EDIMAX BR-6208AC User guide [pt]

BR-6208AC

Guia de instalação rápida

03-2014 / v1.0

Conteúdo da embalagem

Cabo Ethernet

Transformador

CD-ROM

Guia de instalação rápida

BR-6208AC

Antes de utilizar este produto, verifique se existe algum item em falta na
embalagem e contacte o seu fornecedor para reclamar o(s) item(ns) em falta:

1

Instalação

1. Ligue o transformador incluído na porta de alimentação CC do dispositivo e

a outra extremidade numa tomada de parede.

2. Certifique-se de que o interruptor de ligar/desligar Wi-Fi está definido

como ligado e que os três LED (alimentação, Wi-Fi de 2,4GHz e 5GHz) estão
acesos.

2

3. Utilize um dispositivo Wi-Fi (por exemplo, computador, tablet, smartphone)

para procurar uma rede Wi-Fi com o SSID “edimax.setup” e ligá-lo.

É necessário o iOS 4 ou o Android 4 e superior para a instalação
num smartphone ou tablet.

4. Abra um Web browser e se o ecrã “Introdução” indicado abaixo não

aparecer automaticamente, introduza o URL http://edimax.setup e clique
em “Introdução” para iniciar o processo de instalação.

Se não conseguir aceder a http://edimax.setup, certifique-se de
que o dispositivo Wi-Fi está definido para utilizar um endereço IP
dinâmico. Isto é um procedimento simples, as instruções passo a
passo necessárias para efectuá-lo num computador estão
disponíveis no manual do utilizador.

3

Modo Router Wi-Fi

O dispositivo é ligado ao modem e fornece
acesso de 2,4GHz e/ou 5GHz (sem fios e
Ethernet) à Internet aos seus dispositivos de rede.

Modo de ponto de
acesso

O dispositivo é ligado a um router através do
cabo Ethernet e fornece acesso de 2,4GHz e/ou
5GHz (sem fios e Ethernet) à Internet aos seus
dispositivos de rede.

Modo Extensão de
alcance

O dispositivo é ligado sem fios à sua rede de
2,4GHz e/ou 5GHz e repete o(s) sinal(ais) sem
fios.

Modo Bridge sem fios

O dispositivo estabelece ligação a um dispositivo
de rede, por exemplo: TV, consola de jogos ou
leitor de multimédia através do cabo Ethernet e
funciona como receptor sem fios, o que permite
ao dispositivo de rede aderir à sua rede Wi-Fi.

Modo WISP

O dispositivo estabelece uma ligação sem fios ao
Fornecedor de serviços Internet sem fios e
fornece acesso de 2,4GHz e/ou 5GHz (sem fios e
Ethernet) à Internet aos seus dispositivos de rede.

5. Escolha se pretende utilizar o BR-6208AC no modo de router Wi-Fi

predefinido ou num modo diferente.

Os cinco modos disponíveis do modelo BR-6208AC são indicados abaixo:

4

6. Siga as instruções no ecrã para concluir a configuração. Se necessitar de

mais ajuda, consulte o manual do utilizador.

Router Wi-Fi:

Outros modos:

5

Interface de configuração baseada num browser

Após a configuração, pode aceder à interface de configuração baseada num
browser para configurar ou alterar as definições do BR-6208AC. Para aceder à
interface de configuração baseada num browser, introduza
http://edimax.setup na barra de URL de um Web browser num dispositivo de
rede ligado ao modelo BR-6208AC.

Se não conseguir aceder a edimax.setup, ligue o BR-620AC a um
computador utilizando um cabo Ethernet e tente de novo.

Será apresentada uma mensagem para introduzir o nome de utilizador e a
palavra-passe. O nome de utilizador predefinido é “admin” e a palavra-passe
predefinida é “1234”.

Será apresentado o ecrã "Status" (Estado) indicado abaixo. Utilize o menu no
lado esquerdo para navegar. Para obter mais informações, consulte o manual
do utilizador.

6

Resolução de problemas

1. No modo de extensão de alcance, o meu BR-6208AC é de banda

dupla?

a. Sim. O BR-6208AC tem capacidade para abranger sinais de Wi-Fi de 2,4GHz e

5GHz em simultâneo, mas é necessário ligar o BR-6208AC a cada rede (de
2,4GHz e 5GHz) em separado durante a iQ Setup. Durante a iQ Setup, ser-lhe-á
solicitado para escolher as redes Wi-Fi de 2,4GHz e 5GHz Wi-Fi que pretende
abranger, assim como especificar um novo SSID (nome) e palavra-passe para
cada uma das redes para as quais o BR-6208AC irá transmitir/abranger.

Pode desactivar a Wi-Fi de 2,4GHz ou 5GHz durante a iQ Setup se
não estiver disponível uma rede de origem adequada ou se não
quiser utilizá-la. Se a banda de frequência de 2,4GHz ou 5GHz
estiver desactivada, os clientes/dispositivos sem fios na mesma
banda de frequência não poderão estabelecer ligação à sua
extensão de alcance.

2. No modo de extensão de alcance, se o meu BR-6208AC estiver

configurado como uma extensão de banda dupla, o que acontece
se estabelecer ligação a um cliente Ethernet com fios?

a. Quando liga um dispositivo de rede ao BR-6208AC no modo de extensão de

alcance através do cabo Ethernet, por predefinição, o dispositivo de rede
estabelece ligação à rede de 5GHz. Se não estiver disponível uma rede de 5GHz,
o dispositivo de rede estabelece ligação à rede de 2,4GHz.

3. No modo de extensão de alcance, como posso ligar a uma rede

com um SSID oculto?

7

a. Durante a iQ Setup, pode introduzir manualmente um SSID no campo “Wi-Fi

Nome da rede Wi-Fi

Introduza o SSID (nome da rede) da rede oculta
existente.

SSID da extensão de
alcance

Introduza um SSID para o BR-6208AC ou deixe-o
em branco para utilizar um predefinido que
consista no SSID do seu router (acima) +"_2EX".

Encriptação

Seleccione e introduza as informações de
encriptação da sua rede oculta.

network name” como indicado abaixo, tanto para 2,4 GHz como para 5 GHz,
assim como as informações de encriptação relevantes.

4. O que indicam os LED?

Os LED podem ser identificados pelos ícones na parte inferior do BR-6208AC.

8

LED

Cor

Estado do LED

Descrição

Potência

Branco

Ligado

O BR-6208AC está ligado.

Desligado

O BR-6208AC está desligado.

Internet

Azul

Ligado

A ligação à Internet está pronta.

Intermitente

Estado predefinido de origem, o
cabo Ethernet não está ligado ou
não há ligação à Internet.

Wi-Fi de 2,4GHz

Azul

Ligado

Actividade sem fios Wi-Fi de
2,4GHz (transferência/recepção
de dados).

Intermitente

A WPS de 2,4GHz está activada.

Desligado

A Wi-Fi de 2,4GHz não está
activada.

Wi-Fi de 5GHz

Azul

Ligado

Actividade sem fios Wi-Fi de
5GHz (transferência/recepção de
dados).

Intermitente

A WPS de 5GHz está activada.

Desligado

A Wi-Fi de 5GHz não está
activada.

5. Não consigo aceder à Internet.

a. Certifique-se de que todos os cabos estão ligados correctamente. Experimente

um cabo Ethernet diferente.

b. Verifique se consegue aceder à interface de configuração baseada na Web. Se

não conseguir, certifique-se de que o dispositivo Wi-Fi está definido para utilizar
um endereço IP dinâmico. Se não souber como agir, utilize um computador e
consulte o manual do utilizador para ajudá-lo.

c. Inicie sessão na interface de configuração baseada na Web e vá para Internet >

Configuração WAN e verifique se o tipo de ligação está correcto. Se não tiver a
certeza qual é o tipo de ligação à Internet no seu computador, contacte o
Fornecedor de conteúdos Internet (ISP).

d. Ligue o computador directamente ao modem e verifique se consegue aceder à

Internet. Se não conseguir, contacte o fornecedor de conteúdos Internet para
obter ajuda.

9

6. Não consigo abrir a interface de configuração baseada na Web.

Início de sessão do
router

Introduza este URL num Web browser para
executar a iQ Setup ou configurar as definições
avançadas. Deve estar ligado ao dispositivo
através de Wi-Fi ou do cabo Ethernet.

Nome de
utilizador/palavra-passe

Este é o nome de utilizador e a palavra-passe
para aceder à interface de configuração
baseada em browser quando acede ao URL
“Início de sessão do router” (acima).

Nome da rede Wi-Fi

Isto é o nome da rede Wi-Fi predefinida do
dispositivo. Procure este nome (SSID) e

estabeleça ligação para aceder ao URL “Início
de sessão do router” (acima).

a. Certifique-se de que o dispositivo Wi-Fi está definido para utilizar um endereço

IP dinâmico. Se não souber como agir, utilize um computador e consulte o
manual do utilizador para ajudá-lo

7. Como repor o meu dispositivo para as predefinições de origem?

a. Para repor o dispositivo para as predefinições de origem, prima e mantenha

premido o botão WPS/Repor durante mais de 10 segundos, até o LED de
alimentação branco começar a piscar. Aguarde alguns minutos até o produto ser
reiniciado. Quando o dispositivo for reiniciado, todas as definições serão
repostas. As predefinições estão apresentadas na etiqueta do produto na parte
inferior do dispositivo, como indicado abaixo:

10

MAC

O endereço MAC é único para cada dispositivo
e é utilizado para identificação numa rede. O
endereço MAC único do seu dispositivo é
apresentado aqui.

Código PIN

Este é o código PIN do dispositivo da Wi-Fi
Protected Setup (WPS).

8. Esqueci a minha palavra-passe.

a. Reponha o router para as predefinições de origem e utilize o nome de utilizador

predefinido admin e a palavra-passe predefinida 1234. As predefinições estão
apresentadas na etiqueta do produto na parte inferior do dispositivo, como
indicado acima:

9. O sinal sem fios do meu BR-6208AC é fraco.

Os sinais fracos são normalmente causados pela interferência de outros
dispositivos ou obstáculos que bloqueiam o sinal sem fios do BR-6208AC:

a. Mantenha o dispositivo afastado de outros dispositivos de rádio, como

microondas ou telefones sem fio.

b. Não coloque o dispositivo no canto de uma sala ou debaixo/por cima de metal.
c. Certifique-se de que há o mínimo de obstáculos possíveis entre o BR-6208AC e o

dispositivo da rede sem fios.

No modo de extensão de alcance, o sinal sem fios fraco do BR-6208AC pode ser
causado por um sinal fraco do seu router. É importante escolher um local
adequado para o BR-6208AC no que respeita ao seu router sem fios. O local mais
adequado é aproximadamente no centro, entre o router sem fios e a área que
pretende que seja abrangida pelo BR-6208AC. Se tiver muito afastado do router, é
pouco provável que o BR-62080AC receba um sinal sem fios.

10. As portas Internet e de rede local funcionam da mesma maneira

quando o dispositivo está em diferentes modos?

Não, as portas de Internet e de rede local têm funções ligeiramente diferentes,
dependendo do modo de funcionamento do dispositivo.

a. No modo Router Wi-Fi, a Porta Internet serve de ligação directa ao modem xDSL.

As Portas de rede local servem para clientes de rede com fios.

b. No modo de ponto de acesso, a porta Internet não está funcional. Ligue o

router à porta de rede local do dispositivo para que as outras portas de rede
local possam estabelecer ligação aos clientes de rede sem fios.

c. No modo extensão de alcance, a porta Internet não funciona e todas as portas

11

de rede local dizem respeito a clientes de rede com fios. Não ligue o router às
portas Internet ou de rede local do dispositivo, porque pode causar uma avaria

no dispositivo.

d. No modo de bridge sem fios, a porta Internet não funciona e todas as portas de

rede local dizem respeito a clientes de rede com fios.

e. No modo WISP, a Porta Internet não funciona e todas as portas de rede local

dizem respeito a clientes de rede com fios.

12

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio technician for help.

FCC Caution

This device and its antenna must not be co-located or operating in conjunction with any other antenna or
transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Any changes or modifications not expressly
approved by the party responsible for compliance could void the authority to operate equipment.

Federal Communications Commission (FCC) Radiation Exposure Statement

This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid
the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be
less than 2.5cm (1 inch) during normal operation.

Federal Communications Commission (FCC) RF Exposure Requirements

This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and
had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65
Supplement C. The equipment version marketed in US is restricted to usage of the channels 1-11 only. This
equipment is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range.

R&TTE Compliance Statement

This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND
THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal equipment and the mutual
recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC
(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.

Safety

This equipment is designed with the utmost care for the safety of those who install and use it. However, special
attention must be paid to the dangers of electric shock and static electricity when working with electrical
equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to
ensure the safe use of the equipment.

EU Countries Intended for Use

The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI
version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and
Switzerland.

EU Countries Not Intended for Use

None

13

EU Declaration of Conformity

English: This equipment is in compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC, 2009/125/EC.

Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la

directive 1999/5/CE, 2009/125/CE.

Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními

směrnic 1999/5/ES, 2009/125/ES.

Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami

określonymi Dyrektywą UE 1999/5/EC, 2009/125/EC.

Română: Acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi relevante ale

Directivei 1999/5/CE, 2009/125/CE.

Русский: Это оборудование соответствует основным требованиям и положениям Директивы

1999/5/EC, 2009/125/EC.

Magyar: Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó irányelveknek

(1999/5/EK, 2009/125/EC).

Türkçe: Bu cihaz 1999/5/EC, 2009/125/EC direktifleri zorunlu istekler ve diğer hükümlerle ile

uyumludur.

Українська: Обладнання відповідає вимогам і умовам директиви 1999/5/EC, 2009/125/EC.
Slovenčina: Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia smerníc

1999/5/ES, 2009/125/ES.

Deutsch: Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien 1999/5/EC, 2009/125/EC.
Español: El presente equipo cumple los requisitos esenciales de la Directiva 1999/5/EC,

2009/125/EC.

Italiano: Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili

della Direttiva 1999/5/CE, 2009/125/CE.

Nederlands: Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen

van richtlijn 1999/5/EC, 2009/125/EC.

Português: Este equipamento cumpre os requesitos essênciais da Directiva 1999/5/EC, 2009/125/EC.
Norsk: Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv

1999/5/EC, 2009/125/EC.

Svenska: Denna utrustning är i överensstämmelse med de väsentliga kraven och övriga relevanta

bestämmelser i direktiv 1999/5/EG, 2009/125/EG.

Dansk: Dette udstyr er i overensstemmelse med de væ sentligste krav og andre relevante

forordninger i direktiv 1999/5/EC, 2009/125/EC.

Suomi: Tämä laite täyttää direktiivien 1999/5/EY, 2009/125/EY oleelliset vaatimukset ja muut

asiaankuuluvat määräykset.

-----------------------------------------------------------------------------------------------------------

WEEE Directive & Product Disposal

At the end of its serviceable life, this product should not be treated as household or general waste. It
should be handed over to the applicable collection point for the recycling of electrical and electronic
equipment, or returned to the supplier for disposal.

14

Declaration of Conformity

We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the
equipment described below complies with the requirements of the European R&TTE
directives.

Equipment:

AC750 Multi-Function Dual-Band Wi-Fi Router

Model No.:

BR-6208AC

The following European standards for essential requirements have been followed:

Directives 1999/5/EC

Spectrum

:

ETSI EN 300 328 V1.8.1 (2012-06);
ETSI EN 301 893 V1.7.1 (2012-06)

EMC

:

EN 301 489-1 V1.9.2 (2011-09);
EN 301 489-17 V2.2.1 (2012-09);

Safety (LVD)

:

IEC 60950-1:2005 (2nd Edition);Am 1:2009
EN 60950-1:2006+A11:2009+A1:2010+A12:2011

Recommendation19 99/5/EC

EMF

:

EN 62311:2008

Directives 2006/95/EC

Safety (LVD)

:

IEC 60950-1:2005 (2nd Edition);Am 1:2009
EN 60950-1:2006+A11:2009+A1:2010+A12:2011

Edimax Technology Co., Ltd.

No. 3, Wu Chuan 3rd Road,

Wu-Ku Industrial Park,

New Taipei City, Taiwan

Date of Signature:

March, 2014

Signature:
Printed Name:

Albert Chang

Title:

Director
Edimax Technology Co., Ltd.

15

Notice According to GNU General Public License Version 2

This product includes software that is subject to the GNU General Public License version 2. The program is free software and
distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more
than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source
code.

Das Produkt beinhaltet Software, die den Bedingungen der GNU/GPL-Version 2 unterliegt. Das Programm ist eine sog. „Free
Software“, der Autor stellt das Programm ohne irgendeine Gewährleistungen zur Verfügung. Wir bieten Ihnen für einen
Zeitraum von drei Jahren an, eine vollständige maschinenlesbare Kopie des Quelltextes der Programme zur Verfügung zu
stellen – zu nicht höheren Kosten als denen, die durch den physikalischen Kopiervorgang anfallen.

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free

for all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other

program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser
General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make
sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive
source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that
you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender
the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you
modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights
that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms
so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.

Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for
this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they
have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a
free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have
made it clear that any patent must be licensed for everyone’s free use or not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The ‘“Program’“, below, refers to any such program or work, and a

‘“work based on the Program’“ means either the Program or any derivative work under copyright law: that is to say, a work

containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the term ‘“modification’“.) Each licensee is addressed as ‘“you’“.

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The
act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a
work based on the Program (independent of having been made by running the Program). Whether that is true depends on
what the Program does.

1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that

you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep

16

intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the
Program a copy of this License along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and
copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these
conditions:

a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any

change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the

Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this
License.

c) If the modified program normally reads commands interactively when run, you must cause it, when started

running for such interactive use in the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty)
and that users may redistribute the program under these conditions, and telling the user how to view a copy of
this License. (Exception: if the Program itself is interactive but does not normally print such an announcement,
your work based on the Program is not required to print an announcement.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms,
do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as
part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License,
whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote
it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent
is to exercise the right to control the distribution of derivative or collective works based on the Program.

In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the
Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under
the terms of Sections 1 and 2 above provided that you also do one of the following:

a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under

the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than

your cost of physically performing source distribution, a complete machine-readable copy of the corresponding
source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange; or,

c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This

alternative is allowed only for noncommercial distribution and only if you received the program in object code or
executable form with such an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for making modifications to it. For an executable work,
complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus
the scripts used to control compilation and installation of the executable. However, as a special exception, the source code
distributed need not include anything that is normally distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component
itself accompanies the executable.

If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even though third
parties are not compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights
under this License. However, parties who have received copies, or rights, from you under this License will not have their
licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to
modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of
this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.

17

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license
from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not
impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing
compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of
this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not
distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License
would be to refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is
intended to apply and the section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity
of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system,
which is implemented by public license practices. Many people have made generous contributions to the wide range of
software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to
decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Program under this License may add an explicit geographical distribution
limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such
case, this License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time.
Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or
concerns.

Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies
to it and ‘“any later version’“, you have the option of following the terms and conditions either of that version or of any later
version published by the Free Software Foundation. If the Program does not specify a version number of this License, you
may choose any version ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the
Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER

PARTIES PROVIDE THE PROGRAM ‘“AS IS’“ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY
OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

18

19