Ei Electronics Ei414 Instruction Manual
Instruction Manual
Read and retain carefully for as long as the product is being used. It contains vital information on the operation and installation of your
Fire / CO Alarm Interface. The booklet should be regarded as part of the product.
If you are just installing the unit, the booklet must be given to the householder. The booklet is to be given to any subsequent user.
Model: Ei414
Fire / CO Alarm Interface
Contents
1. Introduction & Connection Diagrams ........................................................................................
2. Typical Installation Examples ..........................................................................................................
3. Installation ............................................................................................................................................
4. House Coding .......................................................................................................................................
5. Testing ....................................................................................................................................................
6. Service Relay ........................................................................................................................................
7. User Information ................................................................................................................................
8. Troubleshooting the RadioLINK .....................................................................................................
9. Technical Specification .....................................................................................................................
10. Service & Guarantee .........................................................................................................................
11. Contact Us ............................................................................................................................................
3
8
11
18
22
23
24
26
27
28
32
Page
2
1. Introduction
The Ei414 Fire / CO Alarm Interface can be used to connect Ei Electronics RadioLINK Alarm Systems to
suitable other Systems such as Fire Panels, Telecare Systems, Auto Diallers, Security Systems etc. The Ei414
has 3 output relays for Fire, CO & Service that can be triggered by an Ei Electronics RF Alarm System. These relays
can be directly connected to the other Systems or alternatively can be used to trigger one of the other Systems
RF transmitters. A RadioLINK system consists of Ei Electronics RadioLINK Smoke, Heat and CO Alarms along with
RadioLINK accessory devices that are interconnected using the Ei Electronics proprietary RF protocol system. The
Ei414 must be House Coded to the other RadioLINK devices in the system.
service
ON TEST
OFF
Fire / CO Alarm Interface
Alarm Code LED’s
RadioLink LEDPower LED
Key Switch
On
Off
Test
open screws
then insert screwdriver into the notch to remove cover
How to remove Cover
Fire / CO Alarm Interface
3
Wireless Smoke Alarm System Wireless Smoke &
Carbon Monoxide Alarm System
RF Smoke Alarm
RF Smoke Alarm
RF Smoke Alarm
Alarm Controller
RF Smoke Alarm
Model No. - Alarms Comment
Ei262 Mains Carbon Monoxide Alarms The Ei262 has built-in RadioLINK technology
Ei140RC, Ei160RC & Ei2110 Series Smoke Alarms
Due to our continuous improvements policy, product performance and features are being frequently updated - See Contact Us section
The Alarms must be fitted on Ei168RC RadioLINK bases
Ei605 & Ei650 Series Smoke Alarms Alarms must be fitted with the correct Ei605 & Ei650 series RadioLINK module
Ei208W powered for life Carbon Monoxide Alarms The Alarms must be fitted with Ei200MRF RadioLINK modules
Ei170RF & other RadioLINK devices Contact us or visit our website for details
Works
with
RF CO Alarm
Alarm Interface Alarm Interface
RF Smoke Alarm
Alarm Controller
4
5
External Panel
(Fire / Telecare etc.)
Ei414
service
ON TEST
OFF
Fire / CO Alarm Interface
Hardwired Output Connection Diagram
230VAC
11 - 30VDC
Ei208WRF
For connection to External Panel see Manufacturers instructions
Ei650RF Ei168RCEi262 Ei450
RF Signal Input
from Ei Alarm System
Fire / CO Alarm Controller
6
External Panel
(Fire / Telecare etc.)
Ei414
service
ON TEST
OFF
Fire / CO Alarm Interface
Hardwired Output Connection Diagram
230VAC
11 - 30VDC
Ei208WRF
For connection to External Panel see Manufacturers instructions
Ei650RF Ei168RCEi262 Ei450
RF Signal Input
from Ei Alarm System
Fire / CO Alarm Controller
Ei414
service
ON TEST
OFF
Fire / CO Alarm Interface
230VAC
11 - 30VDC
Ei208WRF
For connection to External Panel & RF Transmitter see Manufacturers instructions
Ei650RF Ei168RCEi262 Ei450
RF Signal Input
from Ei Alarm System
Fire / CO Alarm Controller
External RF Panel
(Fire / Telecare etc.)
Wireless (RF) Connection Output Diagram
RF
Transmitter
RF
Transmitter
RF
Transmitter
7
Ei414
For connection to External Panel see Manufacturers instructions
Ei414
service
ON TEST
OFF
Fire / CO Alarm Interface
230VAC
11 - 30VDC
Ei208WRF
For connection to External Panel & RF Transmitter see Manufacturers instructions
For connection to External Devices see Manufacturers instructions
Ei650RF Ei168RCEi262 Ei450
RF Signal Input
from Ei Alarm System
Fire / CO Alarm Controller
Ei208WRF Ei650RF Ei168RCEi262 Ei450
RF Fire Signal
Output
Fire / CO Alarm Controller
External RF Panel
(Fire / Telecare etc.)
Wireless (RF) Connection Output Diagram
External Device
(Strobe etc.)
Ei414
service
ON TEST
OFF
Fire / CO Alarm Interface
External
Fire Panel
External
Device
(sprinkler flow valve)
Input Connection Diagram
230VAC
RF
Transmitter
RF
Transmitter
RF
Transmitter
8
2. Typical Installation Examples
Ei164RC Heat Alarm
with Ei168RC
RadioLINK Base
Ei414
Ei166RC Smoke Alarm
with Ei168RC
RadioLINK Base
RadioLINK Mains Powered Alarm System
Fire / CO Alarm Controller
Ei450 Alarm
Controller
service
ON TEST
OFF
Fire / CO Alarm Interface
External Panel
(Fire / Telecare etc.)
In the event of a fire, the Ei161RC / Ei166RC
/ Ei164RC will detect Smoke / Heat and the
Ei168RC base will transmit an RF fire signal
to the Ei414. The Ei414 will then trigger the
external panel.
N.B. The Ei450 Alarm Controller MUST be
used to test the RadioLINK Alarm System (at
least 1 x Ei168RC must be fitted - see ‘User
Information’ section).
9
Ei650RF
Smoke Alarm
Ei603TYCRF
Heat Alarm
RF Transmitter
RadioLINK Battery Powered Alarm System
Ei164RC Heat Alarm
with Ei168RC
RadioLINK Base
Ei414
Ei166RC Smoke Alarm
with Ei168RC
RadioLINK Base
RadioLINK Mains Powered Alarm System
Fire / CO Alarm Controller
Ei450 Alarm
Controller
Fire / CO Alarm Controller
Ei450 Alarm
Controller
service
ON TEST
OFF
Fire / CO Alarm Interface
External Panel
(Fire / Telecare etc.)
Ei414
service
ON TEST
OFF
Fire / CO Alarm Interface
External RF Panel
(Fire / Telecare etc.)
In the event of a fire, the Ei650RF / Ei603TYCRF
will detect Smoke / Heat and transmit an
RF fire signal to the Ei414. The Ei414 will
then trigger the RF transmitter and alert the
external panel.
10
Ei650RF
Smoke Alarm
Ei603TYCRF
Heat Alarm
RF Transmitter
RadioLINK Battery Powered Alarm System
Ei164RC
Heat Alarm
Ei166RC
Smoke Alarm
with Ei168RC
RadioLINK Base
Ei208WRF
Carbon Monoxide
Alarm
RadioLINK / Hard Wired Hybrid System
Ei164RC Heat Alarm
with Ei168RC
RadioLINK Base
Ei414
Ei166RC Smoke Alarm
with Ei168RC
RadioLINK Base
Fire / CO Alarm Controller
Ei650RF
Smoke Alarm
Ei450 Alarm
Controller
Ei450 Alarm
Controller
Fire / CO Alarm Controller
Ei450 Alarm
Controller
service
ON TEST
OFF
Fire / CO Alarm Interface
RF Transmitters
Ei414
fire
CO
service
ON TEST
OFF
Fire / CO Alarm Interface
(Fire / Telecare etc.)
Ei414
service
ON TEST
OFF
Fire / CO Alarm Interface
External RF Panel
(Fire / Telecare etc.)
External RF Panel
(Fire / Telecare etc.)
In the event of a fire /
CO event, the relevant
Smoke / Heat / CO
Alarm will transmit an
RF signal to the Ei414.
The Ei414 will then
trigger the relevant RF
transmitter and alert the
external panel.
Loading...