Page 1
Owner's Manual
Multimedia Projector
Model
EIP-X5500
EIP-W4600
EIP-U4700
Page 2
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and
ease of use. This projector utilizes a high luminance and Eco friendly system, a palette of 1.07 billion
colors, and digital light processing (DLP) technology
Compact Design
This projector is designed compact in size and
weight. It is easy to carry and installed
anywhere you wish to use.
Simple Computer System Setting
The projector has the Multi-scan system to
conform to almost all computer output signals
quickly. Up to UXGA resolution can be accepted.
Useful Functions for Presentations
- The digital zoom function allows you to focus
on the crucial information during a
presentation .
- The 3W audio output allows you to make a
presentation without any extenal audio
equipment.
Lamp Control
Brightness of the projection lamp can be
manually selected (Normal or Static Eco).
If a Dynamic Eco is chosen, the system will
automatically adjust the lamp power according
to the source input. This enhances the picture
contrast and reduces the power consumption
especially in dark screen.
Logo Function
The Logo function allows you to customize the
screen logo. You can capture an image for the
screen logo and use it for the starting-up display
or between presentations.
Helpful Maintenance Functions
Lamp and filter maintenance functions provide
for better and proper maintenance of the
projector.
Security Function
The Security function helps you to ensure
security of the projector. With the Key lock
function, you can lock the operation on the top
control or remote control except the Power
button.
LAN Network Function
This projector is loaded with the Wired LAN
network function. You can operate and manage
the projector via network.
For details, refer to the pages 36-45.
Auto Setup Function
This function enables auto input search and
auto signal adjustment simply by pressing the
AUTO button on the keypad or remote.
Colorboard Function
At the time of simple projection on the colored
wall, you can get the close color image to the
color image projected on a white screen by
selecting the similar color to the wall color from
the preset four colors.
Power Management
Multilanguage Menu Display
Operation menu is available in 10 languages;
English, French, German, Spanish, Simplified
Chinese, Traditional Chinese, Russian, Korean,
Arabic and Kazak.
The Power management function reduces
power consumption and maintains the lamp life.
Closed Caption
This is a printed version of the program sound
or other information displayed on the screen.
You can turn on the feature and switch the
channels.
Note:
The screen menu and pictures in the manual may slightly differ from the real product.
The manual is subject to change without prior notice
— i —
Page 3
DLP Projector—Owner’s Manual
Copyright
This publication, including all photographs, illustrations and software, is protected under international
copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may
be reproduced without written consent of the author.
© Copyright 2013
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no
representations or warranties with respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
Trademark Recognition
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations
and pending applications in other countries throughout the world.
All other pro
acknowledged.
duct names used in this manual are the properties of their respective owners and are
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
— ii —
Page 4
Important Safety Information
Important:
It is strongly recommended that you read this section carefully before using the projector. These
safety and usage instructions will ensure that you enjoy many years of safe use of the projector.
Keep this manual for future reference.
Symbols Used
Warning symbols are used on the unit and in this manual to alert you of hazardous situations.
The following styles are used in this manual to alert you to important information.
Note:
Provides additional information on the topic at hand.
Important:
Provides additional information that should not be overlooked.
Preface
Caution:
Alerts you to situations that may damage the unit.
Warning:
Alerts you to situations that may damage the unit, create a hazardous environment, or cause
personal injury.
Throughout this manual, component parts and items in the OSD menus are denoted in bold font as in this
example:
“Push the Menu button on the remote control to open the Main menu.”
General Safety Information
Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts in
the unit. For servicing, contact qualified service personnel.
Follow all warnings and cautions in this manual and on the unit case.
The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into the
lens when the lamp is on.
Do not place the unit on an unstable surface, cart, or stand.
Avoid using the system near water, in direct sunlight, or near a heating device.
Do not place heavy objects such as books or bags on the unit.
–iii –
Page 5
DLP Projector—Owner’s Manual
Safety Instructions
Please read this manual completely before installing and operating the projector.
The projector provides many convenient features and functions. Proper operation may enable you to fully
utilize the features and keep it in good condition. Otherwise, it will not only shorten the service life of the
unit, but also may cause malfunction, a fire, or other accidents.
If your projector cannot work properly, please read this manual again, check the operating methods and
cable connection, and try the solutions in the part of Troubleshooting. If the problem still exists, contact the
dealer or the service center.
The lamp of the projector is a wearing part. The luminance may decrease after a period of operation and
be weaker than that of a new lamp. This is normal. Please strictly follow the steps in Turning on the unit
and Turning off the unit to turn on/off the projector, and the requirements in maintaining and cleaning the
projector to service and clean the projector regularly. Or the high temperature residual heat may not
radiate, greatly shortening the service life of the projector and lamp, or even damaging them within a short
period.
Caution:
ELECTRIC SHOCK DO NOT OPEN
Caution:
To reduce the risk of electric shock, do not remove cover (or back), no user serviceable
parts inside except lamp replacement. refer servicing to qualified service personnel.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present
within this unit.
This symbol indicates that there are important operating and maintenance instructions in the
user’s manual with this unit.
FOR EU USERS
The symbol mark and recycling systems described below apply to EU countries and do not
apply to countries in other areas of the world.
Your product is designed and manufactured with high quality materials and components which
can be recycled and/or reused.
The symbol mark means that electrical and electronic equipment, batteries and accumulators,
at their end-of-life, should be disposed of separately from your household waste.
Note:
If a chemical symbol is printed beneath the symbol mark, this chemical symbol means that the
battery or accumulator contains a heavy metal at a certain concentration. This will
be indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead In the European Union
there are separate collection systems for used electrical and electronic equipment,
batteries and accumulators.
Please, dispose of them correctly at your local community waste collection/recycling
centre. Please help us to conserve the environment we live in!
— iv —
Page 6
Preface
Safety precautions
Caution:
The projector must be grounded.
Do not expose the projector to raindrops or high humidity to avoid a fire or electric shock.
- This projector produces intense light from the projection lens. Avoid staring directly into the lens,
otherwise eye damage could be caused. Be especially careful that children do not stare directly into the
beam.
- Place the projector in a proper position. Otherwise it may result in fire hazard.
- Leave an appropriate space from the top, sides, and back of the shell in order to ventilate and cool down
the projector. The figures below indicate the minimum distance to be left. It must be satisfied if the
projector is placed in sealed environment like a cabinet.
- Do not cover the vent of the projector. Poor radiation may shorten the service life or even cause dangers.
- Remove the AC power plug if the projector is not to be used for a long time.
Caution
Do not set the projector in greasy, wet, or smoky conditions such as in a kitchen, to prevent a
malfunction or accident. If the projector comes in contact with oil or chemicals, it may become
deteriorated.
Read and keep this manual for future reference.
The mains plug/appliance coupler is used as disconnect device, the disconnect device shall
remain readily operable.
–v –
Page 7
DLP Projector—Owner’s Manual
Safety Guide
All the safety and operating instructions should be read before the product is operated.
Read all of the instructions given here and retain them for later use. Unplug this projector from AC power
supply before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power
line surges.
Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming pool,
etc...
Do not use attachments not recommended by the manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious
injury to a child or an adult, and serious damage to the projector.
Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf
mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the
manufacturers.
An appliance and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance and cart combination to overturn.
Slots and openings in the back and bottom of the cabinet are provided for ventilation, to ensure reliable
operation of the equipment and to protect it from overheating.
The openings should never be covered with cloth or other materials, and the bottom opening should not be
blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never
be placed near or over a radiator or heat register.
This projector should not be placed in a build-in installation such as a book case unless proper ventilation
is provided.
Never push objects of any kind into this projector through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on
the projector.
Do not install the projector near the ventilation duct of air-conditioning equipment.
This projector should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of power supplied, consult your authorized dealer or local power company.
Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow
anything to rest on the power cord. Do not locate this projector where the cord may be damaged by
persons walking on it.
Do not attempt to service this projector yourself as opening or removing Covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
- Unplug this projector from wall outlet and refer servicing to qualified service personnel under the
following conditions:
When the power cord or plug is damaged or frayed.
- If liquid has been spilled into the projector.
— vi —
Page 8
- If the projector has been exposed to rain or water.
- If the projector does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the projector to
normal operation.
- If the projector has been dropped or the cabinet has been damaged.
- When the projector exhibits a distinct change in performance - this indicates a need for service.
When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or injury to persons.
Upon completion of any service or repairs to this projector, ask the service technician to perform routine
safety checks to determine that the projector is in safe operating condition.
Information for users in the European Union
This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a
domestic environment. Directive 2009/125/EC.
Note for customers in the us
Preface
Hg
Lamp(s) inside this product contain mercury and must be recycled or disposed of according to
local state or federal laws.
Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local state
or federal laws.
Air circulation
Vents in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect
it from overheating, these openings must not be blocked or covered.
Caution
- Hot air is exhausted from the exhaust vent. When using or installing the projector, the
following precautions should be taken.
- Do not put any flammable objects, or spray can near the projector. Hot air is exhausted from
the air vents.
- Keep the exhaust vent at least 1m away from any objects.
- Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This
area will become hot while the projector is being used.
- Do not put anything on the projector. Objects put on the cabinet will not only get damaged
but also may cause fire hazard by heat.
- Cooling fans are provided to cool down the projector.
- The fan’s running speed is changed according to the temperature inside the projector.
–vii –
Page 9
DLP Projector—Owner’s Manual
Moving the projector
When moving the projector, take care of the lens and retract the adjustable foot to prevent damage to the
lens and cabinet.
Installing the projector properly
Please set the projector on nearly-level.
Be sure to install the projector properly. Improper installation may reduce the lamp lifetime and even cause
a fire hazard.
15
15
Do not roll the projector over 15 degrees from rear to front.
Do not point the projector up to
Do not point the projector down to
project an image.
project an image.
Do not put the projector on either side to project an image.
Caution in ceiling installation the projector
- Only qualified personal is authorized for ceiling installation.
- We are not responsible for the hurt and damage caused by ceiling brakect that purchased
from unauthorized dealer even in warranty period.
- Remove the ceiling bracket immediately while not use.
- While installing, torque screwdriver is suggested, don't use electric or impact-type
screwdriver.
- Please read the manual of bracket for details.
- The bracket is subject to change without notice.
— viii —
Page 10
Preface
Caution in moving or transporting the projector
- Do not drop or bump the projector, otherwise damages or malfunctions may result.
- When carrying the projector, use a suitable carrying case.
- Do not transport the projector by courier or any other transport service in an unsuitable
transport case. This may cause damage to the projector. For information about transporting
the projector by courier or any other transport service, consult your dealer.
- Do not put the projector in a case before it is cooled enough.
–ix
–
Page 11
DLP Projector—Owner’s Manual
Compliance
FCC Caution
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions.
If such changes or modifications should be made, you could be required to stop operation of the
equipment.
Model Number : _EIP-X5500, EIP-W4600, EIP-U4700
Trade Name : EIKI
Responsible party : EIKI International,Inc.
Address : 30251 Esperanza Rancho Santa Margarita CA 92688-2132
Telephone No. : 800-242-3454 (949-457-0200)
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you
purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and
certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit
into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into
the outlet, contact your electrician.
AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the
pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used
of the same rating, marked thus ASA . If the fuse cover is detachable, never use the plug with the cover
omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin
face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your
User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed. The end of the
flexible cord should be suitably prepared and the correct plug fitted.
WARNING :
A plug with bared flexible cord is hazardous if engaged in a live socket outlet.
— x —
Page 12
Preface
The Wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow......... Earth
Blue .............................. Neutral
Brown........................... Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured
markings identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is
marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or
coloured red.
WARNING:
This apparatus must be earthed.
The socket-outlet should be installed near the equipment and easily accessible.
–xi –
Page 13
DLP Projector—Owner’s Manual
Table of Contents
GETTING STARTED........................................................................................................................................................... 1
PACKING CHECKLIST ........................................................................................................................................................... 1
VIEWS OF PROJECTOR PARTS............................................................................................................................................... 2
Front-right View ............................................................................................................................................................ 2
Top view—On-screen Display (OSD) buttons and LEDs....................................................................................... 3
Rear view....................................................................................................................................................................... 4
Bottom view................................................................................................................................................................... 6
REMOTE CONTROL PARTS ................................................................................................................................................... 7
REMOTE CONTROL OPERATING RANGE ............................................................................................................................... 9
PROJECTOR AND REMOTE CONTROL BUTTONS.................................................................................................................... 9
INSERTING THE REMOTE CONTROL BATTERIES ................................................................................................................. 10
SETUP AND OPERATION............................................................................................................................................... 11
STARTING AND SHUTTING DOWN THE PROJECTOR............................................................................................................. 11
SETTING AN ACCESS PASSWORD (SECURITY LOCK) .......................................................................................................... 13
ADJUSTING THE PROJECTOR LEVEL ................................................................................................................................... 15
ADJUSTING THE ZOOM, FOCUS AND KEYSTONE ................................................................................................................ 16
ADJUSTING THE VOLUME .................................................................................................................................................. 17
ON-SCREEN DISPLAY (OSD) MENU SETTINGS ...................................................................................................... 18
OSD MENU CONTROLS ..................................................................................................................................................... 18
Navigating the OSD ................................................................................................................................................... 18
SETTING THE OSD LANGUAGE .......................................................................................................................................... 19
OSD MENU OVERVIEW ..................................................................................................................................................... 20
IMAGE MENU..................................................................................................................................................................... 23
Computer Menu.......................................................................................................................................................... 24
Advanced Feature...................................................................................................................................................... 25
Color Manager ............................................................................................................................................................ 26
SETTINGS 1 MENU ............................................................................................................................................................. 27
Audio ............................................................................................................................................................................ 28
Advanced 1 Feature................................................................................................................................................... 29
Advanced 2 Feature................................................................................................................................................... 31
SETTINGS 2 MENU ............................................................................................................................................................. 32
Status ........................................................................................................................................................................... 33
Advanced 1 Feature................................................................................................................................................... 34
Advanced 2 Feature................................................................................................................................................... 46
MAINTENANCE AND SECURITY.................................................................................................................................. 48
REPLACING THE PROJECTION LAMP................................................................................................................................... 48
Resetting the Lamp.................................................................................................................................................... 50
CLEANING THE PROJECTOR................................................................................................................................................ 51
Cleaning the Lens ...................................................................................................................................................... 51
Cleaning the Case...................................................................................................................................................... 51
USING THE KENSINGTON
®
LOCK & USING THE SECURITY BAR......................................................................................... 52
Using the Kensington® Lock ..................................................................................................................................... 52
Using the Security Bar............................................................................................................................................... 52
TROUBLESHOOTING...................................................................................................................................................... 53
COMMON PROBLEMS AND SOLUTIONS ............................................................................................................................... 53
TIPS FOR TROUBLESHOOTING ............................................................................................................................................ 53
LED ERROR MESSAGES..................................................................................................................................................... 54
IMAGE PROBLEMS.............................................................................................................................................................. 54
LAMP PROBLEMS ............................................................................................................................................................... 55
REMOTE CONTROL PROBLEMS .......................................................................................................................................... 55
AUDIO PROBLEMS ............................................................................................................................................................. 56
HAVING THE PROJECTOR SERVICED .................................................................................................................................. 56
HDMI Q & A .................................................................................................................................................................... 57
— xii —
Page 14
Preface
SPECIFICATIONS............................................................................................................................................................. 58
SPECIFICATIONS................................................................................................................................................................. 58
PROJECTION DISTANCE VS. PROJECTION SIZE.................................................................................................................... 59
Projection Distance and Size Table......................................................................................................................... 59
TIMING MODE TABLE ........................................................................................................................................................ 61
PROJECTOR DIMENSIONS ................................................................................................................................................... 63
REGULATORY COMPLIANCE....................................................................................................................................... 64
FCC WARNING .................................................................................................................................................................. 64
CANADA ............................................................................................................................................................................ 64
–xiii –
Page 15
DLP Projector—Owner’s Manual
GETTING STARTED
Packing Checklist
Carefully unpack the projector and check that the following items are included:
DLP PROJECTOR AND LENS CAP
EMOTE CONTROL
R
WITH TWO AAA BATTERIES)
(
RGB
CABLE POWER CORD
C
ARRYING CASE CD-ROM
HIS USER’S MANUAL)
(T
Q
UICK START GUIDE
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It
is recommend that you keep the original packing material should you ever need to return the equipment
for warranty service.
Caution:
Avoid using the projector in dusty environments.
– 1 –
Page 16
DLP Projector—Owner’s Manual
Views of Projector Parts
Front-right View
1 2
3
5
4
6
7
ITEM LABEL DESCRIPTION SEE PAGE
1.
Height-adjuster button Push to release height adjuster
15
2.
3.
4.
5.
Height adjuster Adjusts level of projector
Lens Projection Lens
IR receiver Receive IR signal from remote control
Focus ring Focuses the projected image
7
16
6.
7.
Important:
Ventilation openings on the projector allow for good air circulation, which keeps the projector lamp
cool. Do not obstruct any of the ventilation openings.
Zoom ring Enlarges the projected image
Function keys
See Top view—On-screen Display (OSD) buttons and LEDs.
3
— 2 —
Page 17
DLP Projector—Owner’s Manual
Top view—On-screen Display (OSD) buttons and LEDs
1
9
8
7
12
2
3
4
5
6
10
11
ITEM LABEL DESCRIPTION SEE PAGE
1.
2.
3.
▲ (Up cursor) /
Keystone+
► (Right cursor) /
Volume+
▼ (Down cursor) /
Keystone-
Navigates and changes settings in the OSD
Quick Menu – For Keystone
Navigates and changes settings in the OSD
Quick Menu – For Volume
Navigates and changes settings in the OSD
Quick Menu – For Keystone
18
4.
5.
6.
7.
8.
9.
10.
11.
12.
MENU Opens and exits OSD menus
Enter Enter or confirm highlighted OSD menu item
(Power button)
SOURCE Enter the Source menu
AUTO Optimizes image size, position, and resolution
◄ (Left cursor) /
Volume-
LAMP LED Flashing Error code
POWER LED
TEMP LED Red Over Temperature
Turns the projector On or Off.
Navigates and changes settings in the OSD
Quick Menu – For Volume
Blue Lamp Ready, Start, Cooling
Flashing Error code
– 3 –
11
18
54
Page 18
DLP Projector—Owner’s Manual
Rear view
1 2
3
5
4
6 7 8 9 10
18
17
16
14
15
11 12
13
A
ITEM LABEL DESCRIPTION SEE PAGE
1.
2.
3.
AC IN Connect the POWER cable
(USB)
VGA OUT
Connect the USB cable from a computer
Connect the RGB cable to a display
(Loop Thru only for VGA IN-1)
11
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
LAN Connect a LAN cable from Ethernet
VGA IN 1 Connect the RGB cable from a computer or component device
VGA IN 2 Connect the RGB cable from a computer or component device
DP Connect a DISPLAYPORT CABLE from a DISPLAYPORT device
AUDIO IN Connect an AUDIO cable from audio device
HDMI 1 / 2 Connect the HDMI cable from a HDMI device
3D SYNC
DC 12V TRIGGER
Speaker Outputs audio sound
Kensington Lock
VIDEO IN Connect the COMPOSITE cable from a video device
AUDIO IN (L and R) Connect the AUDIO cable from a audio device
Connect the 3D IR glasses transmitter
(Note: For Specific 3D IR glasses only)
When connected to the screen through a commercially available cable,
the screen deploys automatically on start up of the projector. The screen
retracts when the projector is powered off (see notes below).
Secure to permanent object with a Kensington® Lock
system
52
16.
17.
18.
S-VIDEO IN Connect the S-Video cable from a video device
RS-232C Connect RS-232 serial port cable for remote control
AUDIO OUT Connect an AUDIO cable to audio amplifier
— 4 —
Page 19
DLP Projector—Owner’s Manual
Note:
To use this feature, you must plug in the connector before turn on/off the projector.
Screen controllers are supplied and supported by screen manufacturers.
Do not use this jack for anything other than intended use.
Note:
If your video equipment has both S-VIDEO and RCA jacks (composite video) connect to the
S-VIDEO connector. S-VIDEO provides a better quality signal.
Warning:
As a safety precaution, disconnect all power to the projector and connecting devices before making
connections.
– 5 –
Page 20
DLP Projector—Owner’s Manual
Bottom view
1 2
3
4 2
ITEM LABEL DESCRIPTION SEE PAGE
1.
2.
3.
4.
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw
depth of 6 mm (0.23 inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount
load capacity must exceed the weight of the installed equipment, and as an additional precaution
be capable of withstanding three times the weight of the equipment (not less than 5.15 kg) over a
period of 60 seconds.
Tilt adjustor Rotate adjuster lever to adjust angle position.
Ceiling support holes
Height adjustor
Height adjustor button Push to release adjustor.
Contact your dealer for information on mounting the projector on a
ceiling
Adjuster drops down when adjuster button is
pushed.
15
15
— 6 —
Page 21
Remote Control Parts
DLP Projector—Owner’s Manual
28
27
26
25
24
23
22
21
20
19
18
17
1
2
3
4
5
6
7
8
9
10
11
12
13
A
14
1516
Important:
1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency
fluorescent lights can disrupt remote control operation.
2. Be sure nothing obstructs the path between the remote control and the projector. If the path
between the remote control and the projector is obstructed, you can bounce the signal off certain
reflective surfaces such as projector screens.
3. The buttons and keys on the projector have the same functions as the corresponding buttons on
the remote control. This user’s manual describes the functions based on the remote control.
Note:
Complies with FDA performance standards for laser products except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007
– 7 –
Page 22
DLP Projector—Owner’s Manual
ITEM LABEL DESCRIPTION SEE PAGE
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
IR transmitter Transmits signals to projector
Status LED Lights when the remote control is used
Laser Press to operate the on-screen pointer
Up Up arrow when connected through USB to a PC
Right Right arrow when connected through USB to a PC
Down Down arrow when connected through USB to a PC
Page Down Page down when connected through USB to a PC
Up cursor
Right cursor
Down cursor
Volume +/- Adjusts volume
Mute Mutes the built-in speaker
Zoom+ Zoom in
Zoom- Zoom out
Freeze Freeze/unfreezes the on-screen picture
Navigates and changes settings in the OSD
18
17
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
Use of controls, adjustments or performance of procedures other than those specified herein may
result in hazardous laser light exposure.
Blank Makes the screen blank
Source Detects the input device
Auto Auto adjustment for phase, tracking, size, position
Menu Opens the OSD
Status
Keystone top/bottom Corrects image-trapezoid (wider top/bottom) effect
Left cursor Navigates and changes settings in the OSD
Enter
Page Up Page up when connected through USB to a PC
Left Left arrow when connected through USB to a PC
Enter Enter key when connected through USB to a PC
Power Turns the projector on or off
Laser Use as on-screen pointer. DO NOT POINT IN EYES.
！
Caution:
Opens the OSD Status menu (the menu only opens when
an input device is detected)
Changes settings in the OSD
18
33
16
18
11
— 8 —
Page 23
DLP Projector—Owner’s Manual
Remote Control Operating Range
The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or
the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and
15 degrees above or below the projector level. If the projector does not respond to the remote control,
move a little closer.
Projector and Remote Control Buttons
The projector can be operated using the remote control or the buttons on the top of the projector. All
operations can be carried out with the remote control; however, the buttons on the projector are
limited in use.
– 9 –
Page 24
DLP Projector—Owner’s Manual
Inserting the Remote Control Batteries
Remove the battery compartment
1.
cover by sliding the cover in the
direction of the arrow.
Insert the battery with the positive
2.
side facing up.
Replace the cover.
3.
Caution:
1. Only use AAA batteries (Alkaline batteries are recommended).
2. Dispose of used batteries according to local ordinance regulations.
3. Remove the batteries when not using the projector for prolonged periods.
— 10 —
Page 25
Starting and Shutting down the Projector
Connect the power cord to the
1.
projector. Connect the other end to
a wall outlet.
The
projector light.
POWER LED on the
DLP Projector—Owner’s Manual
SETUP AND OPERATION
Turn on the connected devices.
2.
Ensure the POWER LED not a
3.
flashing. Then press the
button to turn on the projector.
The projector splash screen displays
and connected devices are
detected.
See Setting an Access Password
(Security Lo
security lock is enabled.
If more than one input device is
4.
connected, press the SOURCE
button and use ▲▼ to scroll among
devices.
(Component is supported through
the RGB to COMPONENT
ADAPTER.)
ck) on page 13 if
POWER
HDMI 1 / HDMI 2: High-Definition Multimedia
Interface 1 / 2
DisplayPort: Display Port
VGA 1 / VGA 2: Analog RGB1 / RGB 2
S-Video: Super video (Y/C separated)
Composite Video: Traditional composite video
– 11 –
Page 26
DLP Projector—Owner’s Manual
When the “Power Off? /Press
5.
Power again” message appears,
press the POWER button. The
projector turns off.
Caution:
1. Be sure to remove the lens cap before starting projector.
2. Do not unplug the power cord until all of fans are stop–indicating the projector has cooled down.
— 12 —
Page 27
DLP Projector—Owner’s Manual
Setting an Access Password (Security Lock)
You can use the four (arrow) buttons to set a password and prevent unauthorized use of the projector.
When enabled, the password must be entered after you power on the projector. (See Navigating the
OSD on page 18 and Setting the OSD Language on page 19 for help on using OSD menus.)
Important:
Keep the password in a safe place. Without the password, you will not be able to use the projector.
If you lose the password, contact your reseller for information on clearing the password.
Press the MENU button to open the
1.
OSD menu.
Press the cursor ◄► button to move
2.
to the Settings 1 menu, press the
cursor ▲▼ button to select Advanced
1.
Press (Enter) / ► to enter the
3.
Advanced 1 sub menu. Press the
cursor ▲▼ button to select Security
Lock.
Press the cursor ◄► button to enter
4.
and enable or disable security lock
function.
A password dialog box automatically
appears.
– 13 –
Page 28
DLP Projector—Owner’s Manual
You can use the cursor buttons
5.
▲▼◄►
either on keypad or IR remote control
for password entry. You can use any
combination including the same arrow
five times, but not less than five.
Press the cursor buttons in any order
to set the password. Push the MENU
button to exit the dialog box.
The password confirm menu appears
6.
when user presses the power-on key
in case the Security Lock is enabled.
Enter the password in the order you
set it at step 5. In case you forget the
password, please contact the service
center.
The service center will validate the
owner and help reset the password.
— 14 —
Page 29
Adjusting the Projector Level
Take note of the following when setting up the projector:
The projector table or stand should be level and sturdy.
Position the projector so that it is perpendicular to the screen.
Remove the Back Foot Holder on the rear adjuster foot before adjusting the projection
angle.
Ensure the cables are in a safe location. You could trip over them.
DLP Projector—Owner’s Manual
1.
2.
3.
To raise the level of the projector, lift the projector [A] and press the heightadjuster button [B].
The height adjuster drops down [C].
To lower the level of the projector, press the height-adjuster button and push
down on the top of the projector.
To adjust the angle of the picture, turn the tilt-adjuster [D] right or left until
the desired angle has been achieved.
– 15 –
Page 30
DLP Projector—Owner’s Manual
Adjusting the Zoom, Focus and Keystone
Use the Image-zoom
1.
control (on the projector
only) to resize the
projected image and
screen size
Use the Image-focus
2.
control (on the projector
only) to sharpen the
projected image
Use the KEYSTONE
3.
buttons (on the
projector or the remote
control) to correct
image-trapezoid (wider
top or bottom) effect.
.
.
The keystone control
4.
appears on the display.
— 16 —
Page 31
Adjusting the Volume
Press the Volume +/-
1.
buttons on the remote
control.
The volume control
appears on the display.
Press the Left or Right
2.
Cursor buttons on the
keypad to adjust
Volume +/-.
DLP Projector—Owner’s Manual
Press the MUTE button
3.
to turn off the volume.
(This feature is available
only on the remote).
– 17
–
Page 32
DLP Projector—Owner’s Manual
ON-SCREEN DISPLAY (OSD) MENU SETTINGS
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control cursor buttons to navigate and make changes to the OSD.
1
1
1
1
3
4
5
1. To enter the OSD, press the
MENU button.
2. There are three menus.
Press the cursor ◄► button
to move through the menus.
3. Press the cursor ▲▼ button
to move up and down in a
menu.
2
22
6
2
4
5
2
1
3
6
4. Press ◄► to change values
for settings.
5. Press MENU to close the
OSD or leave a submenu.
Note:
Depending on the video source, not all items in the OSD are available. For example, the
Horizontal/Vertical Position items in the Computer menu can only be modified when connected
to a PC. Items that are not available cannot be accessed and are grayed out.
— 18 —
Page 33
Setting the OSD Language
Set the OSD language to your preference before continuing.
1. Press the MENU button. Press the cursor ◄► button to navigate to Settings 1. Press the
cursor ▲▼ button to move to the Advanced 1 menu.
DLP Projector—Owner’s Manual
2. Press (Enter) / ► to enter the Advanced 1 sub menu. Press the cursor ▲▼ button
until Language is highlighted.
3. Press the cursor button until the language you want is highlighted.
4. Press the MENU button four times to close the OSD.
– 19 –
Page 34
DLP Projector—Owner’s Manual
OSD Menu Overview
Use the following illustration to quickly find a setting or determine the range for a setting.
Image
Display Mode
Brightness
Contrast
Computer
Auto Image
Advanced
Presentation, Bright, Game, Movie, TV, sRGB, Blackboard, User
Horizontal Position
Vertical Position
Frequency
Tracking
Brilliant Color
Sharpness
Gamma
Color Temperature
1.8, 2.0, 2.2, 2.4, B&W, Linear
Warm, Normal, Cold
Color Manager
Video AGC
Video Saturation
Video Tint
Red
Green
Blue
Cyan
Magenta
Yellow
White
Off, On
Hue, Saturation, Gain
Hue
Hue
Hue
Hue
Hue
Red, Green, Blue
— 20 —
Page 35
DLP Projector—Owner’s Manual
Settings 1
Source
Projection
Aspect Ratio
Keystone
Digital Zoom
Audio
Advanced 1
Source
Normal, Rear, Ceiling, Rear+Ceiling
Fill, 4:3, 16:9, Letter Box, Native, 2.35:1
Volume
Mute
Language
Security Lock
Blank Screen
Splash Logo
Reference Input Source Select (IR/Keypad)
English, Français, Deutsch, Español, 簡体中文,
繁體中文, Русский, 한국어, اﻟﻌﺮﺑﻴﺔ , Ағылшын
Off, On
Blank, Red, Green, Blue, White
Std., Off, User
Advanced 2
Keypad Lock
3D Setting
Screen Capture
Test Pattern
H Image Shift
V Image Shift
Off, OnClosed Captioning
Off, On
3D
3D Sync Invert
3D Format
None, Grid, White, Red, Green, Blue, Black
Off, DLP-Link, IR
Off, On
Frame Packing, Top/Bottom,
Side-By-Side, Frame
Sequential (3D FramePacking
HDMI source only)
– 21 –
Page 36
DLP Projector—Owner’s Manual
Settings 2
Auto Source
No Signal Power Off
Auto Power On
Lamp Mode
Reset All
Status
Advanced 1
Off, On
Off, On
ECO, Normal, Dynamic ECO
Menu Position
Translucent Menu
Low Power Mode
Fan Speed
Lamp Hour Reset
Projector ID
Center, Down, Up, Left, Right
0%, 25%, 50%, 75%, 100%
Normal, High
Off, On
00-98
Advanced 2
Network
Sleep Timer
Source Filter
Wall Color
HDMI 1
HDMI 2
DisplayPort
VGA 1
VGA 2
S-Video
Composite Video
Off, Light Yellow, Pink, Light Green, Blue, BlackBoard
Disable, Enable
Disable, Enable
Disable, Enable
Disable, Enable
Disable, Enable
Disable, Enable
Disable, Enable
— 22 —
Page 37
DLP Projector—Owner’s Manual
Image Menu
Attention !
All of display mode parameters when changed will be saved to user mode.
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image
Menu. Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to enter
and change values for settings.
ITEM DESCRIPTION
Display Mode Press the cursor ◄► button to enter and set the Display Mode.
Brightness Press the cursor ◄► button to enter and adjust the display brightness.
Contrast Press the cursor ◄► button to enter and adjust the display contrast.
Computer Press (Enter) / ► to enter the Computer menu. See Computer Menu on page 24.
Auto Image
Advanced
Color Manager
Press
position.
Press
25.
Press
information on Color Manager.
(Enter) / ► to automatically adjustment for phase, tracking, size and
(Enter) / ► to enter the Advanced menu. See Advanced Feature on page
(Enter) / ► to enter the color manager menu. See page 26 for more
– 23 –
Page 38
DLP Projector—Owner’s Manual
Computer Menu
Press the MENU button to open the OSD menu. Press ◄► to move to the Image menu. Press ▲▼
to move to the Computer menu and then press Enter or ►. Press ▲▼ to move up and down in the
Computer menu.
ITEM DESCRIPTION
Horizontal Position Press the cursor ◄► button to enter and adjust the display position to left or right.
Vertical Position Press the cursor ◄► button to enter and adjust the display position to up or down.
Frequency Press the cursor ◄► button to enter and adjust the A/D sampling clock.
Tracking Press the cursor ◄► button to enter and adjust the A/D sampling dot.
— 24 —
Page 39
DLP Projector—Owner’s Manual
Advanced Feature
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲
to move to the Advanced menu and then press Enter or ►. Press ▼▲ to move up and down in the
Advanced menu.
ITEM DESCRIPTION
Brilliant Color Press the cursor ◄► button to enter and adjust the Brilliant Color value.
Sharpness Press the cursor ◄► button to enter and adjust the display sharpness.
Gamma Press the cursor ◄► button to enter and adjust the gamma correction of the display.
Color Temperature Press the cursor ◄► button to enter and adjust the color temperature.
Video AGC
Video Saturation Press the cursor ◄► button to enter and adjust the video saturation.
Video Tint Press the cursor ◄► button to enter and adjust the video tint/hue.
Press the cursor ◄► button to enter and enable or disable the Automatic Gain Control
for video source.
– 25 –
Page 40
DLP Projector—Owner’s Manual
Color Manager
Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲
to move to the Color Manager menu and then press Enter or ►. Press ▼▲ to move up and down in
the Color Manager menu.
Red
Green
Blue
Cyan
Magenta
Yellow
White
ITEM DESCRIPTION
Select to enter the Red Color Manager.
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
Select to enter the Green Color Manager.
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
Select to enter the Blue Color Manager.
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
Select to enter the Cyan Color Manager.
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
Select to enter the Magenta Color Manager.
Press the ◄► buttons to adjust the Hue, Saturation, and Gain.
Select to enter the Yellow Color Manager.
Press the◄► buttons to adjust the Hue, Saturation, and Gain.
Select to enter the White Color Manager.
Press the ◄► buttons to adjust the Red, Green, and Blue.
— 26 —
Page 41
DLP Projector—Owner’s Manual
Settings 1 Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
Settings 1 menu. Press the cursor ▲▼ button to move up and down in the Settings 1 menu. Press
◄► to
enter and change values for settings.
ITEM DESCRIPTION
Source
Projection Press the cursor ◄► button to enter and choose from four projection methods:
Aspect Ratio Press the cursor ◄► button to enter and adjust the video aspect ratio.
Keystone Press the cursor ◄► button to enter and adjust the display keystone.
Digital Zoom Press the cursor ◄► button to enter and adjust the Digital Zoom menu.
Audio Press (Enter) / ► to enter the Audio menu. See Audio on page 28.
Advanced 1
Advanced 2
Press the cursor ◄► button to enter the Source menu. Reference input Source select
(IR / Keypad).
Press
page 29.
Press
page 31.
(Enter) / ► to enter the Advanced 1 menu. See Advanced 1 Feature on
(Enter) / ► to enter the Advanced 2 menu. See Advanced 2 Feature on
– 27 –
Page 42
DLP Projector—Owner’s Manual
Audio
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press
▼▲ to move to the Audio menu and then press Enter or ►. Press ▼▲ to move up and down in the
Audio menu.
ITEM DESCRIPTION
Volume Press the cursor ◄► button to enter and adjust the audio volume.
Mute Press the cursor ◄► button to enter and turn on or off the speaker.
— 28 —
Page 43
DLP Projector—Owner’s Manual
Advanced 1 Feature
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press
▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down
in the Advanced 1 menu. Press ◄► to enter and change values for setting.
ITEM DESCRIPTION
Language Press the cursor ◄► button to enter and select a different localization Menu.
Security Lock Press the cursor ◄► button to enter and enable or disable security lock function.
Blank Screen Press the cursor ◄► button to enter and select different color to blank the screen.
Splash Logo Press the cursor ◄► button to enter and select splash logo.
Closed Captioning Press the cursor ◄► button to enter and enable or disable Closed Captioning
Press the cursor ◄► button to enter and enable or disable keys can be work on
Keypad Lock
3D Setting
Screen Capture
keypad.
Note : Hold the cursor ▼ button on keypad for 5 seconds to unlock keypad
Press
Setting.
Press
Picture will auto showing after next power on.
(Enter) / ►to enter the 3D menu. See page 30 for more information on 3D
(Enter) / ► to capture screen, and please wait saving picture.
Note:
To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD device under the
3D Disc Menu.
– 29 –
Page 44
DLP Projector—Owner’s Manual
3D Setting
ITEM DESCRIPTION
3D Press the cursor ◄► button to enter and select different 3D mode.
3D Sync Invert Press the cursor ◄► button to enter and enable or disable 3D Sync Invert.
3D Format Press the cursor ◄► button to enter and enable or disable different 3D Format.
Note:
1. The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting.
2. When the projector is connected to an appropriate 3D source, the 3D OSD menu item is enabled for
selection.
3. Use 3D glasses to view a 3D image.
4. You need 3D content from a 3D DVD or 3D media file.
5. You need to enable the 3D source (some 3D DVD content may have a 3D on-off selection feature).
6. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a
driver on your PC and connect a USB emitter.
7. The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D).
8. Power on the glasses. Glasses normally have a power on -off switch.
Each type of glasses has their own configuration instructions. Please follow the configuration
instructions that come with your glasses to finish the setup process.
Note:
Since different types of glass (DLP link or IR shutter glass) have their own setting instructions,
Please follow the guide to finish the setup process.
— 30 —
Page 45
DLP Projector—Owner’s Manual
Advanced 2 Feature
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press
▲▼ to move to the Advanced 2 menu and then press Enter or ►. Press ▲▼ to move up and down
in the Advanced 2 menu. Press ◄► to enter and change values for setting.
ITEM DESCRIPTION
Test Pattern Press the cursor ◄► button to enter and select internal test pattern.
H Image Shift Press the cursor ◄► button to enter and select H Image Shift.
V Image Shift Press the cursor ◄► button to enter and select V Image Shift.
– 31 –
Page 46
DLP Projector—Owner’s Manual
Settings 2 Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
Settings 2 menu. Press the cursor ▲▼ button to move up and down in the Settings 2 menu.
ITEM DESCRIPTION
Auto Source
No Signal Power
Off (min.)
Auto Power On
Lamp Mode
Reset All Press (Enter) / ► to reset all settings to default values.
Status
Advanced 1
Advanced 2
Press the cursor ◄► button to enter and enable or disable automatic source
detection.
Press the cursor ◄► button to enter and enable or disable automatic shutdown of
lamp when no signal.
Press the cursor ◄► button to enter and enable or disable automatic power On when
AC power is supplied.
Press the cursor ◄► button to enter and select the lamp mode for higher brightness
or lower brightness to save lamp life.
Note:
Remarks to Dynamic ECO of ImageCare
1. Shut-down is not allowed when the projector is boot up less than one minute
2. To protect the lamp, when a shut-down command is received, the lamp mode is forced to be
reset to "Normal" and the system will automatically shut down 10 seconds later
Press
Status.
Press
page 34.
Press
page 46.
(Enter) / ► to enter the Status menu. See page 33 for more information on
(Enter) / ► to enter the Advanced 1 menu. See Advanced 1 Feature on
(Enter) / ► to enter the Advanced 2 menu. See Advanced 2 Feature on
TM
— 32 —
Page 47
DLP Projector—Owner’s Manual
Status
Press the cursor ▲▼ button to move up and down in the Settings 2 menu. Select the Status menu
and press Enter or ► to enter.
ITEM DESCRIPTION
Active Source Display the activated source.
Video Information
Lamp Hours Lamp hour used information is displayed. ( ECO. and Normal)
Serial Number Showing serial number of product.
Displays resolution/video information for RGB source and color standard for Video
source.
– 33 –
Page 48
DLP Projector—Owner’s Manual
Advanced 1 Feature
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press
▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down
in the Advanced 1 menu. Press ◄► to
enter and change values for setting.
ITEM DESCRIPTION
Menu Position Press the cursor ◄► button to enter and select different OSD location.
Translucent Menu Press the cursor ◄► button to enter and select OSD background translucent level.
Low Power Mode Press the cursor ◄► button to enter and turn Low Power Mode on or off.
Press the cursor ◄► button to enter and toggle between Normal and High fan
Fan Speed
Lamp Hour Reset
Projector ID
Network
speeds.
Note: We recommend selecting high speed in high temperatures, high humidity, or
high altitude (higher than 1500m/4921ft) areas.
After replacing the lamp, this item should be reset. See page 35 for more information
on Lamp Hour Reset.
Press the cursor ◄► button to enter and adjust a two digit projector ID from 00
through 98.
Press (Enter) / ► to enter the Network menu. See page 35 for more information
Network.
on
— 34 —
Page 49
DLP Projector—Owner’s Manual
Lamp Hour Reset
Please refer to Resetting the Lamp on page 50 to reset the lamp hour counter.
Network
ITEM DESCRIPTION
Network State Displays the network connection status.
Press ◄► to turn DHCP On or Off.
DHCP
IP Address Enter a valid IP address if DHCP is turned off.
Subnet Mask Enter a valid Subnet Mask if DHCP is turned off.
Gateway Enter a valid Gateway address if DHCP is turned off.
DNS Enter a valid DNS name if DHCP is turned off.
Apply Press (Enter) / ► to confirm settings.
Note: If you select DHCP Off, complete the IP Address, Subnet Mask, Gateway, and
DNS fields.
– 35 –
Page 50
DLP Projector—Owner’s Manual
LAN_RJ45
Wired LAN Terminal functionalites
Remote control and monitoring of a projector from a PC (or Laptop) via wired LAN is also possible.
Compatibility with Crestron / AMX (Device Discovery) / Extron control boxes enables not only collective
projector management on a network but also management from a control panel on a PC (or Laptop)
browser screen.
Crestron is a registered trademark of Crestron Electronics, Inc. of the United States.
Extron is a registered trademark of Extron Electronics, Inc. of the United States.
AMX is a registered trademark of AMX LLC of the United States.
PJLink applied for trademark and logo registration in Japan, the United States of America, and
other countries by JBMIA.
Supported External Devices
This projector is supported by the specified commands of the Crestron Electronics controller and
related software (ex, RoomView ®).
http://www.crestron.com/
This projector is supported by AMX ( Device Discovery ).
http://www.amx.com/
This projector is compliant to support Extron device(s) for reference.
http://www.extron.com/
This projector supports all commands of PJLink Class1 (Version 1.00).
http://pjlink.jbmia.or.jp/english/
For more detail of information about the diverse types of external devices which can be connected to the
LAN/RJ45 port and remote/control the projector, as well as the related control commands supporting for
each external device, kindly please get contact with the Support-Service team directly.
— 36
—
Page 51
DLP Projector—Owner’s Manual
LAN_RJ45
1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (Laptop).
2. On the PC (Laptop), select Start → Control Panel → Network Connections.
– 37 –
Page 52
DLP Projector—Owner’s Manual
3. Right-click on Local Area Connection, and select Properties.
4. In the Properties window, select the General tab, and select Internet Protocol (TCP/IP).
5. Click Properties.
6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK.
— 38 —
Page 53
7. Press the Menu button on the projector.
8. Select Settings2→ Advanced1 → Network
9. After getting into Network, input the following:
DHCP: Off
IP Address: 10.10.10.10
Subnet Mask: 255.255.255.0
Gateway: 0.0.0.0
DNS Server: 0.0.0.0
DLP Projector—Owner’s Manual
10. Press
Open a web browser
(for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
11. In the Address bar, input the IP address: 10.10.10.10.
12. Press
The projector is setup for remote management. The LAN/RJ45 function displays as follows.
(Enter) / ► to confirm settings.
(Enter) / ►.
– 39
–
Page 54
DLP Projector—Owner’s Manual
CATEGORY ITEM INPUT-LENGTH
Crestron Control
Projector
Network Configuration
User Password
Admin Password
IP Address 15
IP ID 3
Port 5
Projector Name 10
Location 10
Assigned To 10
DHCP (Enabled) (N/A)
IP Address 15
Subnet Mask 15
Default Gateway 15
DNS Server 15
Enabled (N/A)
New Password 10
Confirm 10
Enabled (N/A)
New Password 10
Confirm 10
For more information, please visit http://www.crestron.com.
— 40 —
Page 55
DLP Projector—Owner’s Manual
Preparing Email Alerts
1. Make sure that user can access the homepage of LAN RJ45 function by web browser (for example, Microsoft Internet Explorer v6.01/v8.0).
2. From the Homepage of LAN/RJ45, click Alert Settings.
3. By default, these input boxes in Alert Settings are blank.
– 41 –
Page 56
DLP Projector—Owner’s Manual
4. For Sending alert mail, input the following:
The SMTP field is the mail server for sending out email (SMTP protocol). This is a required field.
The To field is the recipient’s email address (for example, the projector administrator). This is a
required field.
The Cc field sends a carbon copy of the alert to the specified email address. This is an optional
field (for example, the projector administrator’s assistant).
The From field is the sender’s email address (for example, the projector administrator). This is a
required field.
Select the alert conditions by checking the desired boxes.
Note: Fill in all fields as specified. User can click Send Test Mail to test what setting is correct. For
successful sending an e-mail alert, you must select alert conditions and enter a correct e-mail
address.
— 42 —
Page 57
DLP Projector—Owner’s Manual
RS232 by Telnet Function
Besides projector connected to RS232 interface with “Hyper-Terminal” communication by dedicated
RS232 command control, there is alternative RS232 command control way, so called “RS232 by
TELNET” for LAN/RJ45 interface.
Quick Start-Guide for “RS232 by TELNET”
Check and get the IP-Address on OSD of the projector.
Make sure that laptop/PC can access the web-page of the projector.
Make sure that “Windows Firewall” setting to be disabled in case of “TELNET” function filtering
out by laptop/PC.
Start => All Programs => Accessories => Command Prompt
– 43 –
Page 58
DLP Projector—Owner’s Manual
Input the command format like the below:
telnet ttt.xxx.yyy.zzz 23 (“Enter” key pressed)
(ttt.xxx.yyy.zzz: IP-Address of the projector)
If Telnet-Connection ready, and user can have RS232 command input, then “Enter” key pressed,
the RS232 command will be workable.
How to have TELNET enabled in Windows VISTA / 7
By default installation for Windows VISTA, “TELNET” function is not included. But end-user can
have it by way of “Turn Windows features On or Off” to be enabled.
Open “Control Panel” in Windows VISTA
Open “Programs”
— 44 —
Page 59
Select “Turn Windows features on or off” to open
DLP Projector—Owner’s Manual
Have “Telnet Client” option checked, then press “OK” button.
Specsheet for “RS232 by TELNET” :
1. Telnet: TCP
2. Telnet port: 23
(for more detail, kindly please get contact with the service agent or team)
3. Telnet utility: Windows “TELNET.exe” (console mode)
4. Disconnection for RS232-by-Telnet control normally: Close Windows Telnet utility directly
after TELNET connection ready
5. Limitation 1 for Telnet-Control: there is less than 50 bytes for successive network payload for
Telnet-Control application.
Limitation 2 for Telnet-Control: there is less than 26 bytes for one complete RS232 command
for Telnet-Control.
Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be more than
200 (ms).
(*, In Windows XP built-in “TELNET.exe” utility, “Enter” key pressed will have “CarriageReturn” and “New-Line” code.)
– 45 –
Page 60
DLP Projector—Owner’s Manual
Advanced 2 Feature
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press
▲▼ to move to the Advanced 2 menu and then press Enter or ►. Press ▲▼ to move up and down
in the Advanced 2 menu. Press ◄► to
enter and change values for setting.
ITEM DESCRIPTION
Sleep Timer
Source Filter
Wall Color
Press the cursor ◄► button to enter and set Sleep timer. The projector automatically
turns off after the preset period of time.
Press
information on Source Filter.
Press the cursor ◄► button to enable or disable the wall color function.
(Off/ Light Yellow/ Pink/ Light Green/ Blue/ Blackboard)
(Enter) / ► to enter the Source Filter menu. See page 47 for more
— 46 —
Page 61
Source Filter
Press the ENTER button to enter the Source Filter sub menu.
ITEM DESCRIPTION
DLP Projector—Owner’s Manual
HDMI 1 Press the cursor ◄► button to enter and enable or disable the HDMI 1 source.
HDMI 2 Press the cursor ◄► button to enter and enable or disable the HDMI 2 source.
DP Press the cursor ◄► button to enter and enable or disable the DisplayPort source.
VGA 1 Press the cursor ◄► button to enter and enable or disable the VGA1 source.
VGA 2 Press the cursor ◄► button to enter and enable or disable the VGA2 source.
S-Video Press the cursor ◄► button to enter and enable or disable the S-Video source.
Composite Video
Press the cursor ◄► button to enter and enable or disable the Composite Video
source.
– 47 –
Page 62
DLP Projector—Owner’s Manual
MAINTENANCE AND SECURITY
Replacing the Projection Lamp
The projection lamp should be replaced when it burns out. It should only be replaced with a certified
replacement part, which you can order from your local dealer.
Important:
a. The projection lamp used in this product contains a small amount of mercury.
b. Do not dispose this product with general household waste.
c. Disposal of this product must be carried out in accordance with the regulations of your local
authority.
Warning:
Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp. Failure to
do so could result in a severe burn.
Caution:
In rare cases the lamp bulb may burn out during normal operation and cause glass dust or shards
to be discharged outward from the rear exhaust vent.
Do not inhale or do not touch glass dust or shards. Doing so could result in injury.
Always keep your face away from the exhaust vent so that you do not suffer from the gas and
broken shards of the lamp.
When removing the lamp from a ceiling-mounted projector, make sure that no one is under the
projector. Glass fragments could fall if the lamp has been burned out.
！
IF A LAMP EXPLODES
If a lamp explodes, the gas and broken shards may scatter inside the projector and they may come
out of the exhaust vent. The gas contains toxic mercury.
Open windows and doors for ventilation.
If you inhale the gas or the shards of the broken lamp enter your eyes or mouth, consult the doctor
immediately.
Press the lamp
1.
compartment cover down
as shown and the cover
pops up.
— 48 —
Page 63
Remove the lamp
2.
compartment cover.
Remove the three screws
3.
from the lamp module.
Lift the module handle up.
4.
DLP Projector—Owner’s Manual
Pull firmly on the module
5.
handle to remove the lamp
module.
Reverse steps 1 to 5 to
install the new lamp
6.
module.
While installing, align the
lamp module with the
connector and ensure it is
level to avoid damage.
Note:
The lamp module must sit
securely in place and the
lamp connector must be
connected properly before
tightening the screws.
– 49
–
Page 64
DLP Projector—Owner’s Manual
Resetting the Lamp
After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:
Press the MENU button to open
1.
the OSD menu.
Press the cursor ◄► button to
2.
move to the Settings 2 menu.
Press the cursor button to move
down to Advanced 1 and press
enter.
Press the cursor ▼▲ button to
3.
move down to Lamp Hour Reset.
Press the cursor ► or Enter
4.
button.
A message screen appears.
Press ▼▲◄► buttons to reset
5.
the lamp hour.
Press the MENU button to get
6.
back to Settings 2.
— 50 —
Page 65
DLP Projector—Owner’s Manual
Cleaning the Projector
Cleaning the projector to remove dust and grime will help ensure trouble-free operation.
Warning:
1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so
could result in a severe burn.
2. Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings
on the projector.
3. If a little water gets into the projector interior while cleaning, leave unplugged in a well-ventilated
room for several hours before using.
4. If a lot of water gets into the projector interior when cleaning, have the projector serviced.
Cleaning the Lens
You can purchase optic lens cleaner from most camera stores. Refer to the following to clean the
projector lens.
1. Apply a little optic lens cleaner to a clean soft cloth. (Do not apply the cleaner directly to
the lens.)
2. Lightly wipe the lens in a circular motion.
Caution:
1. Do not use abrasive cleaners or solvents.
2. To prevent discoloration or fading, avoid getting cleaner on the projector case.
Cleaning the Case
Refer to the following to clean the projector case.
1. Wipe off dust with a clean dampened cloth.
2. Moisten the cloth with warm water and mild detergent (such as used to wash dishes), and
then wipe the case.
3. Rinse all detergent from the cloth and wipe the projector again.
Caution:
To prevent discoloration or fading of the case, do not use abrasive alcohol-based cleaners.
– 51 –
Page 66
DLP Projector—Owner’s Manual
Using the Kensington® Lock & Using the Security Bar
Using the Kensington® Lock
If you are concerned about security, attach the projector to a permanent object with the Kensington
slot and a security cable.
Note:
Contact your vendor for details on purchasing a suitable Kensington security cable.
The security lock corresponds to Kensington’s MicroSaver Security System. If you have any
comment, contact: Kensington, 2853 Campus Drive, San Mateo, CA 94403, U.S.A. Tel: 800-5354242, http://www.Kensington.com.
Using the Security Bar
In addition to the password protection function and the Kensington lock, the Security Bar helps
protect the projector from unauthorized removal. See the following picture.
— 52 —
Page 67
DLP Projector—Owner’s Manual
TROUBLESHOOTING
Common problems and solutions
These guidelines provide tips to deal with problems you may encounter while using the projector. If
the problem remains unsolved, contact your dealer for assistance.
Often after time spent troubleshooting, the problem is traced to something as simple as a loose
connection. Check the following before proceeding to the problem-specific solutions.
Use some other electrical device to confirm that the electrical outlet is working.
Ensure the projector is turned on.
Ensure all connections are securely attached.
Ensure the attached device is turned on.
Ensure a connected PC is not in suspending mode.
Ensure a connected notebook computer is configured for an external display.
(This is usually done by pressing an Fn-key combination on the notebook.)
Tips for Troubleshooting
In each problem-specific section, try the steps in the order suggested. This may help you to solve the
problem more quickly.
Try to pin point the problem and thus avoid replacing non-defective parts.
For example, if you replace batteries and the problem remains, put the original batteries back and go
to the next step.
Keep a record of the steps you take when troubleshooting: The information may be useful when
calling for technical support or for passing on to service personnel.
– 53 –
Page 68
DLP Projector—Owner’s Manual
y
g
r
r
r
r
p
r
r
r
r
r
r
LED Error Messages
ERROR CODE MESSAGES
Lamp Read
Start ON OFF OFF
Coolin
Over Temperature OFF ON OFF
T1 erro
Thermal Break Sensor erro
G794 erro
Lamp fail 5 blinks OFF OFF
Ballast temp ove
Ballast circuit short 5 blinks OFF 2 blinks
Lamp End of lamp life detected 5 blinks OFF 3 blinks
Lamp did not ignite 5 blinks OFF 4 blinks
Lamp extinguished during normal operation 5 blinks OFF 5 blinks
Lamp extinguished during run-up phase 5 blinks OFF 6 blinks
Lamp voltage too low 5 blinks OFF 7 blinks
Ballast fail 5 blinks OFF 8 blinks
ON OFF OFF
ON OFF OFF
3 blinks OFF 1 blinks
4 blinks OFF 4 blinks
5 blinks OFF 1 blinks
POWER LED
BLUE
4 blinks OFF OFF
TEMP LED
RED
LAMP LED
RED
Ballast communication fail 5 blinks OFF 10 blinks
Ballast over tem
Restrike lamp fail 1 5 blinks OFF 12 blinks
Restrike lamp fail 2 5 blinks OFF 13 blinks
Lamp fail 1 5 blinks OFF 14 blinks
Lamp fail 2 5 blinks OFF 15 blinks
Fan 1 erro
Fan 2 erro
Fan 3 erro
Fan 4 erro
Case Open 7 blinks OFF OFF
DMD erro
Color wheel erro
In the event of an error, please disconnect the AC power cord and wait for one (1) minute before restarting
the projector. If the Power or Lamp LEDs are still blinking or any other situation that isn't listed in the chart
above
8 blinks OFF OFF
, please contact your service center.
5 blinks OFF 11 blinks
6 blinks OFF 1 blinks
6 blinks OFF 2 blinks
6 blinks OFF 3 blinks
6 blinks OFF 4 blinks
9 blinks OFF OFF
Image Problems
Problem: No image appears on the screen
1. Verify the settings on your notebook or desktop PC.
2. Turn off all equipment and power up again in the correct order.
Problem: The image is blurred
1. Adjust the Focus on the projector.
— 54 —
Page 69
DLP Projector—Owner’s Manual
2. Press the Auto button on the remote control.
3. Ensure the projector-to-screen distance is within the specified range.
4. Check that the projector lens is clean.
Problem: The image is wider at the top or bottom (trapezoid effect)
1. Position the projector so it is as perpendicular to the screen as possible.
2. Use the Keystone button on the remote control to correct the problem.
Problem: The image is reversed
Check the Projection setting on the Settings 1 menu of the OSD.
Problem: The image is streaked
1. Set the Frequency and Tracking settings on the Image->Computer menu of the OSD to
the default settings.
2. To ensure the problem is not caused by a connected PC’s video card, connect to another
computer.
Problem: The image is flat with no contrast
Adjust the Contrast setting on the Image menu of the OSD.
Problem: The color of the projected image does not match the source image.
Adjust the Color Temperature and Gamma settings on the Image->Advanced menu of the
OSD.
Lamp Problems
Problem: There is no light from the projector
1. Check that the power cable is securely connected.
2. Ensure the power source is good by testing with another electrical device.
3. Restart the projector in the correct order and check that the Power LED is on.
4. If you have replaced the lamp recently, try resetting the lamp connections.
5. Replace the lamp module.
6. Put the old lamp back in the projector and have the projector serviced.
Problem: The lamp goes off
1. Power surges can cause the lamp to turn off. Re-plug power cord. When the Power LED
is on, press the power button.
2. Replace the lamp module.
3. Put the old lamp back in the projector and have the projector serviced.
Remote Control Problems
Problem: The projector does not respond to the remote control
1. Direct the remote control towards remote sensor on the projector.
2. Ensure the path between remote and sensor is not obstructed.
3. Turn off any fluorescent lights in the room.
4. Check the battery polarity.
5. Replace the battery.
6. Turn off other Infrared-enabled devices in the vicinity.
7. Have the remote control serviced.
– 55 –
Page 70
DLP Projector—Owner’s Manual
Audio Problems
Problem: There is no sound
1. Adjust the volume on the remote control.
2. Adjust the volume of the audio source.
3. Check the audio cable connection.
4. Test the source audio output with other speakers.
5. Have the projector serviced.
Problem: The sound is distorted
1. Check the audio cable connection.
2. Test the source audio output with other speakers.
3. Have the projector serviced.
Having the Projector Serviced
If you are unable to solve the problem, you should have the projector serviced. Pack the projector in
the original carton. Include a description of the problem and a checklist of the steps you took when
trying to fix the problem: The information may be useful to service personnel. For servicing, return the
projector to the place you purchased it.
— 56 —
Page 71
HDMI Q & A
Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI
cable?
Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or HighSpeed cables.
˙Standard (or “category 1”) HDMI cables have been tested to perform at speeds of 75Mhz or
up to 2.25Gbps, which is the equivalent of a 720p/1080i signal.
˙High Speed (or “category 2”) HDMI cables have been tested to perform at speeds of 340Mhz
or up to 10.2Gbps, which is the highest bandwidth currently available over an HDMI cable
and can successfully handle 1080p signals including those at increased color depths and/or
increased refresh rates from the Source. High-Speed cables are also able to accommodate
higher resolution displays, such as WQXGA cinema monitors (resolution of 2560 x 1600).
Q. How do I run HDMI cables longer than 10 meters?
There are many HDMI Adopters working on HDMI solutions that extend a cable’s effective
distance from the typical 10 meter range to much longer lengths. These companies
manufacture a variety of solutions that include active cables (active electronics built into
cables that boost and extend the cable’s signal), repeaters, amplifiers as well as CAT5/6 and
fiber solutions.
DLP Projector—Owner’s Manual
Q. How can I tell if a cable is an HDMI certified cable?
All HDMI products are required to be certified by the manufacturer as part of the HDMI
Compliance Test Specification. However, there may be instances where cables bearing the
HDMI logo are available but have not been properly tested. HDMI Licensing, LLC actively
investigates these instances to ensure that the HDMI trademark is properly used in the
market. We recommend that consumers buy their cables from a reputable source and a
company that is trusted.
For more detail information check http://www.hdmi.org/learningcenter/faq.aspx#49
– 57 –
Page 72
DLP Projector—Owner’s Manual
Specifications
Model
Display type
Resolution
Projection distance
Projection screen size
Projection lens
Zoom ratio
Vertical keystone
correction
Projection methods
Data compatibility
SDTV/EDTV/ HDTV
Video compatibility
H-Sync
V-Sync
Operation temperature
Dimensions
AC Input
Power consumption
Lamp
Audio speaker
Input Terminals
Output Terminals
Control Terminals
Security
EIP-X5500 EIP-W4600 EIP-U4700
DMD, 0.7" XGA, Type A DMD, 0.65" WXGA, S450 DMD, 0.67" WUXGA, Type A
XGA (1024 x 768) WXGA (1280 x 800) WUXGA(1920×1200)
1.5 - 10 m 1.2 - 10 m 1 - 10 m
23.4" - 300" 27.6" ~ 300" 24.3" - 300"
1.15x 1.2x 1.2x
VGA, SVGA, XGA, WXGA, SXGA, SXGA+, UXGA, WUXGA, Mac
300W (ECO), <0.5W(Stand By) / 370W (Normal), <0.5W(Stand By)
SPECIFICATIONS
Manual Zoom
+/- 30 Degree
Front, Rear, Desktop/Ceiling (Rear, Front)
480i, 576i, 480p, 576p, 720p, 1080i, 1080p
NTSC, PAL, SECAM
15, 31~91.4KHz & 101.6KHz
24~30Hz, 47~120Hz
5° ~ 40°C
334.03 mm (W) x 267.65 mm (D) x 120.85 mm (H)
AC Universal 100-240V
310W (Std.) / 245W (Eco)
3W mono
VGA IN x 2
Display Port x 1
Composite x 1
S-Video x 1
HDMI x 2
Audio-In RCA (L/R) x 1
Audio-In (Mini-Jack) x 1
VGA-Out (15pin D-Sub) x 1
Audio-Out (Mini-Jack) x 1
RS-232C
3D sync
Screen trigger: DC Jack x 1 (DC12V 200mA output function)
USB (Type mini B) - service only
RJ45
Kensington lock / Security Bar
Note: For questions regarding product specifications, please contact your local distributor.
— 58 —
Page 73
Projection Distance vs. Projection Size
Projection Distance and Size Table
DLP Projector—Owner’s Manual
X5500
Diagonal
length (inch)
30 2.00 1.50 1097.3 1280.2 56.5
40 2.67 2.00 1463.0 1706.9 75.3
60 4.00 3.00 2194.6 2560.3 112.9
80 5.33 4.00 2926.1 3413.8 150.6
100 6.67 5.00 3657.6 4267.2 188.2
120 8.00 6.00 4389.1 5120.6 225.9
140 9.33 7.00 5120.6 5974.1 263.5
160 10.67 8.00 5852.2 6827.5 301.1
190 12.67 9.50 6949.4 8107.7 357.6
230 15.33 11.50 8412.5 9814.6 432.9
280 18.67 14.00 10241.3
300 20.00 15.00 10972.8
Screen Size (feet) Projection distance (mm)
Width Hheght Wide Tele (mm)
－
－
Offset (A)
527.0
564.6
– 59 –
Page 74
DLP Projector—Owner’s Manual
W4600
Diagonal
length (inch)
30
40
60
80
100
120
140
160
190
230
280
300
Screen Size (feet) Projection distance (mm)
Offset (A)
Width Height Wide Tele (mm)
2.12 1.32
－
1302.7
2.83 1.77 1429.3 1736.9
4.24 2.65 2144.0 2605.4
5.65 3.53 2858.7 3473.8
7.07 4.42 3573.3 4342.3
8.48 5.30 4288.0 5210.8
9.89 6.18 5002.7 6079.2
11.31 7.07 5717.4 6947.7
13.43 8.39 6789.4 8250.4
16.25 10.16 8218.7 9987.3
19.79 12.37 10005.4
21.20 13.25 10720.0
－
－
45.8
61.1
91.7
122.2
152.8
183.4
213.9
244.5
290.3
351.4
427.8
458.4
U4700
Diagonal
length (inch)
30 2.12 1.32
40 2.83 1.77
60 4.24 2.65
80 5.65 3.53
100 7.07 4.42
120 8.48 5.30
140 9.89 6.18
160 11.31 7.07
190 13.43 8.39
230 16.25 10.16
280 19.79 12.37
300 21.20 13.25
Screen Size (feet) Projection distance (mm)
Width Height Wide Tele (mm)
1033.9 1240.7
1378.5 1654.2
2067.8 2481.3
2757.0 3308.4
3446.3 4135.5
4135.5 4962.6
4824.8 5789.7
5514.0 6616.8
6547.9 7857.5
7926.4 9511.7
9649.5
10338.8
－
－
Offset (A)
33.9
45.2
67.8
90.5
113.1
135.7
158.3
180.9
214.9
260.1
316.6
339.2
— 60 —
Page 75
Timing Mode Table
DLP Projector—Owner’s Manual
SIGNAL RESOLUTION
NTSC － 15.734 60 ○ － － －
PAL/SECAM － 15.625 50 ○ － － －
VESA
720 x 400 31.5 70.1 － － ○ ○
720 x 400 37.9 85.04 － － ○ ○
640 x 480 31.5 60.0 － － ○ ○
640 x 480 37.9 72.8 － － ○ ○
640 x 480 37.5 75.0 － － ○ ○
640 x 480 43.3 85.0 － － ○ ○
800 x 600 35.2 56.3 － － ○ ○
800 x 600 37.9 60.3 － － ○ ○
800 x 600 46.9 75.0 － － ○ ○
800 x 600 48.1 72.2 － － ○ ○
800 x 600 53.7 85.1 － － ○ ○
800 x 600 76.3 120.0 － － ○ ○
1024 x 768 48.4 60.0 － － ○ ○
H-SYNC
( KHZ )
V-SYNC
( HZ )
COMPOSITE
S_VIDEO
COMPONENT
RGB
(ANALOG)
DP/HDMI
(DIGITAL)
1024 x 768 56.5 70.1 － － ○ ○
1024 x 768 60.0 75.0 － － ○ ○
1024 x 768 68.7 85.0 － － ○ ○
1024 x 768 97.6 120.0 － － ○ ○
1152 x 864 67.5 75.0 － － ○ ○
1280 x 720 45.0 60.0 － － ○ ○
1280 x 720 90.0 120.0 － － ○ ○
1280 x 768 47.4 60.0 － － ○ ○
1280 x 768 47.8 59.9 － － ○ ○
1280 x 800 49.7 59.8 － － ○ ○
1280 x 800 62.8 74.9 － － ○ ○
1280 x 800 71.6 84.9 － － ○ ○
1280 x 800 101.6 119.9 － － ○ ○
1280 x 1024 64.0 60.0 － － ○ ○
1280 x 1024 80.0 75.0 － － ○ ○
1280 x 1024 91.1 85.0 － － ○ ○
1280 x 960 60.0 60.0 － － ○ ○
1280 x 960 85.9 85.0 － － ○ ○
1366 x 768 47.7 60.0 － － ○ ○
1400 x 1050 65.3 60.0 － － ○ ○
– 61 –
Page 76
DLP Projector—Owner’s Manual
SIGNAL RESOLUTION
1440 x 900 55.9 60.0 － － ○ ○
1440 x 900 70.6 75.0 － － ○ ○
1600 x1200 75.0 60 － － ○ ○
1680 x 1050 64.7 59.9 － － ○ ○
1680 x 1050 65.3 60.0 － － ○ ○
1920 x 1200 74.0 60.0 － － ○ ○
1920 x 1080 67.5 60.0 － － ○ ○
640 x 480 35.0 66.7 － － ○ ○
Apple
Macintosh
SDTV
EDTV
832 x 624 49.7 74.5 － － ○ ○
1024 x 768 60.2 74.9 － － ○ ○
1152 x 870 68.7 75.1 － － ○ ○
480i 15.734 60.0 － ○ － ○
576i 15.625 50.0 － ○ － ○
576p 31.3 50.0 － ○ － ○
480p 31.5 60.0 － ○ － ○
H-SYNC
( KHZ )
V-SYNC
( HZ )
COMPOSITE
S_VIDEO
COMPONENT
RGB
(ANALOG)
DP/HDMI
(DIGITAL)
720p 37.5 50.0 － ○ － ○
720p 45.0 60.0 － ○ － ○
1080i 33.8 60.0 － ○ － ○
1080i 28.1 50.0 － ○ － ○
HDTV
O：Frequency supported
—：Frequency not supported
The native resolution of the panel is 1920x1080 (1080P) / 1024x768(XGA)
Resolution others than native resolution may be display with uneven size of text or line
The color of mean Displayable only. (4:3 only)
The color of mean may have a little noise is acceptable. Because video mode sync don’t auto adjustment.
HDTV timing main check tool is DVD player, VG828 is secondary
1080p 27 24.0 － ○ － ○
1080p 28 25.0 － ○ － ○
1080p 33.7 30.0 － ○ － ○
1080p 56.3 50.0 － ○ － ○
1080p 67.5 60.0 － ○ － ○
— 62 —
Page 77
Projector Dimensions
DLP Projector—Owner’s Manual
– 63
–
Page 78
DLP Projector—Owner’s Manual
REGULATORY COMPLIANCE
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his/her own expense.
Changes or modifications not expressly approved by the parties responsible for compliance could
void the user’s authority to operate the equipment.
Canada
This class B digital apparatus complies with Canadian ICES-003.
— 64 —
Page 79
U.S.A.
Canada
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
U.S.A.
Tel: 800-242-3454 (949)-457-0200
Fax: 800-457-3454 (949)-457-7878
E-Mail: usa@eiki.com
Deutschland & Österreich
EIKI Deutschland GmbH
Am Frauwald 12
65510 Idstein
Deutschland
Tel: +49-6126-9371-0
Fax: +49-6126-9371-14
E-Mail: info@eiki.de
EIKI CANADA - Eiki International, Inc.
P.O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada
Tel: 800-563-3454 (705)-527-4084
Fax: 800-567-4069 (705)-527-4087
E-Mail: canada@eiki.com
Eastern Europe
EIKI CZECH SPOL. s.r.o.
Nad Cementárnou 1163/4a
Praha 4, Podolí
147 00
Czech Republic
Tel: +420 241 410 928
+420 241 403 095
Fax: +420 241 409 435
E-Mail: info@eiki.cz
China
EIKI (Shanghai) Co., Ltd.
LAKESIDE OASIS MIDDLE RING
BUSINESS CENTRE
Block 1, Room 606,
1628, Jin Sha Jiang Road
Shanghai, 200333
CHINA
Tel: 86-21-3251-3993
Service Hot line: 86-21-3251-3995
Fax: 86-21-3251-3997
E-mail: info@eiki-china.com
Japan & Worldwide
EIKI Industrial Company Limited.
6-23 Teramoto, Itami-shi, Hyogo,
664-0026 JAPAN
Tel: +81-72-782-7492
Fax: +81-72-781-5435
South East Asia
EIKI Industrial (M) Sdn Bhd
No. 11, Nouvelle Industrial Park,
Lorong Teknologi B, Taman Sains Selangor
1, Kota Damansara PJU5,
47810 Petaling Jaya, Selangor Darul Ehsan,
Malaysia
Tel: +603-6157-9330
Fax: +603-6157-1320
E-Mail: sales@eiki.my
WorldWide Website http://www.eiki.com
Loading...