Edifier IF200 User Manual

IF200 Quick operation guide (prototype)

Docking your Ipod

Select socket position Select iPod model Dock your iPod Connect the power.

Setting up IF200 alarm function with your iPod.

You must finish this setup process before start to use for the 1st time, otherwise the
entire system will work rarely!

Step 1, Operate the iPod screen to main
menu, and make the “music” item selected.

(This is telling the IF200 where is the beginning of
the menu)

Step 2, Press & hold the “SNOOZE” key
until hear “double beeps” sound,

(This will start to enter the setup mode)

Step 3, Press shortly the “SNOOZE” key to
move down until highlight the “Extras” line.

(This is to tell the IF200 where the entrance of clock
screen)

Press shortly the SNOOZE key (which will cause
the selected element to move down) until it's
located over the "Extras" menu

Step 4, Long press the “SNOOZE” key until
hear 2 times “beep” again.

You will see the ipod menu start to move along to the
clock screen automatically. As shown.

Step 5, Press the “volume button” once to
finish setup.

For details about setting the alarm and clock time, refer
to your iPod’s user’s guide.

Important: There are two cases will cause unsuccessful setup process.

1. The setup mode will time up within 6 seconds if no button is pressed, the
IF200 will alert you by beeping endlessly. Then you have to restart the
setup from step 1.

2. In the step 3, the menu bar can only step downward, if you missed the
“Extras” position, please do not keep trying, just wait 6 seconds and start
over from step 1.

Using the alarm function with you iPod.

l After setup IF200 with your iPod, each time you dock your ipod, the IF200

will operate your iPod menu automatically to show the time screen.

l During your sleep, the IF200 charges your iPods battery.
l When it’s time to getup, your iPod + IF200 will play your favorite song for

you.

l If you need a little more sleep, just press the SNOOZE key once, this will

pause the music and give you a 9 minutes extra dream.

l If you are getting up now, you can resume the music by pressing the

“Volume” button.

Tips: Other usages of the “Volume” button:

l While your iPod is docked into IF200, the “Volume” button is the hotkey to

bring you back to time screen from any work mode.

l If you found this key can’t bring your iPod back to time screen, you may

need to repeat the setup procedure.

Something you may like to known:

The original project of IF200 called i-Pet, this
means you will love it as your pet. A pet has
certain characters and behavior itself, you better
first teach it how to work with your iPod, then it
will help you and bring you more satisfactions.
That’s the reason that it’ s setup process is little
common, but not hard to do, just after
configured, it will work along to free you up