TWS200
True Wireless Stereo Earbuds
www.edier.com
EN · Product Description and Accessories
Pairing button
USB charging cableCharging case
Note: Images are for illustrative purposes only and may differ from the
actual product.
■ User Guide
L
●
Charge the Earbuds
• You may hear a warning tone when at
low battery level, please place the
earbuds in the case for charging.
R
● Charge the Charging Case
•
If red light flashes six times rapidly (three
times per one second) when the case is
opened, it indicates the case has a low
battery capacity, please charge in time.
Charging time: approx. 2 hours for a full
charging.
• Red light
Rated input: 5V 35mA(earbuds)
5V 350mA(charging case)
Warning: The rechargeable batteries that
provide power for this product must be
disposed properly for recycling. Do not
dispose of batteries in fire to prevent an
explosion.
● Pairing
• Bluetooth pairing: press and
hold for 3 seconds
• TWS pairing: double press
• Clear pairing records: press and
hold for approx. 8 seconds
EDIFIER TWS200 L
EDIFIER TWS200 R
Search and connect to “EDIFIER TWS200 L”
or “EDIFIER TWS200 R”, after pairing is done,
the white light will flash twice per every
5 seconds.
• Bluetooth pairing: red and white
lights flashing rapidly
• TWS pairing: white light flashing rapidly
• Clear pairing records: white light turning
off after flashing rapidly six times
● Power on once the
case is opened.
White light steady lit for 1 second
● Functional Operation
Note: double-pressing is to pause/play/accept/end a call when only one earbud is used.
● Power o once the
case is closed.
Accept/end a call:
double press either earbud
Pause/play:
double press the right earbud
Voice assistant:
double press the left earbud
■ FAQs
Indicator light is o during charging.
• Please ensure the earbuds are correctly placed in the charging case.
No sound
• Check if the earbuds are operating.
• Check if the earbuds volume are at an appropriate level.
• Check if the earbuds are correctly connected with mobile phone.
• Check if the earbuds are operating within a normal working range.
The call quality of the earbuds are not good.
• Check if mobile phone is in an area with strong signal.
• Please ensure the earbuds are within effective distance (10m) and no
obstacle between the earbuds and mobile phone.
When playing music, cannot control pause/play via the earbuds.
• Please ensure the paired device support AVRCP (Audio/Video Remote
Control Profile) profile.
■ Maintenance
• Do not use fast charging devices to charge the product to avoid
affecting batteries’ service life.
• Please charge the product with lithium battery at least once per three
months if not used for long periods of time.
• Keep the product away from humid places to avoid affecting internal
circuit. Do not use the product during intense exercise or with much
sweat to prevent sweat from dropping into the product to make damage.
• Do not put the product in places exposed to sun or with high
temperature. High temperature will shorten service life of electronic
components, damage battery and deform plastic components.
• Do not put the product in cold places to avoid damaging internal circuit
board.
• Do not dismantle the product. Non-professional personnel may damage
the product.
• Do not drop, strongly vibrate, strike the product with hard object to
avoid damaging internal circuit.
• Do not use drastic chemicals or cleaner to clean the product.
• Do not use sharp objects to scratch product surface to avoid damaging
shell and affecting facade.
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
2019 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade, information
contained herein may be subject to change from time to time without
prior notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly different
from actual product. Images are for illustrative purposes only and may
differ from the actual product.