Eemax MT004120T, MT005240T, MT007240T, MT010240T, MT008277T User Manual
...
SPECIFICATIONS
electric tankless hot water heater
The First Ever Thermostatic Temperature Controlled Heater With Code Compliant Integrated Mixing Valve
EEMAX ACCUMIX MT UNITS
• PLUMBING ORIENTATION: 3/8” Compression
Fittings at TOP of the Unit
• Eemax Exclusive Turnkey Solution
• Integrated Mixing Valve Meets ASSE 1070-2004
• Meets UPC 413.1 Requirements When
Properly Installed
• No Scalding or Temperature Spikes
• Factory Calibrated Mixing Valve and Thermostatic
Temperature Control Board for Accuracy
• Product Performance Test Indicator Light
• 99% Energy Efcient Reducing Your Utility Costs
• Quick and Easy Installation –– Integrated Valve
Solution
• On-Demand Hot Water –– Never Run Out
• Factory Temperature Set to 105˚F
• 0.3 GPM Turn On
• Quick Temperature Ramp Up Time
• Compatible with All Sensor and Non-Sensor Faucets
EEMAX ACCUMIX MB UNITS
• PLUMBING ORIENTATION:
Fittings at BOTTOM of the Unit
• Eemax Exclusive Turnkey Solution
• Integrated Mixing Valve Meets ASSE 1070-2004
• Meets UPC 413.1 Requirements When
Properly Installed
• No Scalding or Temperature Spikes
• Factory Calibrated Mixing Valve and Thermostatic
Temperature Control Board for Accuracy
• Product Performance Test Indicator Light
• 99% Energy Efcient Reducing Your Utility Costs
• Quick and Easy Installation –– Integrated Valve
Solution
• On-Demand Hot Water –– Never Run Out
• Factory Temperature Set to 105˚F
• 0.3 GPM Turn On
• Quick Temperature Ramp Up Time
• Compatible with All Sensor and Non-Sensor Faucets
1/2” Compression
MODEL VOLTS kW AMPS
MT004120T 120 3.5 29A
MT005240T 240 4.8 20A
MT007240T 240 6.5 27A
MT010240T 240 9.5 40A
MT008277T 277 8.0 29A
MT010277T 277 10.0 40A
MODEL VOLTS kW AMPS
MB004120T 120 3.5 29A
MB005240T 240 4.8 20A
MB007240T 240 6.5 27A
MB010240T 240 9.5 40A
MB012240T 240 11.5 50A
MB008277T 277 8.0 29A
MB010277T 277 10.0 40A
MT VERSION
MB VERSION
QUALITY FEATURES
• Cut Energy Waste - Flow switch activates heater only
on demand (no standby heat loss) – 99% efcient.
• Save Water - “Point of Use”.
• Integrated Mixing Valve Solution.
• Continuous Hot Water – no storage capacity to run out.
• Easy Installation – only one cold or hot water line is
needed for installation – integral compression ttings
for 1/2” pipe on BOTTOM or 3/8” on TOP.
• Reduces Calcification, Liming and Sedimentation.
353 Christian Street, Oxford, CT 06478
(800) 543-6163 info@eemaxinc.com
eemax.com
• Reduces Installation Cost and Material – No T & P
relief valve needed (check local codes).
• Compact Size – Dimensions 13.5” H x 5” W x 4” D, weight 8 lbs.
• Field Serviceable Element – Replaceable cartridge element
(1 year warranty).
• Warranty – Heaters are guaranteed against failure due to leaks of
“Heater Body/Element Assembly” for a period of FIVE YEARS.
• High Temperature Limit Switch (ECO) – protects against element burn
out, with reset button.
• ADA Compliant
LEAD
N
* The wetted surface of this product contacted by water contains less than
0.25% lead and meets California and Vermont Lead Free laws.
PATENT PENDING TECHNOLOGY
SPECIFICATIONS
VOLTAGE
MT PRODUCT LINE
MT004120T
MT005240T
MT007240T
MT010240T
MT008277T
MT010277T
MB PRODUCT LINE
MB PRODUCT LINE
MB004120T
MB005240T
MB007240T
MB010240T
MB012240T
MB008277T
MB010277T
120
240*
240*
240*
277
277
120
240*
240*
240*
240*
277
277
The First Ever Thermostatic Temperature Controlled Heater With Code Compliant Integrated Mixing Valve
POWER (kW)
# AERATORS SUPPLIED/UNIT
3/8” COMPRESSION FITTINGS AT TOP OF UNIT
–
3.5
4.8
6.5
9.5
8.0
10.0
3.5
4.8
6.5
9.5
11.5
8.0
10.0
1
29A
1
20A
2
27A
3
40A
2
29A
3
40A
1/2” COMPRESSION FITTINGS AT BOTTOM OF UNIT
–
–
1
29A
1
20A
2
27A
3
40A
4
50A
2
29A
3
40A
*240V units can be used on 208V with 25% reduced temperature output.
SUPPLY CIRCUITS REQUIRED
10AWG
12AWG
10AWG
8AWG
10AWG
8AWG
10AWG
12AWG
10AWG
8AWG
6AWG
10AWG
8AWG
TURN-ON (GPM)
RECOMMENDED WIRE SIZE
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
MAX EFFECTIVE FLOW (GPM)
0.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
COMPRESSION FITTINGS
WATER CONNECTIONS
3/8”
Top
3/8”
Top
3/8”
Top
3/8”
Top
3/8”
Top
3/8”
Top
Bottom
1/2”
Bottom
1/2”
Bottom
1/2”
Bottom
1/2”
Bottom
1/2”
Bottom
1/2”
Bottom
1/2”
TEMP RISE AT 0.5 GPM (F)
48°
64°
89°
––
––
––
48°
64°
89°
––
––
––
––
TEMP RISE AT 1.0 GPM (F)
––
––
31°
21°
44°
30°
65°
43°
55°
36°
68°
46°
24°
16°
31°
21°
44°
30°
65°
43°
79°
52°
55°
36°
68°
46°
PRODUCT DIAGRAM (in inches)
TEMP RISE AT 1.5 GPM (F)
5.1 2.7
13.4
13.4
5.1
6.8
13.4
4.1
2.2
2.2
4.1
6.8
2.4
2.4
13.4
2.7
SUGGESTED SPECIFICATION
Tankless Water Heater shall be an Eemax Thermostatic Model, with digital microprocessing temperature
control capable of maintaining outlet temperature of +/– 1°F accuracy, and uses an ASSE 1070 approved
integrated mixing valve,
__________________, with _______________ kW, _________ vac, and _________ to heat _________ GPM @ a
MODEL # VOLTAGE
temperature rise of ____ degrees F. Unit shall have ABS-UL 94Vo rated cover. Element shall be replaceable
cartridge insert. Unit shall have replaceable lter in the inlet connector. Element shall be iron free, Nickel
Chrome material. Heater shall be tted with 1/2” pipe compression nuts (5/8” OD) or 3/8” sleeves, to
eliminate need for soldering. Maximum operating pressure of 150 PSI. Hot water storage tanks prohibited.
Unit shall be Eemax or approved equal.
kW RATING AMPERAGE
EEMAX SUBMITTAL
Engineer/Architect: _______________________________________________________________________________
Job Name/Customer: _____________________________________________________________________________
Location: ________________________________________________________________________________________
Contractor: ______________________________________________________________________________________
Representative: ___________________________________________________________________________________
HEATER SPECIFICATIONS:
Quantity kW Voltage AMPS GPM
AccuMix Model # MB___________________ __________ __________ __________ __________ _________
AccuMix Model # MT ___________________ __________ __________ __________ __________ _________
SPECIAL DESIGN SERVICE
INQUIRIES FOR UNITS FOR UNIQUE APPLICATIONS ARE WELCOME.
CALL OUR TECHNICAL SERVICE DEPT. 1-800-543-6163.
PRODUCT SPECIFICATIONS:
Dimensions: 13.5” H x 5” W x 4” D
Weight: 8 lbs.
Cover: Steel Powder Coated
Color: Sandstone
Temperature: Factory set to 105°F
Element: Replaceable Ni Chrome cartridge insert
MT Fittings: 3/8” compression ttings at TOP of unit
MB Fittings: 1/2” compression ttings at BOTTOM of unit
UL Listed: E86887
U.S. PATENT PENDING TECHNOLOGY
WARNING: THE TEMPERATURE OF THIS HEATER
HAS BEEN EEMAX FACTORY SET AT 105°F FOR HAND
WASHING APPLICATIONS AND MUST NOT BE ADJUSTED.
TAMPERING WITH ANY ADJUSTMENTS WILL VOID
WARRANTY AND MAY CAUSE A LOSS OF COMPLIANCE
TO UNIFORM PLUMBING CODE 413.1. FOR FURTHER
INFORMATION PLEASE CONTACT OUR TECHNICAL
SUPPORT DEPARTMENT AT 1-800-543-6163.
353 Christian Street, Oxford, CT 06478
(800) 543-6163 info@eemaxinc.com
eemax.com
LEAD
N
* The wetted surface of this product contacted by water contains less than
© 2010 Eemax, Inc. All Rights Reserved. PATENT PENDING TECHNOLOGY
0.25% lead and meets California and Vermont Lead Free laws.
EX09001-16
Loading...