EIKI EK-103X User Manual

OWNER'S MANUAL
EK-103X
Features and Design
Simple Computer System Setting
The projector has the Multi-scan system to conform to almost all computer output signals quickly. Up to WUXGA resolution can be accepted.
Useful Functions for Presentations
The digital zoom function allows you to focus on the crucial information during a presentation.
Lamp Control
Brightness of the projection lamp can be selected.
Logo Function
The Logo function allows you to customize the screen logo.
Multilanguage Menu Display
The screen menu of the projector is available in 26 languages: English, German, French, Italian, Spanish, Polish, Swedish, Dutch, Portuguese, Japanese, Simplified Chinese, Traditional Chinese, Korean, Russian,Arabic, Turkey, Finland, Norway, Denmark, Indonesia, Hungary, Czech Republic, Kazakhstan, Vietnamese, Thai, Farsi.
Helpful Maintenance Functions
Lamp and filter maintenance functions provide for better and proper maintenance of the projector.
Security Function
The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the top control or remote control. PIN code lock function prevents unauthorized use of the projector.
Auto Setup Function
This function enables input source search, auto pc adjust by simple pressing the AUTO button.
Colorboard Function
At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors.
Power Management
The Power management function reduces power consumption and maintains the lamp life.
Closed Caption
This is a printed version of the program sound or other information displayed on the screen. You can turn on the feature and switch the channels.
Note:
- The screen menu and pictures in the manual may slightly differ from the real product.
- The manual is subject to change without prior notice.
2
Contents
Features and Design ..................................................... 2
Contents ........................................................................ 3
Safety Instructions ......................................................... 4
Safety Guide .................................................................. 5
Air circulation ............................................................ 6
Moving the projector ................................................. 6
Installing the projector properly ................................. 6
Compliance.................................................................... 7
Accessories ................................................................... 8
Part names and functions .............................................. 9
Front.......................................................................... 9
Back .......................................................................... 9
Bottom....................................................................... 9
Terminals ................................................................ 10
Top control and Indicators ...................................... 11
Remote control........................................................ 12
Install remote control batteries ................................ 13
Operating range ...................................................... 13
Installation ................................................................... 14
Positioning the projector ......................................... 14
Adjustable foot ........................................................ 14
Connecting to computer (Digital and
analog RGB) ........................................................ 15
Connecting to video equipment
(Video, S-Video) .................................................. 16
Connecting the AC power cord .............................. 17
Basic operation ............................................................ 18
Turn on the projector .............................................. 18
Turn off the projector............................................... 19
Adjust zoom and focus............................................ 20
Auto setup function ................................................. 20
Keystone ................................................................. 20
Remote control operation........................................ 21
Input select.............................................................. 23
How to operate the screen menu ............................ 24
Menu bar ................................................................. 25
Display ........................................................................ 26
Auto PC adj. ............................................................ 26
Fine sync................................................................. 26
H Position................................................................ 26
V Position ................................................................ 26
H.Size ..................................................................... 26
Aspect ..................................................................... 27
Project Way............................................................. 27
Menu Position ......................................................... 28
Background Display ................................................ 28
System .................................................................... 29
Color adjust ..............................................................30
Image Mode .........................................................30
Color adjust (Computer).......................................31
Color adjust (Video,S-video,Component) ............32
Setting ......................................................................33
On start ................................................................33
Standby mode ......................................................33
High land ..............................................................34
Lamp control ........................................................34
Cooling fast ..........................................................34
Closed Caption ....................................................35
Key lock ...............................................................35
HDMI setup ..........................................................36
Expand .....................................................................37
Language .............................................................37
Auto setup ............................................................37
Keystone ..............................................................38
Logo .....................................................................39
Security ................................................................40
Power management ............................................41
Filter counter ........................................................41
Test Pattern .........................................................42
Factory default .....................................................42
Lamp counter reset ..............................................42
Information................................................................43
Maintenance and cleaning........................................44
WARNING indicator .............................................44
Cleaning the lter .................................................45
Filter counter reset ...............................................45
Clean the projector lens .......................................46
Clean the cabinet .................................................46
Replace the lamp .................................................47
Order Replacement lamp .....................................48
Appendix...................................................................49
Troubleshooting ...................................................49
Menu Tree............................................................51
Indicator and projector state ................................54
Compatible computer specications ....................55
Technical Specications ......................................56
Congurations of terminals ..................................57
Content of hazardous substances
and elements......................................................58
Dimensions ..........................................................58
PIN code memorandum .......................................59
3
Safety Instructions
0.7’(20cm)
1.5’(50cm)
3’(1m)
3’(1m)
Please read this manual completely before installing and operating the projector. The projector provides many convenient features and functions. Proper operation may enable you to fully utilize the features and keep it in good condition. Otherwise, it will not only shorten the service life of the unit, but also may cause malfunction, a fire, or other accidents. If your projector cannot work properly, please read this manual again, check the operating methods and cable connection, and try the solutions in the part of Troubleshooting. If the problem still exists, contact the dealer or the service center. The lamp of the projector is a wearing part. The luminance may decrease after a period of operation and be weaker than that of a new lamp. This is normal. Please strictly follow the steps in Turning on the unit and Turning off the unit to turn on/off the projector, and the requirements in Maintaining and cleaning the projector to service and clean the projector regularly. Otherwise the high temperature residual heat may not radiate, greatly shorten the service life of the projector and lamp, or even damage them within a short period.
Caution
ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE USER’S MANUAL WITH THIS UNIT.
FOR EU USERS The symbol mark and recycling systems described below apply to EU countries and do not apply to countries in other areas of the world. Your product is designed and manufactured with high quality materials and components which can be recycled and/or reused. The symbol mark means that electrical and electronic equipment, batteries and accumulators, at their end of life, should be disposed of separately from your household waste. Note: If a chemical symbol is printed beneath the symbol mark, this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead In the European Union there are separate collection systems for used electrical and electronic equipment, batteries and accumulators. Please, dispose of them correctly at your local community waste collection/recycling centre. Please help us to conserve the environment we live in!
Safety precautions
Caution: The projector must be grounded.
Do not expose the projector to raindrops
or high humidity to avoid a re or electric
shock.
- This projector produces intense light from the projection lens. Avoid staring directly into the lens, otherwise eye damage could be caused.
Be especially careful that children do not stare
directly into the beam.
- Place the projector in a proper position.
Otherwise it may result in re hazard.
- Leave an appropriate space from the top, sides, and back of the shell in order to ventilate and cool
down the projector. The gures below indicate the minimum distance to be left. It must be satised if
the projector is placed in sealed environment like a cabinet.
SIDE and TOP REAR
- Do not cover the vent of the projector. Poor radiation may shorten the service life or even cause dangers.
- Remove the AC power plug if the projector is not to be used for a long time.
- Do not project the same image for a long time; otherwise, a residual image may appear on the LCD panel due to its characteristic.
Caution:
Do not set the projector in greasy, wet, or smoky conditions such as in a kitchen, to prevent a malfunction or accident. If the projector comes in contact with oil or chemicals, it may become deteriorated. Read and keep this manual for future reference.
The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable.
Caution:
Contains mercury
For more information on safe handling procedures, the measures to be taken in case of accidental breakage and safe disposal options visit: ec.gc.ca/mercure-mercury/ Dispose of or recycle in accordance with applicable laws.
4
Safety Guide
All the safety and operating instructions should be read before the product is operated.
Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.
Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the manufacturer as they may cause hazards. Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or an adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the manufacturers.
An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
Slots and openings in the back and bottom of the cabinet are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating.
The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.
This projector should not be placed in a built- in installation such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a
re or electric shock. Never spill liquid of any kind on
the projector.
Do not install the projector near the ventilation duct of air-conditioning equipment.
This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.
Do not overload wall outlets and extension cords as
this can result in re or electric shock. Do not allow
anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening or removing Covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualied service personnel.
Unplug this projector from wall outlet and refer
servicing to qualied service personnel under the
following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often
require extensive work by a qualied technician to
restore the projector to normal operation. e. If the projector has been dropped or the cabinet has been damaged. f. When the projector exhibits a distinct change in performance-this indicates a need for service.
When replacement parts are required, be sure the service technician has used replacement parts
specied by the manufacturer that have the same
characteristics as the original part. Unauthorized
substitutions may result in re, electric shock, or injury
to persons.
Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.
Information for users in the European Union
This is a device to project images onto a screen,etc., and is not intended for use as indoor lighting in a domestic environ­ment. Directive 2009/125/EC.
NOTE FOR CUSTOMERS IN THE US
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL STATE OR FEDERAL LAWS.
5
Safety Guide
(
M4x10
10mm
Torque:1.40N.m
Air circulation
Vents in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.
Caution
Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.
- Do not put any ammable objects, or spray
can near the projector. Hot air is exhausted from the air vents.
- Keep the exhaust vent at least 1m away from any objects.
- Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area will become hot while the projector is being used.
- Do not put anything on the projector. Objects put on the cabinet will not only get damaged
but also may cause re hazard by heat.
- Cooling fans are provided to cool down the projector.
- The fan’s running speed is changed according to the temperature inside the projector.
– Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For more information about transporting the projector by courier or any other transport service, consult your dealer. – Do not put the projector in a case before it is cooled enough.
Installing the projector properly
Please set the projector on nearly-level. Be sure to install the projector properly. Improper installation may reduce the lamp
lifetime and even cause a re hazard.
Do not roll the projector over 10 from side to side.
Do not pitch the projector more than 10o backward and forward.
Do not point the projector up to project an image.
Do not point the projector down to project an image.
Do not put the projector on either side to project an image.
o
Exhaust Vent
Air Intake Vent
Moving the projector
When moving the projector, take care of the lens and retract the adjustable feet to prevent damage to the lens and cabinet.
Caution in moving or transporting the projector
– Do not drop or bump the projector, otherwise damages or malfunctions may result. – When carrying the projector, use a suitable carrying case.
6
Caution in ceiling installation the projector
– Only qualied personal is authorized for ceiling
installation.
– We are not responsible for the hurt and damage
caused by ceiling bracket that purchased from unauthorized dealer even in warranty period.
– Remove the ceiling bracket immediately while
not use.
– While installing, torque screwdriver is
suggested, don't use electric or impact-type screwdriver.
– Please read the manual of bracket for details.
Compliance
ASA
FCC Caution
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the
instructions. If such changes or modications should be made, you could be required to stop operation of
the equipment. Model Number : EK-100 series Trade Name : EIKI Responsible party : EIKI International,Inc. Address : 30251 Esperanza Rancho Santa Margarita CA 92688-2132 Telephone No. : 800-242-3454 (949-457-0200)
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.
AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted.
WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET OUTLET.
The Wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow ...... . . Earth
Blue ................. Neutral
Brown ............... Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
WARNING: THIS APPARATUS MUST BE EARTHED.
. If the fuse cover is detachable, never use the plug with the
or coloured green or green-and-yellow.
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
7
VGA VIDEO HDMI
MENU
INPUT
FREEZE
MUTE
BLANK
LAMP
PATTERNKEYSTONE
TIMER
INFO.SCREEN
IMAGE
AUTO
+ +
- -
D.ZOOM VOLUME
VGA VIDEO HDMI
MENU
INPUT
FREEZE
MUTE
BLANK
LAMP
PATTERNKEYSTONE
TIMER
INFO.SCREEN
IMAGE
AUTO
+ +
- -
D.ZOOM VOLUME
VGA VIDEO HDMI
MENU
INPUT
FREEZE
MUTE
BLANK
LAMP
PATTERNKEYSTONE
TIMER
INFO.SCREEN
IMAGE
AUTO
+ +
- -
D.ZOOM VOLUME
VGA VIDEO HDMI
MENU
INPUT
FREEZE
MUTE
BLANK
LAMP
PATTERNKEYSTONE
TIMER
INFO.SCREEN
IMAGE
AUTO
+ +
- -
D.ZOOM VOLUME
VGA VIDEO HDMI
MENU
INPUT
FREEZE
MUTE
BLANK
LAMP
PATTERNKEYSTONE
TIMER
INFO.SCREEN
IMAGE
AUTO
+ +
- -
D.ZOOM VOLUME
Accessories
AC Power cord
Remote control with batteries
(AAA or LR3)
Safety Information
VGA cable
Quick start guide
8
Part names and functions
Front
Back
Remote control receiver
Lamp cover
Focus adjust ring
Top control panel and indicator
Filter
Projector Lens
Zoom adjust ring
AC cord connector
Terminals
Anti-thief bar
Kensington Security Slot
Bottom
Adjustable foot
Exhaust vent
Caution
Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.
9
Part names and functions
Terminals
VGA IN/YPbPr/S-VIDEO IN
This is the terminal to input RGB, YPbPr or S-video signals.
VGA OUT
Output the analog signal from ① to other monitor.
VIDEO IN
This is the terminal to input video signals.
HDMI
This is the terminal to input HDMI signals.
RS-232C
When using RS232 to control the projector, please connect the serial control line to this terminal.
Kensington Security Slot
This slot is for a Kensington lock used to deter theft of the projector. * Kensington is a registered trademark of
ACCO Brands Corporation
10
Part names and functions
Top control and Indicators
MENU
Open or close the screen menu.
▲▼◄►
- Select an item or adjust the value in the screen menu.
- Select the image display area in digital zoom + mode.
POWER
Turn on/off the projector.
WARNING indicator(Refer to Page 54)
- It flashes red when the internal projector temperature is beyond the operating temperature range.
- It lights red when the power supply of the projector is abnormal.
POWER indicator(Refer to Page 54)
- It lights red when the projector is in stand- by mode.
- It lights green during normal operations.
- It ashes green in the Power management
mode.
- It ashes red during fans cooling.
AUTO
Perform various settings congured
automatically, including the "Input search" and "Auto PC adj.".
OK
- Enter menu operation.
- Execute the selected item.
INPUT
Select an input source.
11
Remote control
Part names and functions
INPUT
⑪ ⑭
⑮ ⑱
VGA VIDEO HDMI
MENU
AUTO
IMAGE
LAMP
+ +
D.ZOOM VOLUME
FREEZE
MUTE
BLANK
TIMER
PATTERNKEYSTONE
INFO.SCREEN
- -
POWER
Turn on or turn off the projector.
INPUT
Open or close the input source menu.
VGA
Select "Computer 1" as input source.
VIDEO
Select "Video" as input source.
HDMI
Select “HDMI” as input source.
AUTO
Enter auto setup adjust mode.

- Select an item or adjust the value in
- Select the image display area in
digital zoom + mode.
OK
Enter the menu or select an item in the menu.
button
the screen menu.
KEYSTONE
Correct the keystone distortion.
IMAGE
⑬ ⑯
Select the image mode.
FREEZE
Freeze the projected image.
PATTERN
Set the internal test image.
SCREEN
Select the screen size.
LAMP
Select the lamp mode.
MUTE
This function is not available for this model.
INFO.
Display the projector information.
D.ZOOM + / -
Digital zoom in / zoom out the image.
VOLUME + / -
This function is not available for this model.
BLANK
Temporarily close the image on the screen.
TIMER
Enable the timer function.
MENU
Open or close the screen menu.
12
Part names and functions
Install remote control batteries
Open the battery cover.
To ensure safe operation, please observe the following precautions:
● Use two (2) AAA or LR3 type alkaline batteries.
● Always replace batteries in sets.
● Do not use a new battery with a used battery.
● Avoid contact with water or liquid matter.
● Do not expose the remote control to moisture or heat.
● Do not drop the remote control.
● If the battery has leaked in the remote control, carefully wipe the case clean and
install new batteries.
● Risk of explosion if two batteries are replaced by an incorrect type.
● Dispose of used batteries according to the instructions on the battery or local
regulations or guides.
Install new batteries.
Two AAA batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment.
Put the cover
back.
Operating range
Point the remote control toward the remote control receivers on the projector when pressing any button.
The maximum operating range for the remote control is about 5 meters and 60 degrees.
5m
30°
30°
13
Installation
30”
(Diagonal:Inch)
Max.
Min.
(Center)
0.9m(1.0m)
3.0m(3.3m)
4.5m(5.0m)
6.1m(6.6m)
9.1m(9.9m)
10.9m(11.9m)
Positioning the projector
Note:
● The brightness in a room has a great inuence on picture quality. It is recommended to limit the
ambient lighting in order to get the best image.
All measurements are approximate and may vary from the actual sizes.
4:3
30" 100" 150" 200" 300"
610x457 2032x1524
30" 100" 150" 200" 300"
664x374 2214x1245
3048x2286 4064x3048
3321x1868 4428x2491
Adjustable foot
6096x4572
6641x3736
Note: The data in "()" is the project distance for 16:9 aspect ratio.
Adjustable foot
The projector can be adjusted up to 40 mm (10 degree) with the adjustable foot. Rotate the adjustable foot to lift the projector to a certain height. During lifting, rotate the foot clockwise. To lower or retract the adjustable foot, rotate the foot counterclockwise. Keystone distortion of projected images can be corrected by manually, remote control operation or menu operation.
Screen size (WxH)mm 4:3 aspect ratio Maximum 0.9m 3.0m 4.5m 6.1m 9.1m
Minimum 1.1m 3.6m 5.5m 7.3m 10.9m
16:9
Screen size (WxH)mm 16:9 aspect ratio Maximum 1.0m 3.3m 5.0m 6.6m 9.9m
Minimum 1.2m 4.0m 6.0m 7.9m 11.9m
14
Installation
Connecting to computer (Digital and analog RGB)
Cables used for connection:
● VGA cable ● Serial cable(crossover type)*
● HDMI cable*
(*=Cables are not supplied with the projector)
Serial cable
RS232 output
RS232 input
VGA cable
VGA output
VGA input
VGA cable
VGA input
VGA output
HDMI output
HDMI input
HDMI cable
Unplug the power cords of both the projector and external equipment from the AC outlet
before connecting the cables.
15
Installation
Connecting to video equipment (Video, S-Video)
Cables used for connection:
● S-video cable** ● Component conversion cable**
● Video cable*
(*=Cables are not supplied with the projector) (**=Dedicated cable is required and can be ordered through your dealer)
S-video
output
Component output
Video output
Video input
Video cable
S-video cable
S-video
input
Component conversion cable
Component input
Unplug the power cords of both the projector and external equipment from the AC outlet
before connecting the cables.
16
Installation
Connecting the AC power cord
This projector uses nominal input voltages of 100–240V AC and it automatically applies to different input voltages. It is designed to work with a single-phase power system having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning it on.
Note:
The AC outlet should be near this equipment and must be easily accessible.
Note:
For safety, unplug the AC power cord when the projector is not in use. When the projector is connected to an outlet with AC power cord, it is in stand-by mode and consumes a little electric
power.
Note on the power cord
AC power cord must meet the requirements of the country where you use the projector. Conrm the AC
plug type with the chart below and proper AC power cord must be used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side
For the U.S.A. and
Canada
Ground
Connect the AC power cord (supplied) to the projector.
AC outlet side
For Continental
Europe
For the U.K.
Ground
To power cord connector on your projector.
Note:
Using incorrect power cord may inuence the product performance, or even cause hazards like an electric shock or re. To ensure the product performance and security, please apply the cable of the
same model with the original one.
To the AC outlet. To the AC outlet.
To the AC outlet.
17
Basic operation
Turn on the projector
1. Complete peripheral connections (with a computer, video,etc.) before turning on the projector.
2. Connect the projector’s AC power cord into the AC outlet. The POWER indicator turns red.
3. Press the POWER button on the top control or on the remote control. The POWER indicator becomes green and the cooling fans start to work. The preparation display appears on the screen.
4. If the projector is locked with a PIN code, a PIN code input dialog box appears. Enter the PIN code as instructed below.
Note:
● When the logo select is set to be "Off", the
logo will not be displayed on the screen.(See page 39)
Enter a PIN code
Press the OK button, press ◄► button to
select a number and press the OK button to enter it to the PIN code box, then number changes to "*", automatically move the cursor to next box. If you fixed an incorrect number, press MENU button to reset it again.
Repeat the steps to complete entering a three­digit number. After entering the three-digit number, automatically move the cursor to "Set", press the OK button then you can start to operate the projector. If you entered an incorrect "PIN code", the number (***) turn red. PIN code will be reset within one second automatically, Enter the correct PIN code all over again.
What is PIN code? PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting the PIN code can prevent unauthorized use of the projector. A PIN code consists of a three-digit number. Refer to the PIN code lock function in the "Expand" "Security" menu on page 40 for PIN code lock operation of the projector.
16
PIN Code
Set
Cancel
----- Input PIN code Back
Move Select Back
OK Esc
PIN Code
*
Set
Cancel
OK Esc
Move the cursor to "Set", and press "OK".
Caution on handling the PIN code If you forget your PIN code, the projector can no longer be started. Take a special care in setting a new PIN code. Write down the number in a column on page 59 of this manual and keep it properly. Should the PIN code be missing or forgotten, consult your dealer or service center.
18
Basic operation
Turn off the projector
1. Press the POWER button on the top control or on the remote control, and "Power off?" appears on the screen.
2. Then, press the POWER button again in 4 seconds. The POWER indicator starts to
ash red, and the cooling fans keep running
(You can select the fan noise and running speed). Now you can unplug the AC power cord after the fans stop running. Otherwise, the service life of the projector will be affected or the projector will can not be turned on or turn on abnormal.
3 When the projector has cooled down enough to be turned on again, the POWER indicator
stops ashing.
To maintain the lamp life, once you turn the projector on, wait at least 5 minutes before turning it off.
Do not operate the projector continuously
without reset. Continuous use may result
in shortening the lamp life. Turn off the projector and let it standby for about an hour in every 24 hours.
Note:
● When the On start function is “On” , this
projector is turned on automatically by
connecting the AC power cord to an AC outlet .
● The running speed of cooling fans is changed
according to the temperature inside the projector.
● Do not put the projector in a case before it is
cooled enough.
● If the POWER indicator flashes or emits a
red light, see page 54.
● While the POWER indicator is flashing, the
lamp is being cooled down and the projector
cannot be turned on. Wait until the POWER
indicator turns red to turn on the projector again.
● The fan rotation will terminate directly if the AC power cord is unplugged immediately
after the projector is turned off.
● The projector can be turned on after the POWER indicator turns red. The waiting time
to restart will be shortened when the normal power-off processing for fan cooling is
completed, comparing with the time the AC
power cord is immediately unplugged after the power-off.
Power off ?
“Power off ? ” disappears after 4 seconds.
19
Basic operation
VGA VIDEO HDMI
MENU
INPUT
FREEZE
MUTE
LAMP
PATTERNKEYSTONE
INFO.SCREEN
IMAGE
AUTO
Adjust zoom and focus
Rotate the ZOOM ring to zoom in or zoom out the image.
Rotate the FOCUS ring to adjust the focus of the image.
Auto setup function
This function is available just by pressing the AUTO button on the remote control or top control. The system then automatically performs various settings in the "Expand" menu, including "Input search" and "Auto PC adj.".
Keystone
If a projected image has keystone distortion, follow the steps below to manually correct the keystone distortion.
Press KEYSTONE button on the remote control. The Keystone screen will displayed, press
V Keystone
Adjusts when the vertical crapezoid of the projected image is distorted.
● The arrows are white when there is no correction.
● The arrows that are used for correction turns red.
● Press  button long time, the arrows turn red and can be adjusted quickly
● The arrows disappear at the maximum correction.
● If you press the KEYSTONE button on the
remote control once again while the keystone
dialog box is being displayed, the keystone
adjustment is canceled.
● The adjustable range can be limited depending
on the input signal.
to adjust the image.

V Keystone
 
ZOOM ring (Back)
Top control
AUTO button
Remote control
AUTO button
KEYSTONE button
FOCUS ring (Front)

button
20
Basic operation
Remote control operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to quickly without calling up the screen menu.
FREEZE button Press FREEZE button on the remote control, video will be paused and the audio is muted. The icon is displayed on the screen during Freeze. Press FREEZE button again, the video playback resumes and the audio is unmuted.
IMAGE button Press IMAGE button on the remote control to select the image mode you want. (Dynamic / Standard / Cinema / Blackboard (Green) / Colorboard / User Image)
LAMP button Press LAMP button to select a lamp mode to change the brightness of the screen.
Normal ...Normal brightness.
ECO ...... Lower brightness, reducing the
lamp power consumption and extending the lamp life.
Remote control
IMAGE
LAMP
INPUT
VGA VIDEO HDMI
MENU
AUTO
IMAGE
LAMP
+ +
D.ZOOM VOLUME
- -
FREEZE
MUTE
BLANK
TIMER
FREEZE
PATTERNKEYSTONE
INFO.SCREEN
INFO
INFO button Press INFO button on the remote control to display the projector information.
Note: See the next page for the description of other buttons.
21
VGA VIDEO HDMI
MENU
INPUT
FREEZE
MUTE
BLANK
LAMP
PATTERNKEYSTONE
TIMER
INFO.SCREEN
IMAGE
AUTO
+ +
- -
D.ZOOM VOLUME
02
02
Basic operation
BLANK button
Press BLANK button on the remote control to black out the image. To restore to normal, press the BLANK button again or press any other button.
The screen changes each time you press the button as follows:
Black out →Normal →Black out →Normal ...
TIMER button Press TIMER button. The timer display “00:00” appears on the screen and the timer starts to count time (00:00–59:59). To stop the Timer, press TIMER button. Press TIMER button again, and then the Timer display disappears.
SCREEN button Press SCREEN button on the remote control to select the screen size you want. (Normal / Wide / Full)
D.ZOOM+ button Press D.ZOOM+ button, the on-screen menu will disappear while the information on digital zoom + appears.
Blank Image
Blank
“Blank” disappears after 2 seconds if there is no other button operation.
Timer display
Remote control
Press ▲▼◄►to move the image horizontally and
vertically.
The moving is effective only when the image is larger than the size of the screen.
D.ZOOM- button Press D.ZOOM- button, the on-screen menu will disappear while the information on digital zoom appears.
To return to normal size, select “ SCREEN” button on the remote control to adjust screen size.
Note:
- D.ZOOM doesn't work when the screen size is Full.
22
SCREEN
D.ZOOM +/-
BLANK
TIMER
Basic operation
Input select
Direct Operation Press VGA, ViIDEO or HDMI on the re mote control as input source.
Menu operation 1 Press INPUT button on the top control or remote controll to display the input select menu.
2 Press
Component, Video or S-video, then press the OK button.
VGA
HDMI
Component
button to select VGA, HDMI,

When input source is from
computer connected to VGA
terminal with VGA cable, please
select "VGA"..
When input source is from
equipment connected to HDMI
terminal with HDMI cable, please
select "HDMI".
Select it when the input source is from the video equipment connected to YPbPr terminal.
Remote control
INPUT
VGA
INPUT
VGA VIDEO HDMI
AUTO
Top control
Input select menu
VGA
HDMI
Component
Video
S-video
MENU
INPUT button
VIDEO
HDMI
Video
Select it when the video input signal is connected to VIDEO IN terminal.
S-video
Select it when the video input signal is connected to S-VIDEO IN terminal.
Note:
- When the "Input search" function is set to "On" in the "Auto setup" function, press AUTO button, the input signal will be searched automatically.
23
VGA VIDEO HDMI
INPUT
Basic operation
How to operate the screen menu
The projector can be adjusted or set via the on-screen menu. Each main menu can be divided into several levels of submenus, and subme nus are also divided into several levels of submenus. For each adjustment and setting procedure, refer to the respective sections in this manual.
1 Press the MENU button on the remote control or top control to display the screen menu.
2 Press menu and then press the OK button to enter the submenu.
3 Press press the OK button to set or enter the submenu.
4 Press among the items. Press the OK button for corresponding operation.
5 Press top control to go back to the previous menu. Press MENU button again to exit the screen menu.
buttons to select an entry in the main

buttons to select an item, and then

buttons to adjust settings or switch

button on the remote control or
Top control

MENU button
Remote control
MENU button
Screen menu
button
OK button
OK button
AUTO
MENU
IMAGE
FREEZE

button
PATTERNKEYSTONE
24
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
17
0
0
0
Normal
Front
Center
Blue
1024 x 768, 60Hz
Menu bar
Basic operation
Display
Main menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
Sub menu
17
0
0
0
Normal
Front
Center
Blue
1024 x 768, 60Hz
- Adjust computer parameters to match with VGA input signal format: Auto PC adj., Fine sync, H Position, V Position and H.Size.
- Aspect: Normal and Wide.
- Project way: select a project way among Front, Rear, Ceiling/Front, and Ceiling/Rear,
- Menu position: set the menu's position on the screen.
- Background display: set the background display color.
- System: select a system signal format to match the input source.
Color adjust
- Image mode: the available image modes is Standard, Dynamic, User Image, Colorboard,
Blackboard(Green) or Cinema.
- Image color adjust: If a computer is selected as a signal source, the following image adjusting options are available: Contrast, Brightness, Color temp., White balance (R/G/B) and Sharpness. If video equipment is selected as a signal source, the following image adjusting options are available: Contrast, Brightness, Color, Tint, White balance (R/G/B) and Sharpness.
Setting
Congure basic operation settings of the projector: On start, Standby mode, High land, Lamp control,
Cooling fast, Closed caption, Key lock and HDMI setup.
Expand
Configure expand operation settings of the projector: Language, Auto setup, Keystone, Logo, Security, Power management, Filter counter, Test Pattern, Factory default and Lamp counter.
Info.
The system information of the projector.
25
Display
Auto PC adj.
Auto PC Adjustment function is provided to automatically adjust Fine sync, Horizontal, Vertical and H.Size to conform to your computer.
Menu operation
Auto PC adj.
1. Press MENU button on the remote control or top control to display screen menu. Press  button to select "Display", then press the OK button.
2. Press  button to select "Auto PC adj.", then press the OK button. "Please wait" will be displayed on the screen, the Auto PC adj. function will be executed.
Auto PC adj. Menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
17
0
0
0
Normal
Front
Center
Blue
1024 x 768, 60Hz
Fine sync
You can cut off icker from the image displayed
by pressing  to adjust the value.(from 0 to
31).
H Position
Press  to adjust the horizontal image position.
V Position
Press  to adjust the vertical image position.
H.Size
This function is used to adjust and minimize the effect of interference caused by projection of patterns consisting of vertical stripes. The projection of the vertical striped pattern may cause cyclic patterns (noise). Adjust to minimize the amount of interference.(From -15 to +15). H.Size must be set before adjust Fine sync.
√ Note: The adjustment of Fine sync, H Position, V Position and H.Size is only for computer
signal input.
Note:
- The projector executes the Auto PC adj.
automatically when the computer signals input
the projector for the rst time.
- Automatic adjustment may not work depending
on the model of the computer and the input signal.
- The Auto PC adj. cannot be operated when
480i, 576i, 480p, 576p, 720p 1080i or 1080p is
selected in the "Display" menu → "System", or when the signal is coming from the HDMI
terminal.
26
Display
Aspect
You can set a screen size to t the image while
maintaining the aspect ratio of the input signal.
1. Press  to select "Aspect" and then press the OK button.
2. Press  button to select the item, then press the OK button.
Normal
Projects the image at the maximum size while maintaining the aspect ratio of the input signal.
Wide
Projects the image at 16:9 aspect ratio.
Full
To provide an image to t the screen.
Advanced (PC input only) Adjust the proportion and position of the screen manually.
Project Way
This function is used to set the project way. 1 Press MENU button on the remote control to display screen menu. Press  button to select "Display", then press the OK button. 2 Press button to select "Project way", press the OK button. 3 Press button to select the item you want to set, press the OK button.
Front
Projects to front screen when projector is front standing.
Rear
Projects to rear screen when projector is front standing.
Ceiling/Front
Projects to front screen when projector is in ceiling state.
Ceiling/Rear
Projects to rear screen when projector is in ceiling state.
Aspect menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
Project way menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
Normal
Front
Center
Blue
1024 x 768, 60Hz
Normal
Front
Center
Blue
1024 x 768, 60Hz
17
0
0
0
17
0
0
0
27
Display
Menu Position
This function is used to change the position of screen menu. 1 Press MENU button on the remote control to display screen menu. Press  button to select "Display", then press the OK button. 2 Press button to select "Menu position", press the OK button. 3 Press button to select the item you want to set, press the OK button.
Upper left
Menu locates on upper left of the screen.
Upper right
Menu locates on upper right of the screen.
Center
Menu locates at the center of the screen.
Lower left
Menu locates on lower left of the screen.
Lower right
Menu locates on lower right of the screen.
Background Display
This function is used to select the screen background of the projector when there is no signal detected. 1 Press MENU button on the remote control or top control to display screen menu. Press  button to select "Display", then press the OK button. 2 Press  button to select "Background display", press the OK button. 3 Press  button to select the item you want to set, press the OK button.
Black .... Select black background.
Blue ...... Select blue background.
Menu position
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
Background display
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
Normal
Center
1024 x 768, 60Hz
Normal
Front
Center
Blue
1024 x 768, 60Hz
Front
Blue
17
17
0
0
0
0
0
0
28
Display
System
Computer system select
The projector automatically tunes to various types of computers with its function of Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, the projector automatically detects the signal format and tunes to project proper images without any additional setting.
One of the following messages may appear:
Auto
When the projector cannot recognize the connected signal conforming to the provided computer system, Auto is displayed on the System menu box and the Auto PC Adj. function works to display proper images. If the image is not projected properly, a manual adjustment is required.
There is no signal input from computer.
-----
Check the connection between your computer and projector.
System menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
17
0
0
0
Normal
Front
Center
Blue
1024 x 768, 60Hz
Select computer system manually
The system can also be selected manually. 1 Press MENU button on the remote control or on top control to display the screen menu. Press  button to select the "Display" icon, and press the OK button. 2 Press  button to select "System" and press the OK button. 3 Press  button to select your required system, and then press the OK button.
Note:
When HDMI is selected, System menu for
computer is disable.
Video or S-video
Auto
The projector automatically detects an incoming video system,and adjusts itself to optimize its performance. When Video System is PAL-M, PAL-N or PAL60, select the system manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N/ PAL60
If the projector cannot reproduce proper video
images, select a specic broadcast signal format
from PAL, SECAM, NTSC, NTSC 4.43, PAL-M, PAL-N and PAL60.
System
System for computer signal
Display
System
1024 x 768, 60Hz
----
----
----
----
----
System for Video or S-video signal
Display
System
AUTO
PAL
SECAM
NTSC
NTSC4.43
PAL-M
PAL-N
PAL60
29
VGA VIDEO HDMI
MENU
INPUT
AUTO
Color adjust
Color adjust menu is used to set the image mode and adjust the image.
1 Press MENU button on the remote control or
top control to display screen menu. Press
 button to select "Color adjust", then press the OK button. 2 Press button to select the item you want to set, press the OK button. 3 Press button to adjust the item, then press the OK button.
Image Mode
Direct operation
Press IMAGE button on the remote control to select the image mode.
Menu operation
1 Press MENU button on the remote control or top control to display screen menu. Press  button to select "Color adjust" menu, then press the OK button. 2 Press button to select "Image mode", press the OK button. 3 Press button to select the item you want to set, press the OK button.
Dynamic
The light output is maximized for use in bright areas.
Remote control
IMAGE
LAMP
Image mode (Computer)
Color adjust
Image mode
Contrast
Brightness
Color temp.
Red
Green
Blue
Sharpness
FREEZE
MUTE
PATTERNKEYSTONE
INFO.SCREEN
button
Standard
32
32
Mid
32
32
32
8
IMAGE
Standard
The picture becomes suitable for moving images in general.
Cinema
For watching movies with multiple gray scale levels.
Blackboard (Green)
For viewing the image projected on a blackboard (green) by enhancing the image quality. This is mainly effective on a green colored board instead of a black colored board.
Colorboard
For images projected onto a red, blue, yellow, or green wallpaper.
User Image
Image quality preset by the user in the Image adjustment menu.
30
Color adjust
Color adjust (Computer)
1 Press MENU button on the remote control or top control to display screen menu. Press  button to select "Color adjust", then press the OK button. 2 Press button to select the item you want to set, press the OK button. 3 Press button to adjust the data.
Contrast
Press  to decrease the contrast and  to increase it.
Brightness
Press  to decrease the brightness and  to increase it.
Color temp.
Press to select color temperature.( Low, Mid and High )
Red (White balance)
Press  to lighten the red tone and  to deepen it.
Green (White balance)
Press  to lighten the green tone and  to deepen it.
Color adjust (Computer)
Color adjust
Image mode
Contrast
Brightness
Color temp.
Red
Green
Blue
Sharpness
Standard
32
32
Mid
32
32
32
8
Blue (White balance)
Press  to lighten the blue tone and  to deepen it.
Sharpness
Press  to decrease the sharpness of the image and  to increase it.
31
Color adjust
Color adjust (Video,S-video,Component)
1 Press MENU button on the remote control or top control to display screen menu. Press  button to select "Color adjust", then press the OK button. 2 Press button to select the item you want to set, press the OK button. 3 Press button to adjust the data.
Contrast
Press  to decrease the contrast and  to increase it.
Brightness
Press  to decrease the brightness and  to increase it.
Color
Press  to decrease the chroma and  to increase it.
Tint
Press  to select the appropriate tone for the image.
Red (White balance)
Press  to lighten the red tone and  to deepen it.
Green (White balance)
Press  to lighten the green tone and  to deepen it.
Color adjust (Video,S-video, Component)
Color adjust
Image mode
Contrast
Brightness
Color
Tint
Red
Green
Blue
Sharpness
Standard
32
32
32
32
32
32
32
8
Blue (White balance)
Press  to lighten the blue tone and  to deepen it.
Sharpness
Press  to decrease the sharpness of an image and  to increase it.
√ Note:
- Signal input "Video", "S-video" or "Component",
"Tint" is in grey, it is disable.
- If you only adjust projector to "Video", "S-video" or "Component" , "Sharpness" is disable.
32
Setting
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
HDMI Setup
Off
Eco
Off
Normal
Off
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
HDMI Setup
Off
Eco
Off
Normal
Off
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
HDMI Setup
Off
Eco
Off
Normal
Off
The projector has "Setting" menu that allows you to set the other various functions described as follows.
1 Press MENU button on the remote control or top control to display screen menu. Press  button to select "Setting", then press the OK button. 2 Press button to select the item you want to set, press the OK button. 3 Press button to adjust the item, then press the OK button.
Setting menu
On start
Enable the projector to be turned on automatically just by connecting the AC power cord to an outlet when this function is set to On.
On
Start the projection immediately, enter countdown display.
Off
Start up in the standby mode.
Standby mode
This function is available when operating the projector via network. Press button to select the item below:
Eco.
Restrict some functions in the standby mode to reduce power consumption. In this case, you cannot use network functions and some RS-232C commands.
Normal
Do not restrict network function and serial communication function even in the standby mode.
On start
Standby mode
33
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
HDMI Setup
Off
Eco
Off
Normal
Off
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
HDMI Setup
Off
Eco
Off
Normal
Off
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
HDMI Setup
Off
Eco
Off
Normal
Off
High land
Enable to control the fan through the Setting menu. You can select the running speed of the fan according to the altitude of the location where the projector is installed.
Off
Normal speed. Set it so if the projector is operated at a lower altitude.
On
Faster than Off. Set it so if the projector is operated at a higher altitude as fans will produce weaker effects.
Note:
Please set High land "On" when operating the
projector higher than 1400 meters.
Lamp control
Change the brightness of the screen.
Normal .... Normal brightness.
Eco .......... Lower brightness, reducing
power consumption and extending the lamp life.
Setting
High land
Lamp control
Cooling fast
This function provides the following options in the cooling fans' operation after turning off the projector.
Normal (90 sec)
Normal cooling speed.
60 sec
Faster and lounder than Normal, cooling time is shorter.
0 sec
Enable you directly unplug the AC power cord after turning off the projector, no need waiting for cooling.
Note:
When it is set to "0 sec", you cannot restart the projector immediately after the power-off. The lamp remains high temperature and needs to be cooled, so it takes longer time than
usual for the lamp to light up again.
34
Cooling fast
Setting
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
HDMI Setup
Off
Eco
Off
Normal
Off
Closed Caption
Allows the subtitle to be displayed for the audio contents or other information. If the input source contains closed caption, you can enable this function and change the channel. Press
to select Off, CC1, CC2, CC3 or CC4.

Note:
- The icon of Closed Caption is displayed in
grey when it is disable.
- Closed caption is disable when screen menu
or Timer displayed on screen.
Key lock
This function allows you to use the Key lock to set the security for the projector operation. Select "Key lock" and press the OK button, then press  button to select the item you want.
Off ............... Unlock.
Projector
Lock the operation of the top control. To unlock, use the remote control.
Closed Caption
Key lock
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
HDMI Setup
Eco
Normal
Off
Off
Off
Remote Control
Lock the operation of the remote control. To unlock, use the top control.
If the top control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center.
35
Setting
HDMI setup
When the external equipment is connected to "HDMI" terminal, if the image is not projected properly, please select the settings from the HDMI Setup menu.
1 Press the MENU button to display the screen menu. Press  button to select the "Setting" menu icon. Press the OK to enter the submenu entry. 2 Press  button to select "HDMI setup" and then press the OK button. 3 Press  button to switch the item
64-940 ....... Select when the HDMI terminal
of an external device (such as a blu- ray player) is connected to the" HDMI" terminal.
0-1023 ...... Select when the DVI-D terminal
output of an external device (such as a computer) is connected to the "HDMI" terminal via a conversion cable or similar cable. Select also when the HDMI terminal output of a computer or other device is connected to the "HDMI" terminal.
Note:
The optimal setting varies depending on the output setting of the connected external
device. Refer to the operation instruction of
the external device regarding the output of the external device.
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
HDMI Setup
Off
Eco
Off
Normal
Off
36
Expand
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Factory default
Lamp counter
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Factory default
Lamp counter
The projector has Expand menu that allows you to set the other various expand functions described as follows.
1 Press MENU button on the remote control to display screen menu. Press  button to select "Expand", then press the OK button. 2 Press  button to select the item you want to set, press the OK button. 3 Press  button to adjust the item, then press the OK button.
Language
This projector provides multi-language screen menu.
You can press button to select the language you want.
26 languages: English, German, French, Italian, Spanish, Polish, Swedish, Dutch, Portuguese, Japanese, Simplified Chinese, Traditional Chinese, Korean, Russian,Arabic, Turkey, Finland, Norway, Denmark, Indonesia, Hungary, Czech Republic, Kazakhstan, Viet­namese, Thai, Farsi.
Auto setup
Press AUTO button on the remote control to execute "Input search" and "Auto PC adj." functions.
Input search
Allows you to automatically detect input signals. It stops when a signal is found. Press
button to select an option below:

On ........ Enabled. This function is used to
detect input signals automatically
and stops when nding a signal.
Off ........ Disabled.
Auto PC adj.
On ........ Press the AUTO button on the
remote control or top control to enable Auto PC adj. function automatically.
Off ........ Cancel Auto PC adj. function.
Expand menu
Auto setup
Note:
- "Input search" and "Auto PC Adj." cannot be set to "Off" at the same time. At least one of them is set to "On".
37
Expand
Expend
Keystone
Keystone
V Keystone
Store
Keystone
This function is used to store or reset the keystone correction when the AC power cord is unplugged.
1 Press MENU button on the remote control to display screen menu. Press  button to select "Expand", then press the OK button. 2 Press button to select "Keystone", press the OK button. 3 Press button to select the item you want to set, press the OK button.
Keystone
Sets whether or not to keep the keystone correction after turn off the projector or plug out the power cord.
Store ..... The keystone correction will be kept when plug out the power cord or turn off the
projector.
Reset .... When "Standby mode" is set to "Eco", plug out the power cord or turn off the projector,
the keystone correction will be canceled. When "Standby mode" is set to "Normal", plug out the power cord, the keystone correction will be canceled; turn off the projector, the keystone correction will be kept.
V Keystone
Adjust when the vertical trapezoid of the projected image is distorted.
Reduce the upper width with  button.
Reduce the lower width with  button.
Keystone menu
Note:
● The white arrows indicate that there is no correction.
● A red arrow indicates the direction of correction.
● An arrow disappears at the maximum correction.
● Correcting up to ±30° for the tilt in the vertical direction is available for adjustments with "Keystone". However, the image quality will degrade and it will get harder to focus with more correction. Install the projector so that the correction will be as small as possible.
● Screen size will also change when "V Keystone" is used to perform various adjustments.
● Aspect ratio of the image size may shift depending on the correction.
38
Expand
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Factory default
Lamp counter
Logo
This function allows you to customize the screen logo with Logo select, Capture, Logo PIN code lock and Logo PIN code change functions.
Logo Select
This function decides on the starting-up display
Logo
from following options.
Default .... Show the factory-set logo.
User..........Show the image captured by user.
Off ........... Show the countdown display only.
Capture
You can capture a projected image as start logo . Select "Capture" and press the OK button on remote control or control panel.
Conrmation dialog box appears, select "Yes"
to start capturing.
Logo PIN code Lock
This function prevents an unauthorized person from changing the screen logo.
Off ............The screen logo can be changed freely from the Logo menu.
On ............The screen logo cannot be changed without a Logo PIN code.
If you want to change the Logo PIN code lock setting, press the OK button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below.
Press OK button to enter the PIN code. Press ◄► button to select a number, and then press the
OK button to enter this number, the cursor automatically move to next box. If you fixed an incorrect number, press MENU button to reset it again. Repeat this step to complete entering a three-digit number. After entering the three-digit number, the cursor automatically move to "Set", and press the OK button, then you can start to operate the projector. If you entered an incorrect PIN code, the number (***) turn red, it will be reset automatically within one second. Enter the correct PIN code all over again.
Logo PIN code change
You can change the Logo PIN code (three number). Press the OK button to select Logo PIN code change. Logo Pin code dialog box appears, press◄►button to enter the correct PIN code.
The New Logo PIN code input dialog box appears. Set a new Logo PIN code, conrmation box
appears, select Yes to set the new Logo Pin code. Be sure to note the new Logo PIN code and keep it on hand. If you lost the number, you could no longer change the Logo PIN code setting.
CAUTION: WHEN YOU HAVE CHANGED THE LOGO PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE LOGO PIN CODE NO. MEMO ON PAGE 59, AND KEEP IT SECURELY. SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING CAN NO LONGER BE CHANGED.
39
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Factory default
Lamp counter
Expand
Security
Security
This function allows you to use the PIN code lock and PIN code change functions to set the security for the projector operation.
PIN code lock
This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security.
Off .... Unlocked.
On .... Enter the PIN code every time
turning on the projector.If you want to change PIN code lock setting or PIN code,you must enter the PIN code. The default PIN code is "111".
If you want to change the PIN code lock setting, press the OK button, then PIN code dialog box appears.
Press ◄► button to select a number, and then press the OK button to enter this number, the cursor automatically move to next box. If you fixed an incorrect number, press MENU button to reset it again. Repeat this step to complete entering a three-digit number. After entering the three-digit number, the cursor automatically move to "Set", and press the OK button, then you can change the PIN code lock setting. If you entered an incorrect PIN code,the number (***) turn red, it will be reset automatically within one second. Enter the correct PIN code all over again.
PIN code change
The PIN code can be changed to three-digit number. Press  button to select PIN code change. Pin code dialog box appears, Press ◄► button to enter the correct code. The New PIN code input dialog box appears. Set a new PIN code.
CAUTION: WHEN YOU HAVE CHANGED THE LOGO PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE LOGO PIN CODE NO. MEMO ON PAGE 59, AND KEEP IT SECURELY. SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING CAN NO LONGER BE CHANGED.
40
Expand
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Factory default
Lamp counter
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Factory default
Lamp counter
No signal
01 : 20
Power management
For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options:
Ready
When the lamp has been fully cooled down, the POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the remote control or top control is pressed.
Shut down
When the lamp has been fully cooled down, the power will be turned off.
Off
Power management function is off.
Timer
If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with No signal appears. It starts the countdown until the lamp is turned off. Press  button to set the Timer(1~30min.)
Ready countdown
Set the time that ready status transfers to standby status automatically.(0-30min. 0 Min: not transfer automatically)
In ready status, press POWER button to switch to
standby status, and press any other button to turn on the projector.
Filter counter
This function is used to set a frequency for lter
cleaning.
Power management
Time left before Lamp is off.
Note:
Factory default: "Timer: 5 min",
"Ready countdown: 5 min".
Filter counter
When the projector reached a specied time
between cleanings, a Filter warning icon appears on the screen, notifying the cleaning
is necessary. After cleaning the lter, be sure
to select RESET and set the timer. The Filter
warning icon will not turn off until the lter
counter is reset.
Filter counter
Display the using time of the lter.
Timer Set the time to displaythe warning icon.
Filter counter reset
Reset the lter counter.
Filter check
Enable / disable lter check function.
41
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Factory default
Lamp counter
Test Pattern
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Factory default
Lamp counter
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Factory default
Lamp counter
This function is used to set the internal test signal: Gray scale 1, Gray scale 2, Gray scale 3, Gray scale 4, Color bar, Red, Green, Blue, Cross hatch, White, Black and Raster gray.
When you get into the Test Pattern mode, press MENU to get back the selection page of Test Pattern.
Expand
Test Pattern
Factory default
This function returns all setting values except for the User logo, PIN code lock, Logo PIN code lock, Lamp counter and Filter counter to the factory default settings.
Lamp Counter Reset
This function resets the counter of Lamp usage hours.Please be sure to reset the lamp counter after replacing the lamp. WARNING indicator turns Off and the lamp replacement icon disap­pears after reset the lamp counter.
Press < MENU > button on the remote con­troller or on the top control panel to display the OSD menu. Press button to select the
Expand menu, then press <OK> or button
1) Press
button to select [Lamp counter]
menu.
2) Press <OK > button.
3) Press button to select [Lamp counter
reset], then press <OK> button.
4) " Lamp replacement counter reset ? "
conformation box appear.
5) Select "Yes" and Press <OK> button.
42
.
Factory default
Lamp counter
Information
The information menu is used to the detect signal of projected image and running state.
Menu operation
Press MENU button on the remote control or top control to display the screen menu. Press
to select Info., the information menu will

appear as the right picture.
The information below will display in information menu.
Input
The selected input source is displayed.
H-sync freq .
The horizontal frequency of the input signal is displayed in KHz or - - - -KHz when no signal is detected.
V-sync freq .
The vertical frequency of the input signal is displayed in Hz or - - - - Hz when no signal is detected.
Lamp status
The setting status of "Lamp control" is displayed.
info. menu
Info.
Input
H-sync freq.
V-sync freq.
Lamp status
Lamp counter
Power management
Image mode
1024 x 768, 60Hz
Computer 1
48.24 kHz
60.06 Hz
2 H
Ready
5 Min
Standard
Lamp counter
The usage time of the lamp is displayed.
Power management
The setting status of "Power management" is displayed.
Image mode
The setting status of "Image mode" is displayed.
43
Maintenance and cleaning
WARNING indicator
The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator to take proper maintenance.
The projector is shut down and the WARNING
indicator is ashing red.
When the temperature inside the projector exceeds the normal temperature, the projector is automatically shut down to protect internal components. The WARNING indicator is blinking while the projector is being cooled down. When the projector has cooled down enough (to its normal operating temperature), it can be turned on again by pressing the POWER button.
Note:
The WARNING indicator continues to blink even after the temperature inside the projector returns to normal. When the
projector is turned on again, the
WARNING indicator stops blinking.
Check the items below: – Did you provide appropriate space for the projector to be ventilated? Check the installing condition to see if ventilation slots are not blocked. – Has the projector been installed near the duct or vent of an airconditioning? Move the installation of the projector away from the duct or vent.
– Are the air lters clean? Clean the air lters
periodically.
WARNING indicator
WARNING indicator
ashes red.
The projector is shut down and the WARNING indicator lights red. When the projector detects an abnormal condition, it is automatically shut down to protect the internal components and the WARNING indicator lights red. In this case, unplug the AC power cord and plug it, and then turn on the projector once again to verify operation. If the projector cannot be turned on and the WARNING indicator lights red, unplug the AC power cord and contact the service station for servicing and maintenance.
Caution Do not leave the projector with the AC power cord connected under an abnormal condition.
It may result in re or electric shock.
WARNING indicator
WARNING indicator lights red.
44
Maintenance and cleaning
Cleaning the lter
The air lter prevents dust from accumulating on the surface of the optical elements inside the projector. Should the air lter become clogged with dust particles, it will reduce cooling
fans’ effectiveness and may result in a buildup of internal heat and adversely affects the life of
the projector. If the Filter warning icon appears on the screen, the air lter should be cleaned immediately. Clean the air lter following the steps below.
1 Turn off the projector, and unplug the AC power cord from the AC outlet.
2 Remove the air lter.
3 Gently clean the lter with a brush.
4 Reinstall the lter into the projector properly.
Filter
Caution Do not operate the projector with
the air lter removed. Dust may
accumulate on the optical elements, degrading picture quality. Do not put any small objects into the air intake vents. Otherwise, it may result in malfunction of the projector.
Filter counter reset
Be sure to reset the lter counter after cleaning
or replacing the lter.
1. Press Menu on the remote control to display the screen menu. Press to select "Expand", then press the OK button.
2. Press  to select "Filter counter", and then press the OK button. Press  to select "Filter counter reset" and press the OK button, "Filter counter Reset?" appears on screen, select "Yes" to continue.
3. When another dialog box pops up, select
"Yes" to reset the lter.
Recommendation We recommend avoiding dusty/smoky environments when you operate the projector. Usage in these environments may cause poor image quality. When you use the projector under dusty or smoky conditions, dust may accumulate on the lens, LCD panels, or optical elements inside the projector. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning.
45
Maintenance and cleaning
Clean the projector lens
Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that contains non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of lens.
Clean the cabinet
Unplug the AC power cord before cleaning.
Gently wipe the projector surface with a soft dry cleaning cloth. When the cabinet is heavily soiled, use a small amount of mild detergent
and nish with a soft dry cleaning cloth. Avoid
using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the cabinet.
When the projector is not in use, put the projector in a pouch to protect it from dust and scratches.
46
Replace the lamp
Maintenance and cleaning
When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen. Replace the lamp with a new one of the same type promptly. The timing when the lamp replacement icon appears is depending on the lamp mode.
CAUTION
As temperature inside the projector is high, you should cool the projector for at least 45 minutes before you open the lamp cover.
CAUTION
When the lamp isn’t illuminated, it may indicate that the lamp has been damaged. When you replace the lamp in a projector installed on the ceiling, you should stand beside the lamp cover other than under it; for the broken glass may fall down to hurt you. To do that, remove the lamp cover gently to avoid being hurt by falling debris. If debris drops into your eyes or mouth, you should see the doctor immediately.
To replace the lamp, follow the steps below:
1. Power off the projector and unplug the power cord. Then let the projector cool for at least 45 minutes.
Lamp replacement icon
Lamp replacement
CAUTION
For the sake of safety, only use the lamp of the same model. Never drop the lamp onto the ground nor touch the glass bulb! The glass can shatter and hurt.
Screw
2. Loosen the screw on the lamp cover to remove the cover.
3. Make sure the lamp is well protected and remove three screws. Hold the handle to take out the lamp.
4. Install a new lamp with the same model and tighten the four screws. Make sure the installation is correct. Put lamp cover in place and then tighten the screw.
5. Plug the AC power cord and power on the projector.
Handle
Lamp cover
Screw
47
Maintenance and cleaning
Order Replacement lamp
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer.
Replacement Lamp Model No.: 23040052
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly.
Improper handling may result in accidents, injury, or create a re hazard.
● Lamp life may differ from lamp to lamp and according to the environment of use. There is no
guarantee of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamps.
● If the projector indicates that the lamp should be replaced, i.e., if the
(Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the WARNING indicator lighted may increase the risk of lamp explosion.
● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its
lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.
, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.
appears
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN .
the Lamp replacement icon
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.
48
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
- Make sure you have properly connected the projector to peripheral equipment.
- Make sure all equipment is connected to the AC outlet and the power is turned on.
- If the projector does not project an image when it is connected to a PC, restart the PC.
Problems – Solutions
No power - Plug the power cord of the projector into the AC power outlet.
No initial displaying - Make sure that Logo function is not set to "Off". (Page 39)
Initial displaying is inconsistent with factory defaults Input signals are automatically switched (can’t be switched)
Ambiguous images - Adjust the focus.
Image turns over leftward/ rightward Image turns over upward/ downward Image not bright enough - Check whether the contrast or brightness is adjusted correctly.
- Check whether the POWER indicator lights red.
- Only when the POWER indicator lights red you can power on the projector again.
- Check the WARNING indicator. If it is blinking red, the projector can not be powered on. (Page 54)
- Check the projection lamp.
- Unlock the “Key lock” function. (Page 35)
- Make sure that Logo function is not set to "Off" or "User". (Page 39)
- Properly adjust the Input search function.
- Set a more proper projection distance.
- Check whether the lens needs to be cleaned.
- When moved from a environment with low temperature to the one with higher temperature, water will be condensed on the lens. If so, you have to wait till the condensed water disappears.
- Check the function of “Ceiling/rear”. (Page 27)
- Check the function of “Ceiling”.(Page 27)
(Page 31-32)
- Check whether the Image mode is properly selected. (Page 30)
- Check the function of lamp brightness adjusting. (Page 34)
No image - Check the connection between Computer or video equipment and
the projector.
- Check whether the signal from Computer is correct. If connected to certain laptops, the settings of their video adapters need to be changed. You can refer to the operating instructions of the Computer
for such modication.
- Images can show up only about 20 seconds after the projector is powered on.
- Check the input signal, color system, video system or Computer system mode.
- Make sure that the temperature doesn’t exceed the permitted
operating temperature(41˚F-104˚F [5˚C - 40˚C] ).
- If BLANK function is enabled, no image will appear on the screen. You can then press the BLANK button or other button on the remote control.
49
Appendix
The color is abnormal - Check the input signal, color system, video system or computer
Auto PC adj. function does not work.
The Settings cannot be saved after turing off the projector.
Power management function does not work. Logo function does not work. - Check connections and input source.
Auto setup function does not work. - Make sure no function in the Auto setup menu is set to “Off”.
The image is distorted or disappears. PIN code dialog box appears at start-up The remote control does not work. - Check the batteries.
Indicators light or ash. - Refer to Indicators and projector condition to check the status of
Exclamatory mark appears on the screen. Top control cannot be operated. - Unlock the Key lock in Setting -> Key lock.
Unable to unlock the Logo PIN code, Key lock or PIN code lock.
system mode.
- Make sure that Blackboard is not selected in Image Mode menu.
- Check the Input signal. Auto PC adj. function can not work when 480p, 576p, 720p, 480i, 576i, 1080i or 1080p is selected.
- Make sure you have selected “store” after you changed the settings. Some settings can’t be saved if “ store” is not selected.
- Power management function can not work while Freeze or Blank function is running.
- Make sure “On” is not chosen in the Ceiling function.
- Check and adjust “ Screen” menu.
- PIN code lock is being set.
- Make sure no obstruction is between the projector and the remote control.
- Make sure you are not too far from the projector when using the remote control. Maximum operating range is 5 m.
- Unlock the Key lock function in the Setting menu for the remote control.
the projector.
- Your operation is invalid. Operate correctly.
- Contact the dealer or the service center.
Warning:
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.
50
Appendix
Menu Tree
Main menu Sub menu Setting Note
Auto PC adj.
Fine sync 0 to 31
H Position -5 to +5
V Position -5 to +5
In different signal, H.Size range will different
Component input
S-video Input Video Input
Display
Color adjust
H.Size -15 to +15
Normal
Aspect
Projection
Menu positon
Background display
System
Image mode
Wide Full Advanced (PC input only)
Front Rear Ceiling/Front Ceiling/Rear
Upper left Upper right Center Lower left Lower right
Black Blue
Auto 1080p 1080i 1035i 720p 575p 575i 480p 480i
Auto PAL SECAM NTSC NTSC4.43 PAL-M PAL-N PAL60
Dynamic Standard Cinema Blackboard(Green) Colorboard User Image
51
Appendix
Main menu Sub menu Setting Note
Contrast 0-63 Brightness 0-63 Color temp. High/Mid/Low
Color adjust
Setting
Red 0-63 Green 0-63 Blue 0-63 Sharpness 0-15 Contrast 0-63 Brightness 0-63 Color 0-63 Tint 0-63 Red 0-63 Green 0-63 Blue 0-63 Sharpness 0-15 On start On/Off Standby mode Normal/Eco High land On/Off Lamp control Normal/Eco Cooling fast Normal/60 sec/0 sec Closed caption Off, CC1,CC2,CC3, CC4 Key lock Off, Projector, Remote control
HDMI setup
64-940
0-1023
Computer input
Component Input S-video Input Video Input
Expand Language
52
English, German, French, Italian, Spanish, Polish, Swedish, Dutch, Portugese,
Japanese, Simplied Chinese,
Traditional Chinese, Korea, Russian, Arabic, Turkish, Finnish, Norwegian, Danish, Indonesian, Hungarian, Czech, Kazak, Vietnamese, Thai, Farsi
26 Languages
Appendix
Main menu Sub menu Setting Note
Input search On/Off
Auto PC adj. On/Off
Logo select Default/User/Off
Capture
Logo PIN code lock On/Off
Logo PIN code change
PIN code lock On/Off
PIN code change
Ready Shut down Off Timer Ready countdown
Filter counter Timer Filter counter reset Filter check
Off,Gray scale1(1-4), Colorbar, Red, Green, Blue, Cross hatch, White, Black, Raster gray
Lamp counter Lamp counter reset
Expand
Info.
Auto setup
Keystone Keystone Store/Reset
Logo
Security
Power management
Filter counter
Test Pattern
Factory default
Lamp counter
Input
H-sync freq.
V-sync freq.
Lamp status
Lamp counter
Power management
Image mode
Input
VGA
HDMI
Component
Video
S-video
53
Appendix
Indicator and projector state
Check the indicator to know about the state of projector.
Indicator
WARNING
(Red)
POWER
(Green/Red/
Yellow)
Your projector is in Off status (without AC power supply).
Your projector is in standby status. Press Standby button to turn it on.
Your projector is in normal status.
It is ready for standby or the lamp is cooling. You may power on your projector
only after the lamp is fully cooled and the POWER light indicator stops ashing.
Your projector is in Ready mode.
Your projector cannot power on, as its internal temperature is too high. You may power it on after it is fully cooled, temperature backs to normal, and the POWER light indicator turns red.
Your projector detects lamp abnormality and switches into standby mode.
Your projector detects the temperature abnormality and switches into standby mode.
State of projector
Your projector detects power abnormality.
Your projector detects fan abnormality.
Your projector detects its usage time ≥ the life of the projector -300H when the
projector usage time <1.1 times the life of the projector.
Your projector detects its usage time ≥ 1.1times the life of the projector.
Green Red
Flash green
Flash red
Yellow
Flash Yellow
Off
* When the lamp reaches the end of its life, the LAMP indicator lights Yellow. In this case, replace the lamp with a new one promptly.
54
Appendix
Compatible computer specications
Your projector is designed to accept every analog computer signal below Dot Clock 160MHz and digital computer signal below Dot Clock 150MHz. See table below for details on resolution and relevant frequency.:
Input
VGA
Component
Signal format
VGA
SVGA
MAC 16 832x624 75
XGA
MXGA 1152x864 75
WXGA
QVGA
SXGA
SXGA+
UXGA 1600x1200 60
WSXGA+ 1680x1050 60
WUXGA 1920X1200 60
483p 720x483p 60
576p 720x576p 50
720p 1280x720 50
720p 1280x720 60
1080i 1920x1080i 50
1080i 1920X1080i 60
Resolution
640x480 60
640x480 68
640x480 72
640x480 75
640x480 85
800x600 56
800x600 60
800x600 72
800x600 75
800x600 85
1024x768 60
1024x768 70
1024x768 75
1024x768 85
1280x768 60
1280x768 75
1280x768 85
1280x800 60
1280x800 75
1280x800 85
1366x768 60
1280x960 60
1280x960 85
1280x1024 60
1280x1024 75
1280x1024 85
1400x1050 60
1400x1050 75
480i 720x480i 60
576i 720x576i 50
Frequency
(Hz)
Input
HDMI
Video/S-video
Signal format
SVGA
MAC 16 832x624 75
XGA+ 1152x864 75
WXGA
QVGA
SXGA
SXGA+
UXGA 1600x1200 60
WSXGA+ 1680x1050 60
WUSGA
NTSC NTSC -
SECAM SECAM -
NTSC4.43 NTSC4.43 -
PAL-M PAL-M -
PAL-N PAL-N -
PAL-60 PAL-60 -
Resolution
640x480 60
640x480 68
VGA
XGA
PAL PAL -
640x480 72
640x480 75
640x480 85
800x600 56
800x600 60
800x600 72
800x600 75
800x600 85
1024x768 60
1024x768 70
1024x768 75
1024x768 85
1280x768 60
1280x768 75
1280x768 85
1280x800 60
1280x800 75
1280x800 85
1366x768 60
1280x960 60
1280x960 85
1280x1024 60
1280x1024 75
1280x1024 85
1400x1050 60
1400x1050 75
1024x768 1280x800
Frequency
(Hz)
60
55
Appendix
Technical Specications
LCD system 0.63" TFT, active matrix, 3-panel
LCD resolution 1024X768
Compatible signals
Color standard PAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N and PAL60
HDTV signal 480i, 480p, 576i, 576p, 720p, 1080i and 1080p
Scanning frequency Horizontal frequency: 15 –100 KHz; Vertical frequency: 48 – 85 Hz
Optical elements
Image size (diagonal lines)
Projection distance
Lens
Lamp Consumption(W) 218W
Terminal
VGA IN/YPbPr/S-VIDEO IN Mini D-sub 15 pin x1
VGA OUT Mini D-sub 15 pin x1
HDMI HDMI x1
RS-232 D-sub 9 pin x1
Composit Video RCA x1
Power
Voltage and power consumption AC 100–240 V, 50/60 Hz / 180 W (Eco), 270 W (Normal) Fuse 250V/10A
Operating Environment
Operating temperature 41˚F-104˚F (5˚C - 40˚C)
Storage Temperature -4˚F-140˚F (-20˚C - 60˚C) High land 1400 m - 2700 m
Remote control
Battery AAA or LR3 1.5V ALKALINE TYPE x 2 Operating Range 16.4' (5 m)/±30 Dimensions 50mm (W) x 18mm (H) x 110mm (D) Net Weight 50g (including batteries)
Mechanical properties Dimensions (W×H×D ) 347.0mmx109.0mmx257.0mm(Not including protrusion)
Net Weight 3.2Kg Adjustable foot 40mm
Accessories
30"-300"
0.9m-9.1m(W) 1.1m-10.9m(T)
F=1.6-1.76, f=19.158-23.018mm; Manual zooming and focusing;
Zoom Ratio: 1.2x optics
AC Power Cord, Remote Control & battery, VGA Cable Quick Start Guide, Safety Information
● The specication is subject to change without prior notice.
● Liquid crystal panel is made on the basis of high standard, where 99.99% of the pixels are effective. Due to the nature of the liquid crystal panel, a fraction of the pixels (0.01% or less) may be ineffective.
56
Congurations of terminals
VGA IN
terminal pin assignments and signal names
15141312
11
109876
54321
Note:
The Pin 1, 2 and 3 (Pr, Y, Pb): for YCbCr/YPbPr signal. The Pin 1 and 2 (S-C, S-Y): for S-Video signal.
VGA OUT
RS232 terminal (D-SUB-9 pin)
terminal pin assignments and signal names
1 R 9 NC
2 G 10 GND
11
6
7 8 9
1 2 3 4 5
15141312
109876
54321
3 B 11 -----
4 ----- 12 DDC data
5 GND 13 HD/SYNC
6 GND 14 VD
7 GND 15 DDC clock
8 GND
1 -----
2 RXD
3 TXD
4 -----
5 GND
6 -----
7 -----
8 -----
9 -----
Appendix
1 R/Pr/S-C 9 +5V
2 G/Y/S-Y 10 GND
3 B/Pb/- 11 GND
4 ----- 12 DDC data
5 GND 13 HD/SYNC
6 GND 14 VD
7 GND 15 DDC clock
8 GND
HDMI terminal pin assignments and signal names
1 T.M.D.S data2+ 11 T.M.D.S clock shield
2
1
3 5 7 9
864
12
10
11 13 15 17
1614
18
19
2 T.M.D.S data2 shield 12 T.M.D.S clock–
3 T.M.D.S data2– 13 CEC
4 T.M.D.S data1+ 14 -----
5 T.M.D.S data1 shield 15 SCL
6 T.M.D.S data1– 16 SDA
7 T.M.D.S data0+ 17 DDC/CEC GND
8 T.M.D.S data0 shield 18 +5V
9 T.M.D.S data0– 19 Hot plug detection
10 T.M.D.S clock+
57
Appendix
5-M4X10mm
Content of hazardous substances and elements
Name of parts
Optical parts Electric parts
*
**
Cabinet, mechanical parts Lamp unit Batteries Others(Remote control, cable and other parts) Package
Pb Hg Cd Cr6+ PBB PBDE
  
Hazardous substances and elements
○ ○
This table is formulated in accordance with SJ/T 11364.
○: It means that contents of hazardous substances in all homogeneous materials in this part don’t exceed "Required Limitations" specied in GB/T26572.
×: It means that contents of hazardous substances in at least one homogeneous material in this part
exceed "Required Limitations" specied in GB/T26572.
Note:
* :
Optical parts includes optical lens, monitor, reection lens ect.
** :
Electric parts includes PCB, internal wires, fans, power supply, sensors etc.
Dimensions
110.3
67.2
103.5
109.0
Screw Holes for Ceiling Mount Screw: M4 Depth: 10.0
Unit: mm
58
257.0
347.0
187.5
190.5
110.0
277.5
298.5
Appendix
PIN code memorandum
Write down the PIN code in the blank below and keep it, If you forgot or lost the number and unable to operate the projector, contact the service center.
Factory default PIN code 111*
PIN code lock
Factory default PIN code 111*
Logo PIN code Lock No.
*If this 3-digit number is changed, the factory default number will be ineffective.
59
U.S.A.
EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132, U.S.A. Tel: +1 800-242-3454
+1 949-457-0200
Fax: +1 800-457-3454
+1 949-457-7878
E-Mail: usa@eiki.com
Canada
EIKI CANADA Eiki International, Inc. Canadian Branch 9170 County Road 93, Suite 304, Midland, ON, L4R 4K4, Canada Tel: +1 800-563-3454
+1 705-527-4084
E-Mail: canada@eiki.com
Deutschland & Österreich
EIKI Deutschland GmbH Am Frauwald 12 65510 Idstein, Deutschland Tel: +49 6126-9371-0 Fax: +49 6126-9371-11 E-Mail: info@eiki.de
China
EIKI (Shanghai) Co., Ltd. LAKESIDE OASIS MIDDLE RING BUSINESS CENTRE Block 1,Room 606, 1628, Jin Sha Jiang Road Shanghai, 200333, CHINA China Tel: +86 21-3251-3993 Service Hot line: +86 21-3251-3995 Fax: +86 21-3251-3997 E-mail: info@eiki-china.com
Oceania
EIKI AUSTRALIA PTY LTD Level 5, 11 Queens Road, Melbourne, Victoria 3004, Australia Tel: +61 03-8530-7048 Fax: +61 03-9820-5834 E-Mail: sales@eiki.net.au
Eastern Europe
EIKI CZECH SPOL. s.r.o. Nad Cementárnou 1163/4a Praha 4, Podolí, 147 00 Czech Republic Tel: +420 241-410-928
+420 241-403-095 Fax: +420 241-409-435 E-Mail: info@eiki.cz
South East Asia
EIKI Industrial (M) Sdn Bhd No. 11, Nouvelle Industrial Park, Lorong Teknologi B, Taman Sains Selangor 1, Kota Damansara PJU5, 47810 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60 3-6157-9330 Fax: +60 3-6157-1320 E-Mail: sales@eiki.my
Japan & Worldwide
EIKI Industrial Company Limited. 6-23 Teramoto, Itami-shi, Hyogo, 664-0026, Japan Tel: +81 72-782-7492 Fax: +81 72-781-5435
World Wide Website http://www.eiki.com
Loading...