Eemax EX2412T, EX3012T, EX3512T, EX48T, EX55T User Manual
...
®
“THERMOSTATIC”
MICRO PROCESSING TEMPERATURE CONTROL
E
ema
X
Instant Comfort...Endless Savings
ELECTRIC TANKLESS WATER HEATERS
MODELS:
Thermostatic
Options Volts kW Amps
EX2412T S,FS,P,DR 120V 2.4kW 20A
EX3012T S,FS,P,DR 120V 3.0kW 25A
EX3512T S,FS,P,DR 120V 3.5kW 29A
EX48T EE,ML,S,P,FS,DR 240V* 4.8kW 20A
EX55T EE,ML,S,P,FS,DR 240V* 5.5kW 23A
EX65T EE,ML,S,P,FS,DR 240V* 6.5kW 27A
EX75T EE,ML,S,P,FS,DR 240V* 7.5kW 32A
EX95T EE,ML,S,P,FS,DR 240V* 9.5kW 40A
EX8208T EE,ML,S,P,FS,DR 208V 8.3kW 40A
EX60T EE,ML,S,P,FS,DR 277V 6.0kW 22A
EX80T EE,ML,S,P,FS,DR 277V 8.0kW 29A
EX90T EE,ML,S,P,FS,DR 277V 9.0kW 33A
EX100T EE,ML,S,P,FS,DR 277V 10.0kW 36A
*Units can be used at 208V with 25% reduced output.
SPECIFICATION OPTIONS
EE = Emergency Eyewash “Tepid Water” ANSI Z358.1
ML = Multiple Lavs (5.5kW - 10kW)
S = Sanitation Setting 180°
P = Photo Setting temperatures ambient to 100°
FS = Factory set temperature (ambient to 180°)
DR = External temperature control
LED temperature display (see “Digital Readout” spec sheet)
9/06
Emergency
Eye/Face Wash
Fountains
Multiple Sinks
APPLICATIONS:
• Dishwashers, Boosters (to 180°F) (S)
• Single and multiple handwash sinks maintain
precise outlet temp for one, two, or three sinks
code compliant (.5 GPM @ 105°F)(ML)
• Multi Station Modular Sinks
• Emergency eye wash fountains (EE)
• Metering and sensor faucet compatible
• Low volume shower handset (.7-2 GPM)
• Photo Processing (P)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/– 1°F
ADVANCED TECHNOLOGY • HIGHEST EFFICIENCY • DESIGNED FOR DURABILITY
QUALITY FEATURES
• Fully Adjustable Temperature Range between 100-140°.
Special settings of higher or lower range available upon
request. (see spec options)
• Eliminate Costly Mixing Valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost and Material - no T & P relief
valve needed (check local codes).
• Easy Installation - only one cold or hot water line need be
brought to installation - integral compression fittings for ¹⁄₂”
pipe (5/8” OD) on bottom (no sweat connections).
• Cut Energy Waste - flow switch activates heater only on
demand (no standby heat loss) - 99% efficient.
•
Sophisticated microprocessing temperature control (+/- 1°F).
Low Volume
Hand Shower
(.7 GPM - 2 GPM)
BOOSTER
Dishwasher
MADE IN USA
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements
• Anti-scald Protection. Reduce wide temperature fluctuation.
• Reduces Calcification, Liming and Sedimentation.
• Complies with Handicap Requirements.
• Compact Size - dimensions 10.75”x5.25”x2.87”
weight 3 lbs.
• Field Serviceable Element - replaceable cartridge element
(1 year warranty).
• Warranty - Full Factory Warranty - Heaters are guaranteed
against failure due to leaks of “Heater Body/Element
Assembly” for a period of FIVE YEARS.
• High Temperature Limit Switch - protects against element burn
out, with reset button
Boosters for Sanitation
Eemax
Tank
Water
Heater
THERMOSTAT OPTIONS
•
Standard unit has fully adjustable thermostat 100-140°
•
Higher temperature available up to 180°F upon request. (S)
•
“Digital Readout”, external temperature adjustment range
2.4 kW - 32 kW. (see “Digital Readout” spec sheet) (DR)
•
Factory set, nonadjustable thermostat available. (FS)
•
Photoprocessing unit lower temperature range ambient to 100°. (P)
•
“Tepid” warm water (60° - 95°F) for Emergency Eye
wash fountains available. Complies with ANSI Z358.1 (EE)
THERMOSTAT ACCURACY
•
Thermostatic feature maintains +/– 1°F accuracy.
•
Achieves full, pre-selected outlet temperature within
10 seconds after activation.
•
Maintains consistent temperature.
SUGGESTED SPECIFICATION
Tankless Water Heater shall be an Eemax Thermostatic
Model, with microprocessing temperature control capable of
maintaining outlet temperature of +/– 1°F accuracy,
_____________________, with ____________________kW,
__________vac, and ________ to heat ________ GPM @ a
temperature rise of ____ degrees F. Unit shall have ABS-UL
94Vo rated cover. Element shall be replaceable cartridge
insert. Unit shall have replaceable filter in the inlet connector.
Element shall be iron free, Nickel Chrome material. Heater shall
be fitted with ¹⁄₂” pipe compression nuts (⁵⁄₈” OD) or 3/8” sleeves,
to eliminate need for soldering. Maximum operating pressure
of 150 PSI. Hot water storage tanks prohibited. Unit shall be
Eemax or approved equal.
model # kW rating
voltage amperage
RATINGS OF “THERMOSTATIC” MODELS
MODEL
EX2412T
EX3012T
EX3512T
EX48T
EX55T
EX65T
EX75T
EX95T
EX8208T
EX60T
EX80T
EX90T
EX100T
* Units can be used at 208V with 25% reduced output and amperage.
THERMOSTATIC
OPTION
S,P,FS,DR
S,P,FS,DR
S,P,FS,DR
EE,ML,S,P,FS,DR
EE,ML,S,P,FS,DR
EE,ML,S,P,FS,DR
EE,ML,S,P,FS,DR
EE,ML,S,P,FS,DR
EE,ML,S,P,FS,DR
EE,ML,S,P,FS,DR
EE,ML,S,P,FS,DR
EE,ML,S,P,FS,DR
EE,ML,S,P,FS,DR
VOLTS
120V
120V
120V
240V*
240V*
240V*
240V*
240V*
208V
277V
277V
277V
277V
kW
2.4kW
3.0kW
3.5kW
4.8kW
5.5kW
6.5kW
7.5kW
9.5kW
8.3kW
6.0kW
8.0kW
9.0kW
10.0kW
AMPS
20A
25A
29A
20A
23A
27A
32A
40A
40A
22A
29A
33A
36A
0.5 GPM
33°
41°
48°
65°
75°
89°
—
—
—
81°
—
—
—
TEMPERATURE RISE °F
0.75 GPM
22°
27°
32°
44°
50°
59°
68°
87°
76°
55°
73°
82°
91°
1.0GPM
16°
20°
24°
32°
38°
44°
51°
65°
57°
41°
55°
61°
68°
{ cold or hot water feed }
1.5 GPM
11°
14°
16°
21°
25°
30°
34°
43°
38°
27°
36°
41°
46°
2.0 GPM
8°
10°
12°
16°
19°
22°
26°
32°
28°
20°
27°
31°
34°
RECOMMENDED
10AWG
10AWG
10AWG
12AWG
10AWG
10AWG
8AWG
8AWG
8AWG
10AWG
10AWG
8AWG
8AWG
THERMOSTATIC TEMPERATURE CONTROL
SPECIFICATION OPTIONS
EE = (Emergency Eye Wash) to specify tepid water thermostatic units. Example: EX95TEE
ML = (Multiple Lavs) .5 GPM x one, two or three handwash lavs, factory set temp 105° with .5 GPM turn on (5.5kW - 10kW)
S=(Sanitation Setting) thermostat set to 180°. Example:
P=(Photo Setting) temperatures lower than 100°F. Example: EX95TP
FS = (Factory Set) temperature ambient to 180° Example:
DR = External temperature control, LED temperature display (see “Digital Readout” spec)
Flows greater than 3 GPM consult “Series Two” (T2 Models) or “Three Phase” (T3 Models) specification sheet
Example:
EX95TML {includes one, two, or three .5 GPM aerators (EX61) note quantities}
EX95TS
EX95FS 105°
2⁷⁄₈”
MINIMUM
WIRE
SIZE
SPECIFICATIONS:
Dimensions: 10.75”x5.25”x2.78”
Weight: 3 lbs.
Cover: ABS UL rated 94Vo.
Color: White
Standard temperature range 100°F-140°F
Element: Replaceable Ni Chrome cartridge insert
Fittings: 1/2” pipe compression fittings at bottom of unit. (⁵⁄₈” OD)
UL Listed: E86887 (M)
U.S. Patent #’s: 4,762,980 and 4,960,976
SPECIAL
DESIGN
SERVICE
INQUIRIES FOR UNITS FOR UNIQUE
APPLICATIONS ARE WELCOME. CALL
OUR TECHNICAL SERVICE DEPT.
1-800-543-6163
Eemax® Inc.
353 Christian St., Oxford, CT 06478
Engineer/Architect: ______________________________________________________________
Job Name/Customer: ____________________________________________________________
Location: ______________________________________________________________________
Contractor: ____________________________________________________________________
Representative: _________________________________________________________________
HEATER SPECIFICATIONS:
Option Quantity kW Voltage AMPS GPM
Thermostatic Model # EX______T ________ ________ _______ _______ ______ ____
www.eemax.com
EEMAX SUBMITTAL
Telephone: (203) 267-7890
Toll Free: 1-800-543-6163
Fax: (203) 267-7975
Loading...