MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
C ambient temperature unless otherwise specified.
D2A
* High current capability
* High surge current capability
* High reliability
* High efficiency
* Low power loss
* Low cost
* Low forward voltage drop
* Case : D2A Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 0.645 gram
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING
SYMBOL
0.161 (4.1)
0.154 (3.9)
0.040 (1.02)
0.0385 (0.98)
1.00 (25.4)
MIN.
0.284 (7.2)
0.268 (6.8)
1.00 (25.4)
MIN.
Dimensions in inches and ( millimeters )
UNITS
Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 70 80 90 100 Volts
Maximum RMS Voltage VRMS 14 21 28 35 42 49 56 63 70 Volts
Maximum DC Blocking Voltage VDC 20 30 40 50 60 70 80 90 100 Volts
Maximum Average Forward Current
0.375", 9.5mm Lead Length See Fig.1 IF(AV) 5.0 Amps.
Peak Forward Surge Current, 8.3ms single half sine wave
superimposed on rated load (JEDEC Method) IFSM 150 Amps.
Maximum Forward Voltage at IF = 5 Amps. (Note 1) VF 0.5 0.67 0.79 Volt.
Maximum Reverse Current at Ta = 25 °C
Rated DC Blocking Voltage (Note 1) Ta = 100 °C
Junction Temperature Range TJ - 65 to + 125 - 65 to + 150
Storage Temperature Range TSTG - 65 to + 150
(1) Pulse Test : Pulse Width = 300 µs, Duty Cycle = 2%.
IR 0.5 mA
IR(H) 50 25 mA
°C
°C
UPDATE : MAY 10, 1999
RATING AND CHARACTERISTIC CURVES ( SB520S - SB5B0S )
FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
SB550S
SB580S
SB590S
SB5B0S
THRU
SB5B0S
CURRENT, AMPERES
PEAK FORWARD SURGE
NUMBER OF CYCLES AT 60Hz
TJ= 100 °C
SB520S
SB530S
AMPERES
AVERAGE FORWARD CURRENT,
0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100
LEAD TEMPERATURE, (°C)
FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS
20
SB520S
SB530S
SB540S
SB550S
SB560S
SB570S
TJ = 25 °C
FORWARD CURRENT, AMPERES
0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1
PULSE WIDTH = 300µs
DUTY CYCLE = 2%
FORWARD VOLTAGE, VOLTS
0.01
REVERSE CURRENT, MILLIAMPERES
0
40 60
20
80
100 140
PERCENT OF RATED REVERSE
VOLTAGE, (%)
120