EIC FBR600, FBR610, FBR608, FBR606, FBR604 Datasheet
...
FBR600 - FBR610
FAST RECOVERY
BRIDGE RECTIFIERS
PRV : 50 - 1000 Volts
FEATURES :
MECHANICAL DATA :
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25
°
C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
FBR
600
FBR
601
FBR
602
FBR
604
FBR
606
FBR
608
FBR
610
I2t64A2S
Notes :
1 ) Measured with I
F
= 0.5 Amp., I
R
= 1 Amp., Irr = 0.25 Amp.
2 ) Thermal resistance from Junction to Case with units mounted on a 6" x 5.5" x0.11" ( 15 x 14 x 0.3 cm ) Al. plate.
Io : 6.0 Amperes
* High case dielectric strength
* High surge current capability
* High reliability
* Low reverse current
* Low forward voltage drop
* Fast switching for high efficiency
* Ideal for printed circuit board
* Case : Reliable low cost construction
utilizing molded plastic technique
* Epoxy : UL94V-O rate flame retardant
* Terminals : Plated lead solderable per
MIL-STD-202, Method 208 guaranteed
* Polarity : Polarity symbols marked on case
* Mounting position : Any
* Weight : 3.6 grams
BR6
0.445 (11.30)
0.405 (10.30)
φ
0.158 (4.00)
0.142 (3.60)
0.127 (3.20)
0.047 (1.20)
0.042 (1.06)
0.038 (0.96)
0.27 (6.90)
0.23 (5.80)
+
AC
Dimension in inches and (millimeters)
AC
0.62 (15.75)
0.58 (14.73)
0.75 (19.1)
Min.
RATING
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS Voltage V
Maximum DC Blocking Voltage V
Maximum Average Forward Current Tc = 50 °C I
Peak Forward Surge Current Single half sine wave
Superimposed on rated load (JEDEC Method) IFSM 150 Amps.
Current Squared Time at t < 8.3 ms.
Maximum Forward Voltage drop per Diode at IF = 3.0 Amps. V
Maximum DC Reverse Current Ta = 25 °C I
at Rated DC Blocking Voltage Ta = 100 °C IR(H) 1.0 mA
Maximum Reverse Recovery Time (Note 1) Trr 150 250 500 ns
Typical Thermal Resistance per diode (Note 2) RθJC 8
Operating Junction Temperature Range T
Storage Temperature Range T
SYMBOL
RMS
DC
F(AV)
F
R
J
STG
35 70 140 280 420 560 700 Volts
50 100 200 400 600 800 1000 Volts
6.0 Amps.
1.3 Volts
10
- 50 to + 150
- 50 to + 150
UPDATE : APRIL 21, 1998
UNIT
µ
A
°
C/W
°
C
°
C
RATING AND CHARACTERISTIC CURVES ( FBR600 - FBR610 )
FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
+
FIG.2 - DERATING CURVE FOR OUTPUT
FIG.3 - MAXIMUM NON-REPETITIVE PEAK
RECTIFIED CURRENT
FORWARD SURGE CURRENT
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
120
+ 0.5
- 0.25
- 1.0 A
1
50
Ω
10
Ω
Trr
D.U.T.
50 Vdc
(approx)
1 Ω
NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF.
2. Rise time = 10 ns max., Source Impedance = 50 ohms.
3. All Resistors = Non-inductive Types.
OSCILLOSCOPE
( NOTE 1 )
CURRENT, AMPERES
AVERAGE FORWARD OUTPUT
60Hz RESISTIVE OR INDUCTIVE LOAD
0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100
CASE TEMPERATURE, ( °C)
PULSE
GENERATOR
( NOTE 2 )
150
CURRENT, AMPERES
PEAK FORWARD SURGE
SET TIME BASE FOR 50/100 ns/cm
Tc = 55 °C
NUMBER OF CYCLES AT 60Hz
FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.5 - TYPICAL REVERSE CHARACTERISTICS
PER DIODE PER DIODE
100
Pulse Width = 300 µs
2% Duty Cycle
10
1.0
TJ = 25 °C
REVERSE CURRENT,
0.1
FORWARD CURRENT, AMPERES
0.01
0
2.0
FORWARD VOLTAGE, VOLTS
10
TJ = 100 °C
1.0
0.1
MICROAMPERES
0.01
PERCENT OF RATED REVERSE
VOLTAGE, (%)
TJ = 25 °C
140
Loading...