Edimax BR-6435nD Datasheet

N600+ Wireless Concurrent

Dual-Band Router

Concurrent Dual-Band Wi-Fi Connectivity

The Edimax BR-6435nD provides simultaneous 2.4GHz and 5GHz wireless network connectivity for maximum
flexibility of use. This router allows users to use general network applications like web surfing via the 2.4GHz
bandwidth and stream HD video and other media through the 5GHz bandwidth at the same time.

iQ Setup

iQ Setup is a smart feature of Edimax routers that allows even the most inexperienced users to set up an
Edimax router quick and effortlessly. After the appropriate cable connections are made, all you need to do is to
open your iPhone or computer’s web browser and iQ Setup will start detecting your Internet connection type
automatically. With iQ Setup, most of the setup process is done automatically. Little to no configuration is

required on the users’ part and no installation CD is necessary.

Wireless 802.11n Standard (data rates up to 300Mbps)

The Edimax BR-6435nD is a high-speed solution that complies with IEEE 802.11a/b/g/n standards. The latest
wireless technology is built into this router to broaden its wireless coverage by 5 times and to reduce dead
spots within the wireless range. When it is connected to wireless 802.11n and 802.11a compatible devices, the
BR-6435nD can achieve transmission rates of up to 300Mbps on both 5GHz and 2.4GHz bands.

WPS (Wi-Fi Protected Setup) Button & Built-in Wi-Fi On/Off Switch

The Edimax BR-6435nD allows users to build secure connections with WPS enabled wireless devices simply by
pressing the WPS button. There is no need to go through the hassle of setting up and configuring the security
of your wireless network. With the built-in Wi-Fi on/off switch, users can also easily switch on/off the wireless
connection without logging into the user interface. The Wi-Fi on/off switch provides users an easy way to save
electricity by switching the Wi-Fi signal off when it is not in use.

BR-6435nD

FEATURES & TECHNICAL SPECIFICATIONS

FUNCTIONS HARDWARE INTERFACE MANAGEMENT

Supports AP, AP client, AP bridge, WDS, and
universal repeater modes

Port triggering for special applications
DDNS and SIP
Virtual server and DMZ hosting
MAC/IP filter and URL blocking
Static routing
UPnP architecture
VPN pass-through (IPSec/PPTP)
Schedule control

1 x RJ-45 WAN port
4 x RJ-45 LAN port
LED indicators: power, wireless, WAN, LNK/ACT
2 x 3dBi dual-band antenna
WPS/Reset button
Wireless on/off switch

12-language user interface
Supports remote management
System status and security log
Firmware upgradable

WAN SECURITY OUTPUT POWER

Supports WISP connection mode
Supports RJ-45 cable/xDSL modems

WAN protocol: PPPoE, static IP, PPTP, dynamic IP,
L2TP

NAT/NAPT IP sharing
64/128-bit WEP encryption and WPA-PSK,
WPA2-PSK security
DHCP server/client
QoS for critical operations
SPI anti-DoS firewall

2.4GHz
11n: 13±1.5dBm

11g: 14±1.5dBm
11b: 16±1.5dBm

5GHz
11n: 11±1.5dBm

11a: 11±1.5dBm

MEMORY INSTALLATION HUMIDITY & TEMPERATURE

4MB NOR Flash
32MB RAM

iQ Setup supported 10-90% (non-condensing)

0-40oC

POWER ADAPTER DIMENSIONS CERTIFICATIONS

DC 5V

134 (W) x 110 (D) x 26 (H) mm CE, FCC

www.edimax.com