).
POWER indicator
– Lights red when the projector is in stand-by mode. – Lights green during operations. – Blinks green in the Power management mode
MENU button
Open or close the On-Screen Menu (p.23).
ed 7 8
Menu (p.23).
(pp.53, 72).
(VOLUME +/–) buttons
buttons) (p.26).
7 8
WARNING indicator
– Lights red when the projector detects an abnormal
condition.
– Blinks red when the internal temperature of the
projector exceeds the operating range (pp.61, 72).
LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.64, 72).
10
Page 11
Part Names and Functions

Remote Control

⑦ ⑧
⑪ ⑫
Note:
To ensure safe operation, please observe the following precautions:
– Do not bend, drop, or expose the remote
control to moisture or heat.
– For cleaning, use a soft dry cloth. Do not
apply benzene, thinner, spray, or any chemical material.
L-CLICK button
Act as the left mouse button for wireless mouse operation. (p.14)
ON/STAND-BY button Turn the projector on or off. (pp.20-22)
SIGNAL EMISSION indicator Lights red while the laser beam is being emitted from the laser light window or a
signal is being sent from the remote control to the projector.
LASER LIGHT window
A laser beam is emitted from here (p.12).
VIDEO button
Select the VIDEO input source. (p.39)
COMPUTER button
Select the COMPUTER input source. (pp.29-30,40)
INFO. button
Operate the information function. (p.60)
KEYSTONE button
Correct keystone distortion. (pp.25, 48) Point ed 7 8 ( VOLUME
–Select an item or adjust the value in the On-Screen Menu. (p.23) –Pan the image in the Digital zoom +/- mode. (p.38) –Adjust the volume level. (Point 7 8 buttons) (p.26)
MENU button
Open or close the On-Screen Menu. (p.23)
FREEZE button
Freeze the picture on the screen. (p.27) LASER button
– Operate the Laser pointer function. Laser beam is emitted while pressing this
button within 1 minute. When using this laser pointer for more than 1 minute, release the LASER button and press it again. (p.12)
– Display the Pointer on the screen. (p.12) PAGE ed buttons
Scroll back and forth the pages on the screen when giving a presentation. To use these buttons, connect the USB infrared receiver to the USB port of your computer. (pp.9, 14)
LAMP button
Select a lamp mode. (pp.27, 54)
D.ZOOM ed buttons Zoom in and out the images. (pp.27, 38)
RESET/ON/ALL-OFF switch
When using the remote control, set this switch to “ON.” Set it to “ALL OFF” for
power saving when it is not used. Slide this switch to "RESET" to initialize the remote control code or switch Spotlight and Pointer to the Laser pointer function. (pp.12-13)
SCREEN button
Select a screen mode. (pp.28,37-38,45)
IMAGE button
Select the image mode. (pp.28,35,42)
MUTE button
Mute the sound. (p.26)
P-TIMER button
Operate the P-timer function. (p.28)
NO SHOW button
Temporarily turn off the image on the screen. (p.28)
R-CLICK button
Act as the right mouse button for wireless mouse operation. (p.14) SELECT button
– Execute the selected item. (p.23) – Expand or compress the image in Digital zoom mode. (p.38)
PRESENTATION POINTER button Move a pointer of the projector or a pointer for wireless mouse operation. (pp.12-13)
AUTO SET button
Correct vertical keystone distortion and adjust the PC display parameters. (pp.25, 47)
+ / –
)
buttons
11
Page 12
Part Names and Functions

Remote Control Battery Installation

Open the battery
1 2 3
compartment lid.
Install new batteries into the compartment.
Replace the compartment lid.
Press the lid downward and slide it.
To ensure safe operation, please observe the following precautions :
Use two (2) AAA or LR03 type alkaline batteries.
Always replace batteries in sets.
Do not use a new battery with a used battery.
Avoid contact with water or liquid.
Do not expose the remote control to moisture or heat.
Do not drop the remote control.
If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.
Risk of an explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions or your local disposal rule or guidelines.

Remote Control Operating Range

Point the remote control toward the projector (Infrared Remote Receiver) when pressing the buttons. Maximum operating range for the remote control is about 16.4'(5 m) and 60 degrees in front of the projector.
Two AAA size batteries
For correct polarity (+ and –), be sure battery terminals are in contact with pins in compartment.
30°
30°
Remote control
16.4' (5 m)

Remote Control Code

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See "Remote control" in the Setting Menu on page 55.
While pressing the MENU button, press the IMAGE
1
button number of times corresponding to the remote control code. See the list below.
To initialize the remote control code, slide the RESET/
2
ON/ALL-OFF switch to RESET, and then to ON. The initial code is set to Code 1.
Remote Control Code
Code 1 1
Code 2
Code 3 3
Code 4 4
Code 5 5
Code 6 6
Code 7 7
Code 8 8
Number of Times
Pressing IMAGE
Button
2
While pressing the MENU button, press the IM AGE butt o n number o f ti mes corresponding to the remote control code.
MENU button
IMAGE button
RESET/ON/ALL­OFF switch
12
Page 13
Part Names and Functions

Laser Pointer Function

This remote control emits a laser beam from the laser light window. Press the LASER button to activate the laser pointer. The signal emission indicator lights red and the red laser beam is emitted. If the LASER button is pressed for more than one minute or if it is released, the laser light goes off. The laser emitted is a Class II laser. Do not look into the laser light window or point the laser beam at yourself or other people. The following is the caution label for the laser beam. CAUTION: Use of controls, adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure. Never look directly into the laser light window while a laser is emitted, otherwise eye damage may result.
The caution label is put on the remote control.
Signal Emission Indicator
Laser Light Window

Pointer Function

You can move the Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image.
Press and hold the MENU and NO SHOW buttons for
1
more than 5 seconds to activate the Pointer function. (The Laser pointer has switched to the Pointer function.)
Press the LASER button on the remote control pointing
2
to ward the projecto r. The Spotlight or Point er is displayed on the screen with the LASER button lighting green. Then move the Spotlight or Pointer with the PRESENTATION POINTER button. If the LASER button does not light green and continues to emit a laser beam, try the abovementioned procedure until the LASER button lights green.
To clear the Spotlight or Pointer out the screen, press
3
the LASER button pointing toward the projector and see if the LASER button lighting is turned off. To switch to the Laser pointer again, press and hold the NO SHOW and MENU buttons for more than 5 seconds or slide the RESET/ON/ALL-OFF switch to RESET and then to ON. When you reset the Pointer function, the remote control code will be reset, as well.
Spotlight
Pointer
PRESENTATION POINTER button
MENU button NO SHOW button Press and hold the MENU
and NO SHOW buttons for more than 5 seconds.
PRESENTATION POINTER button
LASER button After the Laser pointer has
switched to the Pointer, use the LASER button as the Pointer function ON-OFF switch. Press the LASER button pointing toward the projector and see if it lights green.
Note:
You can choose the size of Spotlight (Large/Middle/
Small) and the pattern of Pointer (Arrow/Finger/Dot) in the Setting Menu. See “Pointer” on page 55.
13
Page 14
Part Names and Functions
30°
30°
VGA cable
Remote Control
16.4’(5 m)
USB Infrared Receiver
USB Infrared Receiver

How to use the USB Infrared Receiver

The wireless mouse function is available when the USB infrared receiver is connected to the USB port of your computer.
Connect the computer's monitor output
1
terminal to the projector's input terminal with the VGA cable.
Connect the USB Infrared Receiver to theUSB Infrared Receiver to the to the
2
USB port of your computer.
Note:
• Some computer settings may have to be changed in order for the mouse function to be used. Refer to your computer's owner's manual for details.
• The USB infrared receiver is effective regardless of the remote control code.

Wireless Mouse Operation

The remote control can be used as a wireless mouse for your computer.
Before operating the wireless mouse, connect the USB infrared receiver to the USB port of your computer.
PRESENTATION POINTER button
Move the pointer on the screen with this button.
R-CLICK button
Act as right (click) mouse button.
PAGE ed buttons
Scroll back and forth the pages on the screen when giving a presentation.
L-CLICK button
Act as left (click) mouse button.
14
Page 15

Installation

7.8’(2.39m)
12.7’(3.88m)
11.8’(3.6m)
19.1’(5.83m)
15.8’(4.81m)
---
23.7’(7.23m)
---
2.3’(0.69m)
7.8’(2.39m)
11.8’(3.6m)
15.8’(4.81m)
23.7’(7.23m)
A
B
30"
62"
93"
124"
186"
2.3’(0.69m)
3.7’(1.14m)
30"

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen.
Note:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.

Adjustable Feet

Projection angle can be adjusted up to 12.0 degrees with the adjustable feet.
Lift the front of the projector and press the feet lock latches on both side of the projector.
Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to a proper height and tilt.
Keystone distortion can be adjusted automatically with the Auto setup function or manually by using the remote control or the menu operation (see pages 25, 47-48).
Adjustable Feet
Feet Lock Latches
15
Page 16
Installation

Connecting to a Computer

Cables used for connection
• VGA Cable (Mini D-sub 15 pin) *
• DVI-VGA Cable
• DVI Cable
• Audio Cables (*One cable is supplied; other cables are not supplied with the projector.)
Audio Output
Audio cable (stereo)
Monitor
Output
VGA cable
COMPUTER IN 1
COMPUTER 1/ COMPUTER 2 AUDIO IN
Monitor Input
VGA cable
MONITOR OUT
Monitor Output
DVI cable
DVI
-VGA cable
COMPUTER IN 2/ DVI-I
External Audio Equipment
Audio Input
Audio cable (stereo)
AUDIO OUT (stereo)
Note:
• Input sound to the COMPUTER1 /COMPUTER 2 AUDIO IN terminals when using the COMPUTER IN 1/ COMPONENT IN
and the COMPUTER IN 2/DVI-Iterminals as input.
• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
• When input RGB(PC digital) source to the MONITOR OUT terminal, the MONITOR OUT terminal is not available.
16
Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.
Page 17

Connecting to Video Equipment

Cables used for connection
• Video and Audio Cable (RCA x 3)
• S-Video Cable
• Audio Cable (Cables are not supplied with the projector. )
Video and Audio Output
(Video)
(L)
(R)
Installation
External Audio Equipment
Audio Input
S-Video Output
Video and audio cable
VIDEO
AUDIO IN
Audio cable (stereo)
AUDIO OUT (stereo)
S-Video cable
S-VIDEO
Note:
When the AUDIO OUT is plugged-in, the projector's built-
in speaker is not available.
Un plug the pow er cords of both the projector and external equipment from the AC outlet before connecting cables.
17
Page 18
Installation

Connecting to Component Video Equipment

Cables used for connection
• Audio Cables
• Scart-VGA Cable
• VGA Cable
• Component Cable
• Component-VGA Cable (Cables are not supplied with this projector.)
RGB Scart 21-
pin Output
Scart-VGA cable
COMPUTER IN 1/ COMPONENT IN
Component Video Output
(Y, Pb/Cb, Pr/Cr)
Component cable
Component­VGA cable
Monitor Input
VGA cable
MONITOR OUTPUT
Audio Output
Audio cable (stereo)
COMPUTER 1 /AUDIO IN
External Audio Equipment
Audio Input
Audio cable (stereo)
Note:
• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
• See page 76 for ordering optional cables.
18
AUDIO OUT (stereo)
Unp lug the powe r c ords of both the projector and external equipment from the AC outlet before connecting cables.
Page 19

Connecting the AC Power Cord

This projector uses nominal input voltages of 100-120 V or 200–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning the projector on.
CAUTION
The AC outlet must be near this equipment and must be easily accessible.
Note:
Unplug the AC power cord when the projector is not in use. When this projector is connected to an outlet with the AC power cord, it is in Stand-by mode and consumes a little electric power.
Installation
Connect the AC power cord (supplied) to the projector.
NOTE ON THE POWER CORD
AC power cord must meet requirement of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side
To power cord connector on your projector.
For the U.S.A. and Canada
Ground
To the AC outlet.
(120 V AC)
AC outlet side
To the AC outlet.
(200 - 240 V AC)
For the U.K.For Continental Europe
To the AC outlet.
(200 - 240 V AC)
19
Page 20

Basic Operation

Project Video
Project Computer
Cancel
Project Video
Project Computer
Cancel

Turning On the Projector

Complete peripheral connections (with a computer,
1
VCR, etc.) before turning on the projector.
Connect the projector’s AC power cord into an AC
2
outlet. The POWER indicator lights red. Open the lens cap (see pages 8, 63).
Press the ON/SYAND-BY button on the top control
3
or on the remote control. The POWER indicator lights green and the cooling fans start to operate. The preparation display appears on the screen and the countdown starts.
After the countdown, the input source that was selected
4
the last time and the lamp control status icon (see page
54) appear on the screen.
If there is no signal input when start on the projector,
5
or the current signal is missed while operating the projector, the Video/PC selection window will be displayed on the screen, please move the pointer to input source desired by pressing the Point ed buttons and press the SELECT button. And then follow the input signal guidance window to correct the signal and connection.
16
http://www.eiki.com
The preparation display will disappear after 30 seconds.
Selected Input Source and Lamp Control
Video
Lamp control status
(See page 54 for Lamp control status.)
Note:
The Filter warning and Lamp replacement
icons may appear on the screen depending on the usage state of the projector.
Video / PC selection window
If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on the next page.
Note:
• When the Logo select function is set to Off, the logo will not be shown on the screen (p.49).
• When Countdown off or Off is selected in the Display function, the countdown will not be shown on the screen (p.48).
• When the Input Search function is set to On2, the input signal will be searched automatically (p.47).
• When Off is selected in the Display function, the Video/ PC selection window and the input signal guidance window are not shown on the screen. (p.48)
Input signal guidance window
No signal
Current Input setting:Video
Is signal proce ssed correctl y? Is cabl e conn ec ted pr ope rl y?
Video / PC selection window
Input signal guidance window
No signal
Current Input setting:RGB
Is signal proce ssed correctl y?
Is cabl e conn ec ted pr ope rl y?
20
Page 21
Enter a PIN code
Use the Point ed buttons to enter a number. Press the Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to “”. If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.
Basic Operation
PIN Code Input Dialog Box
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector.
If you entered an incorrect PIN code, PIN code and the number (✳✳✳✳) will turn red for a moment. Enter the correct PIN code all over again.
What is PIN code?
PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector.
A PIN code consists of a four-digit number. Refer to the PIN code lock function in the Setting Menu on pages 56-57 for locking operation of the projector with your PIN code.
Note:
• If the PIN code number is not entered within three minutes after the PIN code dialog box appeared, the projector will be turned off automatically.
• The “1234” is set as the initial PIN code at the factory.
After the OK icon disappears, you can operate the projector.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no longer be started. Take a special care in setting a new PIN code; write down the number in a column on page 79 of this manual and keep it on hand. Should the PIN code be missing or forgotten, consult your dealer or service center.
21
Page 22
Basic Operation

Turning Off the Projector

Press the ON/STAND-BY button on the top control or
1
on the remote control, and Power off? appears on the screen.
Press the ON/STAND-BY button again to turn off the
2
projector. The POWER indicator starts to blink red, and the cooling fans keep running. (You can select the level of fans’ quietness and speed. See “Fan” on page 58.) At this time, you can unplug the AC power cord even if the fans are still running.
When the projector has cooled down enough, the
3
POWER indicator stops blinking and you can turn on the projector.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST FIVE MINUTES BEFORE TURNING IT OFF.
Power off? disappears after 4 seconds.
DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN HOUR IN EVERY 24 HOURS.
Note:
• When the On start function is set to On, the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.53).
• The running speed of cooling fans is changed according to the temperature inside the projector.
• Do not put the projector in a case before the projector is cooled enough.
• If the WARNING indicator blinks or lights red, see “WARNING indicator” on page 61.
• While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.
• The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.
• The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal power-off processing for fan
cooling is completed, compared with the time the AC
power cord is immediately unplugged after the power­off.
22
Page 23

How to Operate the On-Screen Menu

Basic Operation
The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual.
Press the MENU button on the top control or the
1
remote control to display the On-Screen Menu.
Use the Point ed buttons to highlight or select a main
2
menu item. Press the Point 8 or the SELECT button to access the submenu items. (The selected item is highlighted in orange.)
Use the Point ed buttons to select the desired
3
submenu item and press the SELECT button to set or access the selected item.
Use the Point ed7 8 buttons to adjust the setting or
4
switch between each option and press the SELECT button to activate it and return to the submenu.
Top Control
POINT buttons (arrowhead)
SELECT button
MENU button
Remote Control
POINT buttons (arrowhead)
SELECT button
MENU button
Press the Point 7 button to return to the main menu.
5
Press the MENU button to exit the On-Screen Menu.
On-Screen Menu
Point
8
or SELECT
button
The currently set item is check marked.
The selected item is highlighted in orange.
23
Page 24
RGB(PC digital)
Basic Operation

Menu Bar

For detailed functions of each menu, see “Menu Tree” on pages 70-71.
Main Menu Sub-Menu
Input
Used to select an input source from Computer 1, Computer 2 ,Video or S-video . (pp.29-30,39-40).
PC adjust
Select Auto PC adj., Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area-H and Display area-V to adjust
the parameters to match with the PC input signal format (p.32-34).
Image select
For computer source, used to select an image mode from among Dynamic, Standard, Real, Blackboard(Green),
Colorboard and image 1 - 4 (p.35).
For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green), Colorboard
and Image 1- 4 (p.42).
Image adjust
For computer source, used to adjust computer image [Contrast, Brightness, Color temp., White balance (R/G/B),
Sharpness and Gamma] (pp.36-37).
For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp., White balance (R/G/
B), Sharpness, Gamma, Noise reduction and Progressive] (pp.43-44).
Screen
For computer source, used to adjust size of the image [ Normal, True, Wide, Full, Custom and Digital zoom +/– ] (pp.36-37).
For Video source, used to set size of image [Normal, Wide and Custom] (p.45).
Sound
Used to adjust the volume or mute the sound (p.26).
Setting
Used to set the projector’s operating configurations (pp.46-59).
Information
Display the input source information: Input , H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp
counter , Power management, Key lock, PIN code lock and Remote control (p.60).
Network
See the owner’s manual of “Network Set-up and Operation”.
Guide
The key operation is displayed.
24
Page 25

Zoom and Focus Adjustment

Rotate the Zoom Ring to zoom in and out. Rotate the Focus Ring to adjust the focus of the image.

Auto Setup Function

Auto setup function is provided to automatically execute the setting of Auto setup (includes Input search, Auto PC adj. and Auto Keystone functions) in the setting menu by just pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control. Refer to page 47 for the setting of the Auto setup function.
Notes:
• Auto Keystone corrects vertical distortion only; it does not correct horizontal distortion.
• Auto Keystone cannot work when Ceiling feature is set to On in the Setting menu (p.52).
• Perfect correction of the image distortion cannot be ensured with the Auto setup function. If the distortion cannot be corrected properly by pressing the AUTO SETUP or AUTO SET button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu (p.48).
Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.33-34).
Basic Operation
Zoom Ring
Focus Ring
Top Control
AUTO SETUP button
POINT ed buttons
Remote Control
KEYSTONE button
AUTO SET button
POINT ed buttons

Keystone Correction

If a projected picture still has keystone distortion after pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control, correct the image manually as follows:
Press the KEYSTONE button on the remote control. The Keystone dialog box appears. Use the Point ed buttons to correct keystone distortion. The keystone adjustment can be stored (see page 48).
Reduce the upper width with the Point e button.
Reduce the lower width with the Point d button.
• The white arrows indicate that there is no correction.
• A red arrow indicates the direction of correction.
• An arrow disappears at the maximum correction.
• If you press the KEYSTONE button on the remote control once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled.
• The adjustable range is limited depending on the input signal.
25
Page 26
Basic Operation

Sound Adjustment

Direct Operation
Volume
Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds.
Mute
Press the MUTE button on the remote control to select On to temporarily turn off the sound. To turn the sound back on, press the MUTE button again to select Off or press the VOLUME +/– buttons. The Mute function is also effective for the AUDIO OUT jack.
Menu Operation
Press the MENU button to display the On-Screen Menu.
1
Use the Point ed buttons to select Sound. Press the Point 8 or the SELECT button to access the submenu items.
Use the Point ed buttons to select the desired submenu
2
item and press the SELECT button to access the selected item.
Top Control
Remote Control
Volume Dialog Box
VO L UME + /­buttons
VOL- button
VOL+ button
MUTE button
Approximate level of the volume.
Volume
Press the Point e button to turn up the volume; press the Point d button to turn down the volume.
Mute
Press the SELECT button to switch the mute function On/ Off. When the sound is turned off, On is displayed. Press
the VOLUME +/– buttons again to turn the sound back on.
Press the MUTE button to set the Mute function On or Off. The dialog box disappears after 4 seconds.
Sound Menu
26
Page 27
Basic Operation

Remote Control Operation

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER and VIDEO buttons
Press the COMPUTER and VIDEO buttons on the remote control to select the input source. See pages 29-30,39-40 for details.
FREEZE button
Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the Freeze function, press the FREEZE button again or press any other button. Fig.1 will appear on the Screen menu while the Freeze function is working.
Fig.1
INFO. button
Display the input source information: Input, H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter, Power management, Keylock, PIN code lock and Remote control (p.60).
D.ZOOM buttons
Press the D.ZOOM buttons on the remote control to enter to the Digital zoom +/– mode. See page 38 for details.
LAMP button
Remote Control
VIDEO button
COMPUTER button
INFO. button
FREEZE button
D.ZOOM buttons
LAMP button
Note:
See the next page for the description of other
buttons.
Press the LAMP button on the remote control to select the lamp mode for changing the brightness on the screen.
Normal ....... Normal brightness
Eco ............ Lower brightness reduces the lamp power
consumption and extends the lamp life.
27
Page 28
Basic Operation
02:02
NO SHOW button
Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. The screen changes each time you press the NO SHOW button as follows.
black out normal black out normal
• • • • •
P-TIMER button
Press the P-TIMER button on the remote control. The P-Timer display 00:00 appears on the screen and the countdown starts (00:00–59:59). To stop the countdown, press the P-TIMER button. To cancel the P-Timer function, press the P-TIMER button again.
IMAGE button
Press the IMAGE button on the remote control to select a desired image mode of the screen. See pages 35, 42 for details.
SCREEN button
Select the screen size (See pages 37-38, 45 for details).
No show disappears after 4 seconds.
P-Timer display
NO SHOW button
P-TIMER button
IMAGE button
SCREEN button
Note:
See the previous page for the description of
other buttons.
28
Page 29

Computer Input

RGB(PC digital)
NTSC
RGB(PC digital)

Input Source Selection (RGB: Computer 1/Computer 2(Analog))

Direct Operation
Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below.
Remote Control
COMPUTER button
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point ed buttons to select Input and then press the Point 8 or the SELECT button.
Use the Point ed buttons to select either Computer
2
1 or Computer 2 and then press the Point 8 button to
access the submenu items.
When Computer 1 is selected, use the Point ed
3
buttons to select RGB and then press the SELECT button.
Top Control
Input Menu
INPUT button
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
Video
S-video
When Computer 2 is selected, use the Point ed buttons to select RGB(Analog) and then press the SELECT button.
Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched automatically (p.47).
Computer
1
29
Page 30
Computer Input
RGB(PC digital)
NTSC

Input Source Selection (RGB(PC digital), RGB(AV HDCP))

Direct Operation
Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below.
Remote Control
COMPUTER button
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point ed buttons to select Input and then press the Point
Use the Point ed buttons to select Computer 2 and
2
then press the Point 8 button.
Use the Point ed buttons to select RGB(PC digital)
3
or RGB(AV HDCP) and then press the SELECT button.
or the SELECT button.
8
Top Control
Input Menu
INPUT button
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
Video
S-video
Note:
• When the Input Search function is set to On1 or On2, the input signal will be searched automatically (p.47).
• HDCP (High-bandwidth Digital Content Protection) is
a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.
30
Computer
2
Page 31
Computer Input
RGB(PC digital)
RGB(Computer 1)

Computer System Selection

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 73-74.)
One of the following messages may appear when:
Auto
-----
Mode 1
SVGA 1
*Mode 1 and SVGA 1 are examples.
The projector cannot recognize the connected signal conforming to the provided PC Systems. Auto is displayed on the System Menu box and the Auto PC Adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp.33-34).
There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on p.67.)
The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1–5 (pp.33-34).
PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it.
Selecting Computer System Manually
PC system can also be selected manually.
Press the MENU button to display the On-Screen
1
Menu. Use the Point ed buttons to select Input and then press the Point 8 or the SELECT button.
PC System Menu
The PC System Menu Selected system is displayed.
Customized Mode (1–5) set in the PC adjust Menu (pp.33-34).
PC System Menu
Use the Point ed buttons to select System and then
2
press the Point 8 or the SELECT button.
Use the Point ed buttons to select the desired system
3
and then press the SELECT button.
Systems in this dialog box can be selected.
31
Page 32
Computer Input

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer.
Menu Operation
Auto PC adj.
Press the MENU button to display the On-Screen
1
Menu. Use the Point ed buttons to select PC adjust and then press the Point 8 or the SELECT button.
Use the Point ed buttons to select Auto PC adj. and
2
then press the SELECT button.
To store adjustment parameters
The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1–5) in the PC System Menu (see page 31). See also “Store” on page 34.
Note:
Fine sync, Total dots, Horizontal and Vertical
position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.33-34).
• The Auto PC Adjustment cannot be operated when 480i,
575i, 480p, 575p, 720p,1035i or 1080i is selected in the PC System Menu (p.31).
PC adjust Menu
Use Point ed buttons to select Auto PC adj. and press the SELECT button. Please wait... appears while the Auto PC
adjustment is in process.
32
Page 33
Computer Input

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.
Press the MENU button to display the On-Screen
1
Menu. Use the Point ed buttons to select PC adjust and then press the Point 8 or the SELECT button.
Use the Point ed buttons to select the desired item
2
and then press the SELECT button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value.
Fine sync
Use the Point 7 8 buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31).
Total dots
Use the Point 7 8 buttons to adjust the number of total dots in one horizontal period to match your PC image.
Horizontal
Use the Point 7 8 buttons to adjust the horizontal picture position.
PC adjust Menu
Vertical
Use the Point 7 8 buttons to adjust the vertical picture position.
Clamp
Use the Point 7 8 buttons to adjust the clamp level. When the image has dark bars, try this adjustment.
Display area H
Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector.
Display area V
Use the Point 7 8 buttons to adjust the vertical area displayed by this projector.
33
Page 34
Computer Input
Reset
To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press the Point 8 or the SELECT button. Move the highlight to the Mode that you want to clear and then press the SELECT button.
Store
To store the adjusted data, select Store and then press the Point 8 or the SELECT button. Move the highlight to one of the Modes 1 to 5 in which you want to store, and then press the SELECT button.
Mode free
This Mode has stored parameters.
Values of Total dots, Horizontal,
Vertical, Display area H, and Display area V.
Store
Press MENU button to close this dialog box.
Note:
Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the
PC System Menu (p.31).
• PC adjust Menu cannot be selected when Computer 2(PC digital) and Computer 2(AV HDCP) are selected in
the Input Menu (p.30).
• When input computer signal to the projector, PC adjust will become available.
Press SELECT button to store adjusted data
Vacant
34
Page 35

Image Mode Selection

Direct Operation
Select the desired image mode among Dynamic, Standard, Real, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3 and Image 4 by pressing the IMAGE button on the
remote control.
Menu Operation
Press the MENU button to display the On-Screen Menu.
1
Use the Point ed buttons to select Image select and then press the Point 8 or the SELECT button.
Use the Point ed buttons to select the desired item
2
and then press the SELECT button.
Remote Control
IMAGE button
IMAGE button
Dynamic
Standard
Real
Blackboard
(Green)
Colorboard
Image 1
Image 2
Image 3
Image 4
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
Blackboard (Green)
For the image projected on a blackboard. This mode helps enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board.
Colorboard
At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors.
Image 1–4
For viewing with the user preset image mode in the Image Adjust Menu (see pages 36-37). This Image memory is provided in each computer, component, S-video and video input source.
Image select Menu
35
Page 36
Computer Input

Image Adjustment

Press the MENU button to display the On-Screen
1
Menu. Use the Point ed buttons to select Image adjust and then press the Point 8 or the SELECT
button.
Use the Point ed buttons select the desired item
2
and then press the SELECT button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value.
Contrast
Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63).
Brightness
Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63).
Color temp.
Use the Point 7 8 buttons to select the desired Color temp. level (XLow, Low, Mid, or High).
White balance (Red)
Press the Point 7 button to lighten red tone; press the Point
8 button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point 7 button to lighten green tone; press the Point 8 button to deepen green tone (from 0 to 63).
Image Adjust Menu
Selected Image mode
Use the Point 7 8 buttons to adjust the setting value.
White balance (Blue)
Press the Point 7 button to lighten blue tone; press the Point 8 button to deepen blue tone (from 0 to 63).
Sharpness
Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15).
Gamma
Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).
Reset
To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
36
Note:
• When White balance Red, Green or Blue is adjusted, Color temp. will change to User.
• When Blackboard(Green) or Colorboard is selected in Image select, Color temp. will change to Blackboard or Colorboard.
Page 37
Store
To store the adjusted data, select Store and press the Point
8 or the SELECT button. Use the Point ed buttons to select
one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select Yes. Stored data can be called up by selecting an Image (1–4) in the Image Mode Selection on page 35.

Screen Size Adjustment

This projector has the picture screen resize function, which enables you to customize the image size.
Computer Input
A confirmation box appears and then select Yes.
Screen Menu
Press the MENU button to display the On-Screen
1
Menu. Use the Point ed buttons to select Screen and then press the Point 8 or the SELECT button.
Use the Point ed buttons select the desired item and
2
then press the SELECT button .
Normal
Provide the image to fit the screen size.
True
Provide the image in its original size. When the original image size is larger or smaller than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.
Wide
Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9.
Full
Provide the full screen image.
Note:
• The Screen Menu, except for Normal and Custom, cannot be operated when 720p(HDTV), 1035i (HDTV), or 1080i (HDTV) is selected in the PC System Menu (p.31).
• This projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector.
• The image data in other than 1024 x 768 is modified to fit the screen size in initial mode.
True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p or 575p is selected in the PC System Menu (p.31).
37
Page 38
Computer Input
Custom
Adjust the screen scale and position manually with this function. Press the Point 8 button at Custom and the Custom is displayed on the screen, you can use the Point ed buttons to choose the item you want to adjust.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V ................... When set to On, the aspect ratio is
fixed. The Scale V appears dimmed and becomes unavailable. Adjust Scale H, then the screen scale is automatically modified based on the aspect ratio.
Position H/V ..... Adjust the Horizontal/Vertical screen
position.
Common ........... Save the adjusted scale or position to all
the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale or position, press the SELECT button at Yes. When Custom is selected, the saved scale or position is used.
Reset ................. Reset the all adjusted values. Press
the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at Yes.
For zooming in and out the images
Note:
• When no signal is detected, Normal is set automatically and the Aspect dialog box disappears.
• The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.
Remote Control
POINT buttons
Digital zoom +
Select Digital zoom +. The On-Screen Menu disappears and D. zoom + appears. Press the SELECT button to expand the
image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM e or the SELECT button on the remote control.
Digital zoom –
Select Digital zoom –. The On-Screen Menu disappears and D. zoom – appears. Press the SELECT button to compress
image size. The projected image can be also compressed by pressing the D.ZOOM d or the SELECT button on the remote control.
To exit the Digital zoom +/– mode, press any button except the D.ZOOM ed buttons, SELECT and Point buttons.
To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 29-30) again, or adjust the screen size with the D.ZOOM
ed buttons.
SELECT button
D.ZOOM + button
D.ZOOM - button
Note:
• The panning function may not operate properly if the stored Mode in the PC adjust Menu is used (p.34).
• The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size.
True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p or 575p is selected in the PC System Menu (p.31).
Digital zoom +/- cannot be selected when Full or True is selected.
• When Custom is selected, the Digital
zoom - function is disabled.
38
Page 39

Video Input

RGB(PC digital)

Input Source Selection (Video, S-video)

Direct Operation
Choose Video or S-video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below.
Menu Operation
Top Control
Remote Control
INPUT button
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
Video
S-video
VIDEO button
Video
S-video
Press the MENU button to display the On-Screen
1
Menu. Use the Point ed buttons to select Input and then press the Point
Use the Point
2
S-video and then press the SELECT button.
Video
S-video
When video input signal is connected to the VIDEO jack, select Video.
When video input signal is connected to the S­VIDEO jack, select S-video.
ed
or the SELECT button.
8
buttons to select either Video or
Input Menu
Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched automatically (p.47).
39
Page 40
Video Input
RGB(PC digital)
RGB(PC digital)

Input Source Selection (Component, RGB Scart 21-pin)

Direct Operation
Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below.
Remote Control
COMPUTER button
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point ed buttons to select Input and then press the Point 8 or the SELECT button.
Use the Point ed buttons to select Computer 1 and
2
then press the Point 8 button.
Use the Point ed buttons to select Component or
3
RGB(Scart) and then press the SELECT button.
Top Control
INPUT button
Input Menu
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
Video
S-video
Component
RGB (Scart)
Note:
When the Input Search function is set to On1 or On2,
the input signal will be searched automatically (p.47).
When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Component-VGA Cable, select Component.
When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Scart­VGA Cable, select RGB (Scart).
40
Page 41

Video System Selection

RGB(PC digital)
Component
Video Input
Press the MENU button to display the On-Screen
1
Menu. Use the Point ed buttons to select Input and then press the Point 8 or the SELECT buttons.
Use the Point ed buttons to select Video or S-video
2
or Computer 1(Component) and then press the SELECT button.
Use the Point ed buttons to select System and then
3
press the Point
buttons to select the desired system and then
ed
press the SELECT button.
or the SELECT button. Use the Point
8
Video or S-video
Auto
The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
AV System Menu (Video or S-video)
Component
Auto
The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.
Note:
The AV System Menu cannot be selected when selecting RGB (Scart).
AV System Menu (Component)
41
Page 42
Video Input

Image Mode Selection

Direct Operation
Select the desired image mode among Dynamic, Standard, Cinema, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3 and Image 4 by pressing the IMAGE
button on the remote control.
Menu Operation
Press the MENU button to display the On-Screen Menu.
1
Use the Point ed buttons to select Image select and then press the Point 8 or the SELECT button.
Use the Point ed buttons to select the desired item
2
and then press the SELECT button .
Dynamic
For viewing pictures in a bright room.
Remote Control
IMAGE button
Image select Menu
IMAGE button
Dynamic
Standard
Cinema
Blackboard (Green)
Colorboard
Image 1
Image 2
Image 3
Image 4
Standard
Normal picture mode preset on the projector.
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard. This mode help enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board.
Colorboard
At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors.
Image 1–4
For viewing with the user preset image mode in the Image Adjust Menu (see pages 43-44). This Image memory is provided in each computer, scart, component, S-video and video input source.
42
Page 43

Image Adjustment

Reset
Store
Reset
Store
Video Input
Press the MENU button to display the On-Screen
1
Menu. Use the Point ed buttons to select Image adjust and then press the Point 8 or the SELECT
button.
Use the Point ed buttons select the desired item
2
and then press the SELECT button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value.
Contrast
Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63).
Brightness
Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63).
Color
Press the Point 7 button decrease the intensity of the color; press the Point 8 button increase the intensity of the color (from 0 to 63).
Image Adjust Menu
Selected Image mode
Tint
Press the Point 7 8 buttons to adjust the tint value to get a proper color balance (from 0 to 63).
Color temp.
Use the Point 7 8 buttons to select the desired Color temp. level (High, Mid, Low, or XLow).
White balance (Red)
Press the Point 7 button to lighten red tone; press the Point
8 button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point 7 button to lighten green tone; press the Point 8 button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point 7 button to lighten blue tone; press the Point 8 button to deepen blue tone (from 0 to 63).
Note:
• When the White balance Red, Green or Blue is adjusted, the Color temp. level will change to User.
• Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.41).
• When Blackboard(Green) or Colorboard is selected in Image select, Color temp. will change to
Blackboard or Colorboard.
Use the Point 7 8 buttons to adjust the setting value.
43
Page 44
Video Input
Sharpness
Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15).
Gamma
Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Select one of the following options to get smoother images.
Off .......... Disabled.
L1 .......... Lower reduction
L2 .......... Higher reduction
Progressive
An interlaced video signal can be displayed in progressive mode. Select one of the following options.
Off .......... Disabled.
L1 .......... For an active picture.
L2 .......... For a still picture.
Film ........ For watching a film. With this function, the
projector reproduces pictures faithful to the original film quality.
Reset
To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
Store
To store the adjusted data, select Store and press the Point
8 or the SELECT button. Use the Point ed buttons to select
one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select Yes. Stored data can be called up by selecting an Image (1–4) in the Image Mode Selection on page 42.
Store Menu
Note:
Noise reduction and Progressive cannot be selected
when 480p, 575p, 720p, 1035i or 1080i is selected (p.41).
44
A confirmation box appears and then select Yes.
Page 45

Screen Size Adjustment

This projector has the picture screen resize function, which enables you to customize the image size.
Video Input
Press the MENU button to display the On-Screen
1
Menu. Use the Point ed buttons to select Screen and then press the Point 8 or the SELECT button.
Use the Point ed buttons select the desired item and
2
then press the SELECT button.
Normal
Provide the image at the 4:3 normal video aspect ratio.
Wide
Provide the image at the 16:9 wide screen ratio.
Custom
Adjust the screen scale and position manually with this function. Press the Point 8 button at Custom and the Custom is displayed on the screen, you can use the Point ed buttons to choose the item you want to adjust.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V ................... When set to On, the aspect ratio is
fixed. The Scale V appears dimmed and becomes unavailable. Adjust the Scale H, then the screen scale is automatically modified based on the aspect ratio.
Position H/V.....Adjust the Horizontal/Vertical screen
position.
Common ........... Save the adjusted scale or position to all
the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale or position, press the SELECT button at Yes. When Custom is selected, the saved scale or position is used.
Reset ................. Reset the all adjusted values. Press
the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at Yes.
Screen Menu
Note:
• When no signal is detected, Normal is set automatically and the Aspect dialog box disappears.
• The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.
Wide cannot be operated when 720p, 1035i or 1080i is selected in the AV System Menu (p.41).
45
Page 46

Setting

Closed caption
Closed caption

Setting

This projector has a Setting menu that allows you to set up the other various functions described below.
Press the MENU button to display the On-Screen
1
Menu. Press the Point ed buttons to select Setting and press the Point 8 or the SELECT button to access the submenu items.
Use the Point ed buttons to select the desired item
2
and then press the Point 8 or the SELECT button to access the selected item.
Use the Point ed buttons select the desired item and
3
then press the SELECT button.
Language
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, Japanese and Thai.
Setting Menu
Language
Menu position
This function is used to change the position of the On-Screen Menu. Select Menu position and press the SELECT button. The Menu position screen appears.
The Menu position changes each time you press SELECT button as follows. the top left the top right the center the bottom left
the bottom right the top left .....
46
Page 47
Setting
Closed caption
Auto setup
This function enables Input search, Auto Keystone correction and Auto PC adjustment by pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control. Settings for those functions can be altered as follows:
Input search
This function detects the input signal automatically. When a signal is found, the search will stop. Use the Point ed buttons to select one of the following options.
Off ........... Input search will not work.
On1.......... Input search works under the following situation.
– When pressing the AUTO SETUP button on
the top control.
– When pressing the AUTO SET button on the
remote control.
On2.......... Input search works under the following situation.
– When turning on the projector by pressing the
ON/STAND-BY button on the top control or the
remote control. – When pressing the AUTO SET button on the
remote control. – When pressing the AUTO SETUP button on
the top control. – When the current input signal is cut off.* * If the No show or Freeze function is active, cancel it to
activate the Input search. It is also unavailable when On­Screen menu is displayed.
Auto PC adj.
On. . . . . . . .Enables Auto PC Adjustment when pressing
the AUTO SET button on the remote control or the AUTO SETUP button on the top control.
Off . . . . . . .Disables Auto PC Adjustment.
Auto Keystone
Auto . . . . . Always works and corrects keystone distortion
according to the projector's tilt.
Manual . . . .Works only when pressing the AUTO SETUP
button on the top control or the AUTO SET button on the remote control.
Off . . . . . . .Disables Auto Keystone.
Note:
• While Input search is set to On1 or On2, the status of Input
and Lamp are displayed every time the signal is switched.
• Only the last selected input source can be detected.
• During Input search is in progress, if the INPUT button on the top control or the COMPUTER button or VIDEO button on the remote control is pressed, Input search will stop. If the INPUT button is pressed, the Input search will go back to the current seach signal. If the COMPUTER button or VIDEO button is pressed, Input search will go back to the button's input signal.
Input search, Auto PC adj. and Auto Keystone cannot be set Off at the same time.
Auto setup
Note:
Auto Keystone corrects vertical distortion only, not correct horizontal distortion.
• The Auto Keystone function cannot work when the Ceiling feature is set On in the Setting menu (p.52).
• Perfect correction of the image distortion cannot be ensured with the Auto setup function. If the distortion is not corrected properly by pressing the AUTO SETUP or the AUTO SET button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu (pp.25, 48).
Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.33-34).
47
Page 48
Setting
Closed caption
Keystone
This function is used to store or reset the keystone correction when the AC power cord is unplugged.
Store ....... Keep the keystone correction even when the
AC power cord is unplugged.
Reset ....... Release the keystone correction when the AC
power cord is unplugged.
To correct keystone distortion, press the SELECT button. Keystone appears on the screen. Use the Point ed buttons to correct keystone distortion (p.25).
Background
Select the background screen for when no input signal is detected. Press the Point ed buttons to switch between each option.
Blue . . . Project a blue background User . . . Project an image selected in the Logo setting. Black . . Project a black background
Keystone
Display
This function decides whether to display On-Screen Displays.
On ........................... Show all the On-Screen displays. Use
this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option.
Countdown Off....... Show the inp ut image instead of
the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.
Off ........................... Hide the On-Screen Displays except;
On-Screen Menu
Power off? (p.22)
P-Timer.
No signal for Power management
(p.53)
Please wait ...
Arrows for the True function in the Screen Menu (p.37)
P-Timer
48
Page 49
Logo (Logo and Logo PIN code lock settings)
Off
Off
Closed caption
This function allows you to customize the screen logo with
Logo select, capture, Logo PIN code lock and Logo PIN code change functions.
Note:
When On is selected in the Logo PIN code lock function,
Logo select and Capture functions cannot be selected.
Logo select
This function decides on the starting-up display from among following options.
Off ........... Show the countdown display only.
Default .... Show the factory-set logo.
User ........ Show the image you captured.
Setting
Logo select
49
Page 50
Setting
Off
Quit?
Off
Quit?
Capture
This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations.
Select Capture and press the SELECT button. A confirmation box appears and select Yes to capture the projected image.
After capturing the projected image, go to the Logo select function and set it to User. Then the captured image will be displayed the next time you turn on the projector.
To cancel the capture function, select Yes in the "Quit?" confirmation box.
Note:
• Before capturing an image, select Standard in the Image select Menu to capture a proper image (pp.35,
42).
• A signal from a computer can be captured up to XGA (1024 x 768). A signal from video equipment can be captured except for 720p, 1035i, and 1080i.
• When capturing the image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction.
• When Logo PIN code lock is set to On, capture cannot be selected.
• When starting to capture a new image, the previously stored image is cleared even if you cancel the capturing.
• When there is no captured image or it is interrupted while capturing an image, User cannot be selected, you can only switch between Default and Off.
Capture
Logo PIN code lock
This function prevents an unauthorized person from changing the screen logo.
Off ............ The screen logo can be changed freely from
the Logo Menu (p.49).
On ............ The screen logo cannot be changed without a
Logo PIN code.
If you want to change the Logo PIN code lock setting, press the SELECT button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo PIN code is set to “4321” at the factory.
50
Logo PIN code lock
Page 51
Enter a Logo PIN code
Off
Use the Point ed buttons to enter a number. Press the Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to “”. If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector.
If you entered an incorrect Logo PIN code, Logo PIN code and the number (✳✳✳✳) will turn red for a moment. Enter the correct Logo PIN code all over again.
Setting
Enter a Logo PIN code
After a correct Logo PIN code is entered, the following dialog box appears.
Change the Logo PIN code lock setting
Change the Logo PIN code lock setting
Use the Point ed buttons to switch On or Off, and then press the SELECT button to make a chioce.
Logo PIN code change
Logo PIN code can be changed to your desired four-digit number. Press the SELECT button to select Logo PIN code change. Logo PIN code dialog box appears, use the Point ed buttons to enter the correct code. The New Logo PIN code input dialog box appears. Set a new Logo PIN code, confirmation box appears, choose Yes to set the new Logo PIN code.
Be sure to note the new Logo PIN code and keep it on hand. If you lost the number, you could no longer change the Logo PIN code setting.
Select
Change the Logo PIN code
CAUTION: WHEN YOU HAVE CHANGED THE LOGO PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE LOGO PIN CODE NO. MEMO ON PAGE 79, AND KEEP IT SECURELY. SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING CAN NO LONGER BE CHANGED.
51
Page 52
Setting
Closed caption
more...
Ceiling
When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.
Rear
When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.
Closed Caption
Closed Caption is a function that displays the audio portion of a TV program as text on the screen. If the input signal. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press the Point ed buttons to select Off, CC1, CC2, CC3 or CC4. If the closed caption is not clear, you can change the text from Color to White.
Note:
The Closed Caption is available only under the situation
below..
• When the input signal is• When the input signal is NTSC of composite and
S-video, and the system is set according to the signal
or set on Auto.
• The system must be set on NTSC or Auto in Video System Selection. (p.41)
• The item of Closed Caption is displayed in gray while it
is not available.
• The Closed caption is unavailable when On-Screen
menu and P-Timer are displayed.
Ceiling
Rear
Closed Caption
52
Press the Point ed buttons to select Off, CC1, CC2, CC3 or CC4, and then Press SELECT button.
Page 53
Setting
Power management
For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period.
Select one of the following options:
Ready ............... When the lamp has been fully cooled
down, the POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the top control or remote control is pressed.
Shut down ....... When the lamp has been fully cooled
down, the power will be turned off.
Off .................... Power management function is off.
Timer ................ If the input signal is interrupted and
no button is pressed for more than 30 seconds, the timer display with No signal appears. It starts the countdown until the lamp is turned off. Use the Point ed buttons to set the Timer(1~30min).
Power management
Time left before Lamp is off.
Note:
Factory default is Ready: 5 min.
On start
When this function is set to On, the projector will be automatically turned on just by connecting the AC power cord to a wall outlet.
Note:
Be sure to turn off the projector properly (see “Turning
Off the Projector” on page 22). If the projector is turned off in the incorrect sequence, the On start function does not work properly.
53
Page 54
Setting
Standby mode
This function is available when operating the projector via network.
Network .... Supply the power to the network function even
after turning off the projector. You can turn on/ off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off.
Eco ............ Select Eco when you do not use the projector
via network. The projector’s network function will stop when turning off the projector.
Refer to the owner’s manual “Network Set-up and Operation”.
Note:
• Factory default is Network.
When selecting Network, the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off.
When Eco mode is selected and the projector is in Stand-by, the communication of RS-232C serial port is not available.
Lamp life control
Lamp control
Lamp control
This function allows you to change brightness of the
screen.
Normal ...... Normal brightness
Eco ............
Lamp life control
Select the lamp operation when the total lighting time of a
lamp exceeds the recommended total hours of use.
Mode 1 .............. The lamp can be turned on even after
Mode 2 .............. The lamp can be turned on even after
Note:
• Lamp mode cannot be changed for a while after turning
on the projector. Lamp needs some time to stabilize
after the power is turned on. Stored lamp mode will be
active after the lamp is stabilized.
• If Mode 2 has been selected and the projection lamp
exceedes the recommended total hours of use, the
replacement icon will be displayed at the time of power-
on. Then the projector will turn off after 3 minutes.
Lamp replacement icon
Lower brightness reduces the lamp power consumption and extends the lamp life.
exceeding the recommended total hours of use.
exceeding the recommended total hours of use. But the projector turns off automatically after 3 minutes.
• The Lamp replacement icon will not appear when the Display function is set to Off (p.48), during Freeze (p.27), or No show (p.28).
54
Page 55
Setting
Arrow
Pointer
You can emphasize a part of the projected image with this function. Use the Point ed buttons to choose Spotlight (Large, Middle or Small) , Arrow, Finger or Dot and press the SELECT button. See "Pointer Function" on page 13.
Pointer
Remote control
The eight different remote control codes (Code 1–Code 8) are assigned to the projector; the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). The same code should set on both the projector and the remote control. For example, operating the projector in
Code 7, the remote control code also must be switched to Code 7.
To change the code for the projector Select a remote control code in this Setting Menu. To change the code for the remote control: While holding down the MENU button, press the IMAGE
button the number of times corresponding to the remote control code for the projector. See “Remote Control Code” on page 13.
Note:
• When different codes are set on the projector and on the remote control, any operation cannot be made. In that case, switch the code on the remote control to fit the code on the projector.
• If the batteries are removed from the remote control for a long period of time, the remote control code will be reset.
Remote control
55
Page 56
Setting
Security (Key lock and PIN code lock)
This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation.
Key lock
This function locks the top control and remote control buttons to prevent operation by unauthorized persons.
Select Key lock and then press the SELECT button, and select the desired item by pressing the Point ed buttons.
..... Unlocked.
..... Lock the operation of the top control. To
unlock, use the remote control.
..... Lock the operation of the remote control.
To unlock, use the top control.
If the top control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center.
Key lock
PIN code lock
This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security.
Off ........... Unlocked.
On1 ......... Enter the PIN code every time turning on
the projector.
On2 ......... Enter the PIN code to operate the projector
once the power cord is disconnected; as long as the AC power cord is connected, the projector can be operated without a PIN code.
Whenever you change the PIN code lock setting or the PIN code (the four-digit number), you are required to enter the PIN code. The “1234” is set as the initial PIN code at the factory.
If you want to change the PIN code lock setting, Press the SELECT button and the PIN code dialog box appears.
When the projector is locked with the PIN code, the Security icon appears on the guide.
PIN code lock
56
Page 57
Enter a PIN code
Use the Point ed buttons to enter a number. Press the Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to “”. If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can change the following PIN Code lock setting.
If you entered an incorrect PIN code, PIN code and the number (✳✳✳✳) will turn red for a moment. Enter the correct PIN code all over again.
Setting
Enter a PIN code
Change the PIN code lock setting
Use the Point ed buttons to select OffOn1 or On2, and then press the SELECT button to make a choice.
Change the PIN code
The PIN code can be changed to your desired four-digit number. Press the SELECT button to select PIN code change. Pin code dialog box appears, use the Point ed buttons to enter the correct code. The New PIN code input dialog box appears. Set a new PIN code.
Change the PIN code
CAUTION: WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON PAGE 79, AND KEEP IT SECURELY. IF YOU FORGET YOUR PIN CODE, THE PROJECTOR CAN NO LONGER BE STARTED.
57
Page 58
Setting
Fan
This function provides the following options in the cooling fans’ operation when the projector is turned off (p.22).
L1 ...... Normal operation
L2 ...... Slower and lower-sound than the normal operation
(L1), but it takes more time to cool the projector down.
Fan control
This projector provides Fan control function in the Setting menu. Choose the running speed of cooling fans from the following options according to the ground elevation under which you use the projector.
Off................ Normal speed. Set this function to Off when
using the projector in non-high altitude environment.
On 1............. Faster than Off mode. Select this mode
when using the projector in high altitudes (about 1,200 meters or more above the sea level) where the fans have less cooling effect.
On 2............. Faster than On 1 mode. Select this mode
when using the projector in higher altitudes than above where the fans have lesser cooling effect.
Note:
The fan noise becomes louder in On 1 and On2.
Filter counter
This function is used to set a frequency for the filter cleaning.
Filter counter
When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select Reset and set the timer. The Filter warning icon will not turn off until the filter counter is reset.
For details about resetting the timer, refer to “Resetting the Filter Counter” on page 62.
Fig.1 Filter warning icon
Filter warning icon appears on the screen at a set time.
Note:
This icon also appears at turning on.
Note:
The Filter warning icon (Fig.1) will not appear when the
Display function is set to Off (p.48), during Freeze(p.27), or No show (p.28).
58
Press the SELECT button to select Timer, and then use the Point ed buttons to set the timer. Select from (Off/
100H/ 200H/ 300H) depending on the use environment.
Page 59
Warning log
Yes
No
This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order.
Note:
When the Factory default function is executed, all the
warning log records will be deleted.
Factory default
This function returns all setting values except for the User logo, PIN code lock, Logo PIN code lock, Lamp counter and Filter counter to the factory default settings.
Setting
Factory default
59
Page 60

Information

KHz Hz

Input Source Information Display

The Information Menu is used for checking the status of the image signal being projected and the operation of the projector.
Direct Operation
Press the INFO. button on the remote control to display the Information Menu.
Menu Operation
Press the Point ed buttons to select the Information. The Information Menu is displayed.
See below for displayed information.
Remote Control
INFO. button
Input
The selected input source is displayed.
H-sync freq.
The horizontal frequency of the input signal is displayed in
KHz, or - - - - KHz when no signal.
V-sync freq.
The vertical frequency of the input signal is displayed in Hz, or - - - - Hz when no signal. Numbers of Hz doubles when during Interlace.
Screen
The selected screen size is displayed.
Language
The selected language is displayed.
Lamp status
The selected lamp mode is displayed.
Lamp counter
The cumulative lamp operating time is displayed.
Power management Off, Ready, Shut down or Timer is displayed.
Information Menu
Key lock
The selected Key lock icon is displayed.
PIN code lock Off or On 1 or On 2 is displayed.
Remote control
The selected remote code is displayed.
60
Page 61

Maintenance and Cleaning

WARNING indicator

The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance.
The projector is shut down and the WARNING indicator is blinking red.
When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector. The POWER indicator is blinking while the projector is being cooled down. When the projector has cooled down enough (to its normal operating temperature), it can be turned on again by pressing the ON/ STAND-BY button.
Note:
The WARNING indicator continues to blink even after
the temperature inside the projector returns to normal. When the projector is turned on again, the WARNING indicator stops blinking.
Then check the matters below:
– Did you provide appropriate space for the projector to be
ventilated? Check the installing condition to see if the air vents of the projector are not blocked.
– Has the projector been installed near an Air-Conditioning/
Heating Duct or Vent? Move the installation of the projector away from the duct or vent.
– Is the filter clean? Clean the filter periodically.
Top Control
WARNING blinking red
The projector is shut down and the WARNING indicator lights red.
When the projector detects an abnormal condition, it is automatically shut down to protect the inside of the projector and the WARNING indicator lights red. In this case, unplug the AC power cord and reconnect it, and then turn the projector on once again to verify operation. If the projector cannot be turned on and the WARNING indicator still lights red, unplug the AC power cord and contact the service station.
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK.
Top Control
WAR NING em it a red light
61
Page 62
Maintenance and Cleaning

Cleaning the Filters

Filter prevents dust from accumulating on the optical elements inside the projector. Should the filters become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, clean the filters immediately. Clean the filters by following the steps below.
Turn off the projector, and unplug the AC power cord
1
from the AC outlet.
Turn the projector over and remove the filters .
2
Clean the filters softly by using a brush.
3
Replace the filters properly. Make sure that the filters
4
are fully inserted to the projector.
CAUTION
Do not operate the projector with the filters removed. Dust may accumulate on the optical elements degrading picture quality. Do not put anything into the air vents. Doing so may result in malfunction of the projector.
RECOMMENDATION We recommend avoiding dusty/smoky environments
when you operate the projector. Usage in these environments may cause poor image quality.
When using the projector under dusty or smoky conditions,
dust may accumulate on a lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning.

Resetting the Filter Counter

Be sure to reset the Filter counter after cleaning or replacing the filters.
Press the MENU button to display the On-Screen
1
Menu. Use the Point ed buttons to select the Setting and then press the Point 8 or SELECT buttons.
Filters.
Note:
When reinserting this
filter, be sure that the slit part is facing the outer side.
Filter counter
62
Use the Point ed buttons select Filter counter and
2
then press the Point 8 or SELECT button. Use the Point ed buttons to select Filter counter reset and then press SELECT button. The Filter counter Reset? appears. Select Yes to continue.
Another confirmation dialog box appears, select Yes to
3
reset the Filter counter.
The Filter counter Reset? appears.
Select Yes, then another confirmation box appears.
Select Yes again to reset the Filter counter.
Page 63

Attaching the Lens Cap

When moving this projector or while not using it over an extended period of time, replace the lens cap.
Attach the lens cap according to the following procedures.
Thread the string through the hole on the lens cap and
1
then tie a knot in the string to secure it in place.
To pass the other end of the string into the hole on the
2
bottom of the projector and pull at it.
Maintenance and Cleaning

Cleaning the Projection Lens

Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that contains a small amount of no n-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens.

Cleaning the Projector Cabinet

Unplug the AC power cord before cleaning.
Gently wipe the projector body with a soft dry cleaning cloth. When the cabinet is heavily soiled, use a small amount of mild detergent and finish with a soft dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the cabinet.
Wh en the projec tor is not in use, put the pr ojector in an appropriate carrying case to protect it from dust and scratches.
63
Page 64
Maintenance and Cleaning

Lamp Replacement

When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on the lamp mode.
Note:
• When Mode 2 is selected in the Lamp life control menu, if the projection lamp of the projector reaches its
end of life, the lamp replacement icon appears on the screen, and the projector is turned off automatically
after 3 minutes.
• The Lamp replacement icon will not appear when the Display function is set to Off (p.48), during Freeze
(p.27), or No show (p.28).
CAUTION
Allow a projector to cool for at least 45 minutes
before you open the Lamp Cover. The inside of
the projector can become very hot.
For continued safety, replace with a lamp of the same type. Do not drop a lamp or touch a glass bulb! The glass can shatter and may cause injury.
Top Control
LAMP REPLACE indicator
Lamp replacement icon
CAUTION
CAUTION
When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may be
broken.
If replacing the lamp of a projector which has been installed on the ceiling, you should always assume that
the lamp is broken, and you should stand to the side of the lamp cover, not underneath it. Remove the
lamp cover gently. Small pieces of glass may fall out when the lamp cover is opened. If pieces of glass get
into your eyes or mouth, seek medical advice immediately.
Follow these steps to replace the lamp.
Unplug the AC power cord. Let the projector cool for at
1
least 45 minutes.
Loosen the screw and open the lamp cover.
2
Loosen the three (3) screws that secure the lamp. Lift
3
the lamp out of the projector by using the handle.
Replace the lamp with a new one and secure the three
4
(3) screws. Make sure that the lamp is set properly. Close the lamp cover and secure the screw.
Connect the AC power cord to the projector and turn
5
on the projector.
Lamp Cover
Screw
Lamp
Screw
Screw
Handles
Screw
64
Page 65
Maintenance and Cleaning
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer.
Model No. of your projector : LC-XB100A, LC-XB200A
Replacement Lamp Type No. : POA-LMP131
(Service Parts No. 610 343 2069)
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.
Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee
of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamps.
If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights
up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.
(Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of
the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.
A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its
lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.
65
Page 66

Appendix

Troubleshooting

Before calling your dealer or service center for assistance, check the items below once again.
– Make sure you have properly connected the projector to peripheral equipment as described on pages 16-18. – Make sure all equipment is connected to AC outlet and the power is turned on. – When the projector does not project an image from the connected computer, restart the computer.
Problem: – Solutions
No power – Plug the power cord of the projector into the AC outlet.
– See if the POWER indicator lights red. – Wait until the POWER indicator stops blinking to turn on the projector
again. The projector can be turned on after the POWER indicator
turns red. See page 20. – Check the WARNING indicator. If the WARNING indicator lights red, projector cannot be turned on. See page 61. – Check the projection lamp. See page 64. – Unlock the Key lock function for the projector. See page 56.
The initial display is not shown. – Make sure Off or Countdown off are not chosen at display function. See page 48.
The initial display is not same – Make sure User or Off are not chosen at Logo (select) as the default set. function. See page 49.
Input signal switches automatically. – Make sure Input search function is adjusted properly. See page 47. (or does not switch automatically)
When the projector is on and you – That is the Filter warning icon. See page 58. press the input button, an icon other than the Lamp mode icon appears.
An icon other than Input mode or – That is the Lamp replacement icon or the Filter warning icon. See Lamp mode icon appears. pages 58 or 64.
Image is out of focus. – Adjust focus of the projector. See page 25.
– Provide proper distance between the projector and the projection screen. See page 15. – Check the projection lens to see if it needs cleaning. See page 63. – Moving the projector from a cool to warm place may result in moisture condensation on the projection lens. In such cases, leave the projector off and wait until condensation evaporates.
Image is Left/Right reversed. – Check the Ceiling/Rear function. See page 52. Image is Top/Bottom reversed. – Check the Ceiling function. See page 52.
Picture is not bright enough. – Check if the Contrast or Brightness is adjusted properly. See
pages 36,43. – Check if Image mode is selected properly. See pages 35,42. – Check the lamp control function. See pages 27,54. – Check the LAMP REPLACE indicator. If it lights, the end of lamp life is approaching. Replace the lamp with a new one promptly. See page
64.
66
Page 67
Appendix
No image – Check the connection between your computer or video equipment
and the projector. See pages 16-18. – See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connecting to a projector. See your computer’s instruction manual for the setting. – It takes about 30 seconds to display an image after turning on the projector. See page 20. – Check the Input signal, color system, video system or computer
system mode. – Make sure the temperature is not out of the specified Operating Temperature (41˚F–95˚F [5˚C–35˚C]). – When No Show is operating, the image cannot be displayed. Press the NO SHOW button or any other button on the remote control.
No sound – Check the audio cable connection from audio input source. – Adjust the audio source. – Press the Volume + button. See page 26. – Press the Mute button. See page 26. – When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. – Is the image projected? You will hear the sound only when the image is projected.
The color is strange. – Check the Input signal, color system,video system or computer system mode. – Make sure the Blackboard is not selected on Image select menu.See pages 35,42.
Some displays are not seen – Check the Display function. See page 48. during the operation.
Auto PC adjustment function – Check the Input signal. Auto PC adjustment function can not work does not work. when 480p,575p.720p,480i,575i,1035i or 1080i is selected. See Page 32.
The setting does not remain – Make sure you selected Store after adjusting setting. Some settings after turning off power. can not be stored if not registered with Store. See pages 37,44.
Power management does not – Power management function can not work while Freeze or No work. Show function is running. See page 53.
Capture function does not work. – Check the connection and the input signal to see if there is signal.
Auto setup does not work properly.
47. – Make sure On is not selected at the Ceiling function.See page 52.
Make sure Off is not selected at any function of Auto setup. See page
Auto keystone function does not – Make sure the Auto keystone function is not set to Manual. Press work even when the projector is the AUTO SETUP button on the top control.See pages 25,47.
tipped.
67
Page 68
Appendix
The image is distorted or runs off. – Check PC adjustment menu or Screen and adjust them.
See pages 33-34, 37-38.
PIN code dialog box appears – PIN code lock is being set. Enter a PIN code (the “1234” or numbers at start-up. you have set). See pages 21, 56-57.
Page Up/Down function does not – Make sure the USB infrared receiver is connected to the USB port of work. your computer. See page 14. – Check cable connection between the projector and your computer. See page 16.
The Remote Control does – Check the batteries. not work. – Make sure no obstruction is between the projector and remote control. – Make sure you are not too far from the projector when using the remote control. Maximum operating range is 16.4'(5 m). – Make sure the code of the remote control is conformed to the projector’s code. See page 55. – Unlock the Key lock function for the remote control function. See page 56. – Check RESET/ON/ALL-OFF switch on the remote control is set to
“ON”. See page 13.
Indicator blinks or lights. – Check the status of the projector with referring to "Indicators and projector Condition". See page 72.
Wireless Mouse function does not – Make sure the USB infrared receiver is connected to the USB port of work. your computer. See page 14. – Check the mouse setting on your computer. – Make sure the mouse driver is installed on your computer,
otherwise, the remote control can not be used as a wireless mouse. – Make sure the signal is from the computer, otherwise, the remote control can not be used as a wireless mouse. – Turn on the projector before turning on the computer.
The exclamation mark appears – Your operation is invalid. Operate correctly. on the screen.
Top control does not work. – The top control is not available if the top control is locked at Key lock under Security of SETTING section. See page 56.
Unable to unlock the Logo PIN – Contact the dealer where you purchased the projector or the service code lock, Security key lock center. or Security PIN code lock.
68
Page 69
Appendix
WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.
The CE Mark is a Directive conformity mark of the European Community (EC).
This symbol on the nameplate means th e product is Listed by Underwriters Laboratories I n c . I t i s d e s i gn e d a n d manufactured to meet rigid U.L. safety standards against r i s k o f f i r e, ca su a l t y a nd electrical hazards.
69
Page 70
Appendix

Menu Tree

Computer Input/Video Input
Input
Input
Sound
Sound
Volume Mute On/Off
Computer Input
System (1)
* Systems displayed in the System Menu vary
depending on an input signal.
Computer 1
Computer 2
Video
S-Video
SVGA 1 Mode 1 Mode 2
- - - -
0–63
RGB
Component
RGB (Scart)
RGB (PC digital)
RGB (AV HDCP)
RGB (Analog)
Image select
Dynamic Standard Real Blackboard (Green) Colorboard
Image 1 Image 2 Image 3 Image 4
Red/Blue/Yellow/Green
PC adjust
Auto PC adj.
Fine sync 0–31
Total dots Horizontal Vertical Clamp
Display area H Display area V
Reset Mode free
Store
Yes/No Mode 1 Mode 2 Mode 3 Mode 4 Mode 5
Mode 1 Mode 2 Mode 3 Mode 4 Mode 5
Image Adjust
Screen
Contrast Brightness Color temp.
Red Green Blue
Sharpness Gamma Reset Yes/No Store
Normal True
Wide Full Custom
Digital zoom + Digital zoom –
0–63 0–63
XLow
Low Mid High User 0–63 0–63 0–63 0–15 0–15
Image 1 Image 2 Image 3 Image 4
Scale H&V Position Common
Reset
H/V On/Off H/V Yes/No Yes/No
70
Page 71
Appendix
Video Input
Image select
Image Adjust
System (2)
System (3)
Auto 1080i 1035i 720p 575p 480p 575i 480i
Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N
Dynamic Standard Cinema Blackboard (Green) Colorboard
Image 1 Image 2 Image 3 Image 4
Contrast Brightness Color Tint Color temp.
Red Green Blue Sharpness Gamma
Progressive
Reset Store
Setting
Setting
Red/Blue/Yellow/Green
0–63 0–63 0–63 0–63
XLow Low Mid
High
User 0–63 0–63 0–63 0–15 0–15 OffNoise reduction L1 L2 Off L1 L2 Film Yes/No Image 1 Image 2 Image 3 Image 4
Language
Menu position
Auto setup
Keystone Background Display Logo
Ceiling
Rear
Power management
On start
Standby mode Eco/Network
Lamp control
Pointer Spotlight L / Spotlight M / Spotlight S /
Remote control Security
Warning log
17 languages provided.
Input search Off/On1/On2
Auto PC adj.
Auto keystone
Store/Reset Blue/User/Black Off /On/Countdown off Logo select
Capture
Logo PIN code lock
Logo PIN code change
On/Off
On/Off
Closed CaptionClosed Caption Color
On/Off
Lamp control
Lamp life control
Arrow / Finger / Dot
Code 1–Code 8 Key lock
PIN code lock
PIN code change
L1/L2Fan Offl/On1/On2Fan control
Filter counter Timer Filter counter reset
Yes/NoFactory default
On/Off
Auto Manual Off
Off Default User
Yes/No
Off/On
Off/CC1/CC2/CC3/CC4
Color/White
Ready Shut down Off Timer (1–30 Min)
Normal Eco
Mode 1/Mode 2
Off Projector Remote control
Off/On1/On2
HFilter counter Off/100H/200H/300H
Yes/No
Screen
Normal
Wide
Custom
Scale H&V Position Common
Reset
H/V
On/Off H/V Yes/No Yes/No
Information
Input Source Information Display
71
Page 72
Appendix

Indicators and Projector Condition

Check the indicators for projector condition.
Indicators
POWER
red/green
WARNING
red
LAMP
REPLACE
yellow
Projector Condition
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/STAND-BY button to turn on the projector.
The projector is operating normally.
The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed and the POWER indicator stops blinking.
The projector is in the Power management mode.
The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the POWER indicator stops blinking and the projector can be turned on. (The WARNING indicator keeps blinking.)
The projector has been cooled down enough and the temperature
• • • green. • • • red • • • off
• • • blinks green.
returns to normal. When turning on the projector, the WARNING indicator stops blinking. Check and clean the filters.
The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard.
• • • blinks red.
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this
indicator lights yellow, replace the projection lamp with a new one promptly.
72
Page 73

Compatible Computer Specifications

Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock.
When selecting these modes, PC adjustment can be limited.
Appendix
ON-SCREEN
DISPLAY
RESOLUTION
H-Freq.
(KHz)
V-Freq.
VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31.47 70.09 VGA 4 640 x 480 37.86 74.38 VGA 5 640 x 480 37.86 72.81 VGA 6 640 x 480 37.50 75.00 VGA 7 640 x 480 43.269 85.00
MAC LC13
640 x 480 34.97 66.60
MAC 13 640 x 480 35.00 66.67
480p
640 x 480 31.47 59.88
575p 768 x 575 31.25 50.00
480i 640 x 480 15.734 575i
768 x 576
15.625 SVGA 1 800 x 600 35.156 56.25 SVGA 2 800 x 600 37.88 60.32 SVGA 3 800 x 600 46.875 75.00 SVGA 4 800 x 600
53.674 SVGA 5 800 x 600 48.08 72.19 SVGA 6 800 x 600 37.90 61.03 SVGA 7 800 x 600 34.50 55.38 SVGA 8 800 x 600 38.00 60.51 SVGA 9 800 x 600 38.60 60.31
SVGA 10 800 x 600 32.70 51.09 SVGA 11 800 x 600 38.00 60.51
MAC 16 832 x 624 49.72 74.55 MAC 19 1024 x 768 60.24 75.08
XGA 1 1024 x 768
48.36 60.00 XGA 2 1024 x 768 68.677 84.997 XGA 3 1024 x 768 60.023 75.03 XGA 4 1024 x 768
56.476 70.07 XGA 5 1024 x 768 60.31 74.92 XGA 6 1024 x 768 XGA 7 1024 x 768 XGA 8 1024 x 768 XGA 9
1024 x 768 XGA 10 1024 x 768 XGA 11 1024 x 768 XGA 12 1024 x 768 XGA 13 1024 x 768 XGA 14 1024 x 768 XGA 15 1024 x 768
SXGA 1 SXGA 2
1152 x 864
1280 x 1024 62.50 58.60
48.50 60.02
44.00 54.58
63.48 79.35
36.00
62.04 77.07
61.00 75.70
35.522
46.90 58.20
47.00 58.30
58.03 72.00
64.20 70.40
SXGA 3 1280 x 1024 63.90 60.00 SXGA 4 1280 x 1024
63.34 59.98
(Hz)
60.00
(Interlace)
50.00
(Interlace)
85.06
87.17
(Interlace)
86.96
(Interlace)
ON-SCREEN
DISPLAY
RESOLUTION
SXGA 5 1280 x 1024 SXGA 6 1280 x 1024 SXGA 7 1280 x 1024 SXGA 8 1280 x 1024 SXGA 9 1280 x 1024
SXGA 10 1280 x 960
H-Freq.
V-Freq.
(KHz)
63.74 60.01
71.69 67.19
81.13 76.107
63.98 60.02
79.976 75.025
60.00 60.00
SXGA 11 1152 x 900 61.20 65.20 SXGA 12 1152 x 900 71.40 75.60 SXGA 13 1280 x 1024 50.00 SXGA 14 1280 x 1024 SXGA 15 1280 x 1024 SXGA 16 1280 x 1024 SXGA 17 1152 x 900
50.00
63.37 60.01
76.97 72.00
61.85 66.00 SXGA 18 1280 x 1024 46.43 SXGA 19 SXGA 20 SXGA+ 1 SXGA+ 2 SXGA+ 3
1280 x 1024
63.79 60.18
1280 x 1024 91.146 85.024 1400 x 1050 63.97 60.19 1400 x 1050
65.35 60.12
1400 x 1050 65.12 59.90
(Interlace)
(Interlace)
(Interlace)
MAC21 1152 x 870 68.68 75.06
MAC 1280 x 960 75.00 75.08 MAC 1280 x 1024 80.00 75.08
WXGA 1
1366 x 768 WXGA 2 1360 x 768 WXGA 3 1376 x 768 WXGA 4 1360 x 768 WXGA 6
1280 x 768 47.776 59.87 WXGA 7 1280 x 768 WXGA 8 1280 x 768 WXGA 9
1280 x 800 49.600
WXGA 10 1280 x 800
48.36
60.00
47.70 60.00
48.36 60.00
56.16 72.00
60.289 74.893
68.633 84.837
60.050
41.200 50.000
WXGA 11 1280 x 800 49.702 59.810 WXGA 12 1280 x 800 63.98 60.02 WUXGA 1 WUXGA 2 1920 x 1200
WSXGA+ 1 1680 x 1050
WXGA+ 1 WXGA+ 2 1440 x 900
UXGA 1 1600 x 1200 UXGA 2 1600 x 1200 UXGA 3 1600 x 1200
1920 x 1200 74.556 59.885
74.038 59.950
65.290 59.954
1440 x 900 55.935 59.887
74.918 60.000
75.00 60.00
81.25 65.00
87.5 70.00
UXGA 4 1600 x 1200 93.75 75.00
720p 1280 x 720
45.00 60.00
720p 1280 x 720 37.50 50.00 1035i 1920 x 1035 1080i 1080i
1920 x 1080 33.75 1920 x 1080 28.125
33.75
(Interlace)
(Interlace)
(Interlace)
(Hz)
86.00
94.00
86.70
60.00
60.00
50.00
73
Page 74
Appendix
When the input signal is digital from DVI terminal, refer to the chart below.
ON-SCREEN
DISPLAY
D-VGA 640 x 480 31.47 59.94 D-480p 640 x 480 31.47 59.88 D-575p 768 x 575 31.25 50.00
D-SVGA 800 x 600 37.879 60.32
D-XGA 1024 x 768 43.363 60.00 D-WXGA 1 D-WXGA 2 D-WXGA 3 1376 x 768 48.36 60.00 D-WXGA 4 D-WXGA 5 1366 x 768 46.500 50.000 D-WXGA 6 1280 x 768 47.776 59.870 D-WXGA 7 1280 x 768 60.289 74.893 D-WXGA 8 1280 x 768 68.633 84.837 D-WXGA 9 1280 x 800 49.572 59.870
D-WXGA 10 1280 x 800 41.200 50.000 D-WXGA 11 1280 x 800 49.702 59.810 D-WXGA 12 1280 x 800 63.98 60.02
RESOLUTION
1366 x 768 1360 x 768 47.7 60.00
1360 x 768
H-Freq.
(KHz)
48.36 60.00
56.160 72.000
V-Freq.
(Hz)
ON-SCREEN
DISPLAY
D-SXGA1 1280 x 1024 63.98 60.02 D-SXGA2 1280 x 1024 60.276 58.069 D-SXGA3 1280 x 1024 31.65 29.80
D-720p 1280 x 720 37.50 50.00
D-720p 1280 x 720 45.00 60.00 D-1035i 1920 x 1035 D-1080i 1920 x 1080 D-1080i 1920 x 1080
D-WUXGA 2 1920 x 1200 74.038 59.950 D-WXGA +1 1440 x 900 55.935 59.887
D-SXGA+1 1400 x 1050 63.97 60.16 D-SXGA+2 1400 x 1050 65.350 60.120 D-SXGA+3 1400 x 1050 65.120 59.900
D-WSXGA+1 1680 x 1050 65.290 59.954
Note:
The specifications are subject to change without notice.
RESOLUTION
H-Freq.
(KHz)
33.75
33.75
28.125
V-Freq.
(Hz)
60.00
(Interlace)
60.00
(Interlace)
50.00
(Interlace)
74
Page 75
Appendix

Technical Specifications

Mechanical Information
Projector Type Multi-media Projector
Dimensions (W x H x D) 12.80" x 3.27" x 9.12" (326mm x 83.1mm x 231.6mm) (Not including protrusions)
Net Weight 6.17 lbs (2.8 kg)
Feet Adjustment 0˚ to 12˚
Panel Resolution
LCD Panel System 0.63" TFT Active Matrix type, 3 panels
Panel Resolution 1,024 x 768 dots
Number of Pixels 2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color System
SD/HD TV signal 480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
Scanning Frequency H-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz
Optical Information
Projection Image Size (Diagonal) Adjustable from 30” to 300”
Throw Distance 2.3' - 23.7' (0.69m - 7.23m)
Projection Lens F 1.65 ~ 2.33 lens with f 15.5 mm ~ 24.5 mm with manual zoom and focusF 1.65 ~ 2.33 lens with f 15.5 mm ~ 24.5 mm with manual zoom and focus
Projection Lamp 225 W
Interface
Video Input Jack RCA Type x 1
S-video Input Jack Mini DIN 4 pin x 1
Audio Input Jacks RCA Type x 2
Computer 1 /Computer2 Audio Input Jacks Mini Jack x 2
Computer In 1/ Component Input Terminal Mini D-sub 15 pin x 1
Computer In 2/DVI-I Input DVI-I Terminal x 1
Monitor Output Terminal
Control port D-sub 9 pin x 1
Audio Output Jack Mini Jack (stereo) x 1 (variable)
LAN Connection Terminal RJ45
Audio
Internal Audio Amp 7.0 W RMS
Built-in Speaker 1 speaker, ø1.46" (37mm)
Power
Voltage and Power Consumption AC 100–120 V (3.7A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
AC 200–240 V (2.0A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)
Operating Environment
Operating Temperature 41˚F–95˚F (5 ˚C–35 ˚C)
Storage Temperature 14˚F–140˚F (-10˚C–60 ˚C)
Remote Control
Battery AAA or LR03 Type x 2
Operating Range 5 m/±30˚
Dimensions 45 mm (W) x 23 mm (H) x 145 mm (D)
Net Weight 3.5 oz 99 g (including batteries)
Laser Pointer
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
Mini D-sub 15 pin x 1
Class II Laser (Max. Output: 1 mW/Wave length: 640–660 nm)
75
Page 76
Appendix
Accessories
Owner’s Manual (CD-ROM)
Quick Reference Guide & Safety Manual
AC Power Cord
Remote Control and Batteries
VGA Cable
Lens Cap with String
PIN Code Label
Network Application (CD-ROM)
Soft Carrying Case
USB Infrared Receiver
The specifications are subject to change without notice.
LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are
effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.

Optional Parts

The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer.
Model No.
COMPONENT-VGA Cable : AH-98771
SCART-VGA Cable : AH-98881
76
Page 77
Appendix

PJ Link Notice

This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.
For PJ Link password, see the owner’s manual of “Network Set-up and Operation.”
Projector Input
Computer 2 (Analog)
Computer 2 (Digital)
Computer 1
Video
RGB (PC digital)
RGB (AV HDCP)
RGB
Component
RGB (Scart)
Video
S-video
PJLink Input
RGB 1
DIGITAL 1
DIGITAL 2
RGB 2
RGB 3
RGB 4
VIDEO 2
VIDEO 3
Parameter
11
31
32
12
13
14
22
23
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
77
Page 78
Appendix
5
1
2
34
10
9 678
15
14
13
11
12
8 7 6 5 4 3 2 1
1 9 17
2 10 18
3 11 19
4 12 20
5 13 21
6 14 22
7 15 23
8 16 24
C1
C2
C3
C5
C4

Configurations of Terminals

COMPUTER IN 1 /COMPONENT IN /MONITOR OUT (ANALOG)
Terminal: Analog RGB (Mini D-sub 15 pin)
Red (R/Cr) Input/Output
1
Green (G/Y) Input/Output
2
Blue (B/Cb) Input/Output
3 4
Ground (Horiz.sync.)
5
Ground (Red)
6
Ground (Green)
7
Ground (Blue)
8
COMPUTER 2 / DVI-I TERMINAL (DIGITAL/ANALOG)
Analog Red Input
C1
Analog Green Input
C2
Analog Blue Input
C3
Analog Horiz. sync
C4
Analog Ground (R/G/B)
C5
T.M.D.S. Data2–
1
T.M.D.S. Data2+
2
T.M.D.S. Data2 Shield
3
No Connect
4
No Connect
5
DDC Clock
6
DDC Data
7
Analog Vert. sync
8
-----
9
10
11 12 13 14 15
T.M.D.S. Data1–
9
T.M.D.S. Data1+
10
T.M.D.S. Data1 Shield
11
No Connect
12
No Connect
13
+5V Power
14
Ground (for +5V)
15
Hot Plug Detect
16
+5V Power/----­Ground (Vert.sync.)
Ground/-----
DDC Data
/----­Horiz. sync. Input/Output (Composite H/V sync.) Vert. sync.
DDC Clock
/-----
T.M.D.S. Data0–
17
T.M.D.S. Data0+
18
T.M.D.S. Data0 Shield
19
No Connect
20
No Connect
21
T.M.D.S. Clock Shield
22
T.M.D.S. Clock+
23
T.M.D.S. Clock–
24
78
LAN TERMINAL
TX +
1
TX –
2 3
RX +
4
5 6 7 8
-----
RX –
-----
----------
Page 79
Appendix

PIN Code Number Memo

Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station.
PIN Code Lock No.
Factory default set No: 1 2 3 4*
Logo PIN Code Lock No.
Factory default set No: 4 3 2 1*
*Should the four-digit number be changed, the factory set number will be invalid.
While the projector is locked with the PIN code.
Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code.
79
Page 80
Appendix
93.5(3.68)
232.5(9.15)
121.9(4.80)
109.7(4.32)
143.3(5.64)
9.5 (0.37)
101(3.98)
107.6(4.24)
219.4(8.64)
23(0.91)
55(2.17)
25(0.98)
51.9 (2.05)
80.5(3.17)
12 M
AX
º
3.8 (0.15)
42.3 (1.67)
24.8 (0.98)
40.8 (1.61)
<
<
<
<
<

Dimensions

Unit: mm(inch)
Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.472)
80
Page 81
U.S.A.
EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : usa@eiki.com
Deutschland & Österreich
EIKI Deutschland GmbH Am Frauwald 12 65510 Idstein Deutschland Tel : 06126-9371-0 Fax : 06126-9371-14 E-Mail : info@eiki.de
China
EIKI (Shanghai) Co., Ltd. Lakeside Oasis Middle Ring Business Centre Block 10. #16-07, 1628, Jin Sha Jiang Road, Shanghai, 200333. China Main Line : 86-21-3251-3993 Service Hot Line : 86-21-3251-3995 Fax : 86-21-3251-3997 E-mail : info@eiki-china.com
Canada
EIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel : 800-563-3454 (705)-527-4084 Fax : 800-567-4069 (705)-527-4087 E-Mail : canada@eiki.com
Eastern Europe
EIKI CZECH SPOL. s.r.o. Nad Cementárnou 1163/4a Praha 4, Podolí 147 00 Czech Republic Tel : +420 241 410 928 +420 241 403 095 Fax: +420 241 409 435 E-Mail : info@eiki.cz
South East Asia
EIKI Industrial (M) Sdn Bhd No. 3A-2C, 4th Floor, Jalan PJU 8/3A, Perdana Business Centre, Bandar Damansara Perdana, 47820 Petaling Jaya, Selangor Malaysia Tel : +603-7722-4362 Fax : +603-7722-4392 E-Mail : sales@eiki.my
Japan & Worldwide
EIKI Industrial Company Limited. 4-12 Banzai-Cho, Kita-Ku, Osaka, 530-0028 Japan Tel : +81-6-6311-9479 Fax : +81-6-6311-8486
WorldWide Website http://www.eiki.com
KG5BE
©2009 Eiki International, Inc.
Loading...