AI-1001W V2/V3
User Manual
09-2018 / v1.0
Content
I Installation Reminder / Safety Guide ..................................................... 1
II Cleaning the Unit .................................................................................. 2
II-1 Air Pump Cleaner........................................................................................... 2
II-2 Dust-off Canned Compressed Air .................................................................. 3
III Product Information .............................................................................. 4
III-1 Package Content ............................................................................................ 4
III-2 LED Indicator ................................................................................................. 4
IV Installation ............................................................................................ 5
IV-1 Downloading the App.................................................................................... 5
IV-2 Site Survey ..................................................................................................... 5
IV-2-1 Android OS .............................................................................................. 6
IV-2-2 iOS ........................................................................................................... 7
IV-3 Connecting AI-1001W V2/V3 to the Internet ................................................ 8
V Using EdiGreen App .............................................................................. 13
V-1 Options ........................................................................................................ 13
V-1-1 Location Filter ....................................................................................... 13
V-1-2 Push Notification .................................................................................. 14
V-1-3 Add New Device.................................................................................... 15
V-1-4 Information ........................................................................................... 21
V-2 All List .......................................................................................................... 22
V-2-1 Search AI-1001W V2/V3 ....................................................................... 24
V-2-2 Selecting An AI-1001W V2/V3 .............................................................. 24
V-2-3 Added AI-1001W V2/V3 ....................................................................... 25
V-2-4 Other AI-1001W V2/V3 ......................................................................... 28
V-3 All Map ........................................................................................................ 30
V-4 Favorite List ................................................................................................. 31
V-5 Favorite Map ............................................................................................... 33
VI Reset to Factory Default Settings .......................................................... 34
VII Replace PM 2.5 Sensor ......................................................................... 35
VIII Wall-Mount Stand Installation ............................................................. 36
IX FAQs .................................................................................................... 37
I Installation Reminder / Safety Guide
For effective sensing and retrieval of environmental data, please install the
unit in semi-outdoor spaces with certain safety restrictions outlined below:
Must be in locations with good air circulation.
Must be vertically positioned for proper air intake to achieve cross
ventilation.
The air inlet must be kept clear and should be rechecked regularly.
Must be in locations close to a power supply and have good Wi-Fi internet
signal capable of connecting to the Internet.
Must be in well ventilated semi-outdoor spaces such as eaves of a house,
verandah, balcony, porch, covered patios, etc..
Must not be installed in locations that are subject to extremes of humidity
or temperature such as near fire or other heat sources.
Must not be installed in locations that are subject to extreme weather
conditions such as typhoon, heavy rain or dust storm; or it must be
sheltered from the conditions.
Must not be installed in locations directly exposed to sunlight or reflected
light source.
Must not be installed in corrosive environments such as in environments
with salty, acidic or basic air, or places with storage of corrosive liquids.
Must be placed at least 100cm above ground.
Do not inject gas, contaminants, or smoke directly into the unit.
It is recommended to keep a 150m distance between each unit to achieve
map positioning and air quality data accuracy.
If you wish to monitor a specific location, please also follow the restrictions
above.
If you have any questions, please contact our technical support via email:
service@edimax.com.tw.
1
Figure 1a. AI-1001W V2
Figure 2a. AI-1001W V2
II Cleaning the Unit
Choose either of the two options below depending on the cleaning tool you
have.
If you have other pump-like cleaning tools available (e.g. for computers),
you may also utilize them. Please be careful to not exert extremes of
force or temperature / humidity onto the sensors to prevent damaging
them.
It is recommended to clean the sensors every 3-6 months for maximum
sensor functionality.
II-1 Air Pump Cleaner
A general air pump cleaner of maximum diameter 55mm and length 150
mm will be sufficient.
1. Direct the nozzle of the air pump cleaner at an opening (Figure 1 or
Figure 2) of a sensor.
2. Squeeze the bulb to blow air at the sensors.
3. Do this for 5-10 times and make sure all sensor openings are cleaned.
Figure 3b. AI-1001W V3 Figure 4b. AI-1001W V3
2
Figure 5a. AI-1001W V2
Figure 6a. AI-1001W V2
II-2 Dust-off Canned Compressed Air
A general dust-off compressed air will be sufficient.
1. Direct the nozzle of the compressed air at an opening (Figure 5 or Figure
6) of a sensor.
2. Keep the nozzle at 10cm from the sensor opening.
3. Use short bursts (1-2 seconds) of air spray a few times to clean the
sensor.
4. Make sure all sensor openings are cleaned.
Figure 3b. AI-1001W V3 Figure 4b. AI-1001W V3
3
AI-1001W V2/V3
USB Cable
Quick Installation
Guide
CD with User
Manual
Cable Ties
Screws (V2 only)
Power Adapter
Mounting
Bracket (V3 only)
LED
Color
LED Status
Description
Status
Red
On
AI-1001W V2/V3 is booting up
Flashing
AI-1001W V2/V3 is waiting for setup
Off
AI-1001W V2/V3 setup completed
Wi-Fi
Green
On
AI-1001W V2/V3 Wi-Fi connected
Flashing
AI-1001W V2/V3 Wi-Fi active but not connected
Internet
Green
On
AI-1001W V2/V3 is connected to Internet
Flashing
AI-1001W V2/V3 is not connected to Internet
All LED
(Power)
Off
AI-1001W V2/V3 is not powered
III Product Information
III-1 Package Content
III-2 LED Indicator
4
iOS
Android
IV Installation
This section will guide you through the steps to connect your AI-1001W V2/V3
to the Internet.
IV-1 Downloading the App
1. Search and download "EdiGreen" in Apple App Store or Google Play.
Alternatively, scan the QR code below (choose your device's OS
correctly).
IV-2 Site Survey
Before deploying your AI-1001W V2/V3, please do a site survey on the
Internet Wi-Fi signal at the desired deployment location. This will ensure that
the AI-1001W V2/V3 can remain connected to the Internet for up-to-date
sensor data transfer.
The best location for your AI-1001W V2/V3 is outdoor with shelter/cover
from rain. The unit is water-resistant but not water-proof. Screw and cable tie
sets are also included to help mount the device to a wall if you wish.
5
IV-2-1 Android OS
1. Please bring your android smart device to the desired deployment
location.
2. Go to the Wi-Fi page on your android device (e.g. Settings Wi-Fi).
3. Please find your desired Wi-Fi connection and check the signal strength
icon.
If the icon displays 2 bars or more signal strength, please go to the next
section.
If the icon displays 1 bar or no signal strength, please consider changing
the desired deployment location and go through the steps outlined in
this section again.
6
IV-2-2 iOS
1. Please bring your iOS smart device to the desired deployment location.
2. Go to the Wi-Fi page on your iOS device (e.g. Settings Wi-Fi).
3. Please find your desired Wi-Fi connection and check the signal strength
icon.
If the icon displays 2 bars or more signal strength, please go to the next
section.
If the icon displays 1 bar or no signal strength, please consider changing
the desired deployment location and go through the steps outlined in
this section again.
7
Please make sure…
A. "Access to my location" is turned on.
B. Your mobile device is able to connect to your
home's Wi-Fi network (such as the "test" network
shown on the right) or whichever network you
anticipated the AI-1001W V2/V3 to connect to.
Please make sure this network has internet
connectivity.
IV-3 Connecting AI-1001W V2/V3 to the Internet
1. Please plug the power adapter to a power socket and connect the
AI-1001W V2/V3 (demonstrated on the left) using the USB cable. The red
status LED will turn on.
2. Please wait a moment for the device to boot up (red status LED will stay
on during boot up). The red status LED will start flashing to indicate it is
waiting for setup. Proceed to the next step when the System Status LED
starts flashing in Red.
8
3. For iOS users, go to your device’s Wi-Fi settings and connect to your
AI-1001W V2/V3’s SSID (PM2.5_Setup_**). The last two characters are
unique to your device.
Open the EdiGreen app and continue at Step 6.
4. For Android users, open the EdiGreen app and a privacy statement will
be displayed once (This privacy statement appears once only when
EdiGreen is opened for the first time), tap “YES” to continue, then tap
the icon on the top right corner of the screen.
9
5. Select Add New Device and select your AI-1001W V2/V3
(PM2.5_Setup_**), from the Available wireless device list. The last two
characters are unique to your device.
6. The app will prompt you to enter a new device name and password for
better security. Tap the > icon to continue.
After setup, you can use this new name and password to login, including
from a second device.
10
7. Select your Wi-Fi network from the list and, where applicable, enter the
Wi-Fi password. Tap the > icon to complete setup.
If you cannot find the desired Wi-Fi network SSID, tap to refresh
network list.
If you are still unable to find the desired network due to complex Wi-Fi
network environment, try manual connect by tapping "Connect to a hidden
network", select the security type and, where applicable, enter the
password.
8. Setup is complete. Your AI-1001W V2/V3 will be listed in the All and
Favorite Lists and Maps. You can tap on any AI-1001W V2/V3 for more
detailed data, and create a list of favorites. Explore the app!
11
You can also connect to your AI-1001W V2/V3 on a second Wi-Fi device.
Just download the app and add it in the same way. If you’re connected to
a different Wi-Fi network, then select “Add one manually” and input the
MAC address printed on the AI-1001W V2/V3 label.
12
Loading...