Page 1
TWS2
True Wireless stereo Earbuds
www.edifier.com
Page 2
■ Product Description and Accessories
Charging case Ear tips x 3 pairs USB charging cable
There are different size of ear tips attached in the package, please select the suitable ones to wear.
Note: Images are for illustrative purposes only and may differ from the actual product.
Multi-function button
Page 3
■ User Guide
⚫ Charge the Earbuds
During using, if red light instead of blue light flashes, it indicates the earbuds are at low battery level,
please use them after fully charged.
Charging: place the earbuds in the charging case
Red light steady lit=charging Red light off=fully charged
⚫ Charge the Charging Case
If one single light on the left side flashes six times rapidly, it indicates the charging case has low
battery capacity, please charge it in time.
Indicator lights respectively flashing and lighting up from left to right = charging
Indicator lights steady lit = fully charged
Rated input: 5V 60mA(earbuds) 5V 500mA(charging case)
Warning: The rechargeable batteries that provide power for this product must be disposed properly for
recycling. Do not dispose of batteries in fire to prevent an explosion.
Page 4
⚫ Power On/Off
1. Power on
• Power on automatically when taken out of the charging case;
• When without charging case, press the multi-function button to power on.
2. Power off
• Power off automatically while placed in the charging case;
• When without charging case, press and hold the multi-function button for 7 seconds to power off.
⚫ Bluetooth Connection
1. Two Earbuds Mode
• Open the charging case to take two earbuds out, they will automatically turn on and make TWS
interconnection;
• Press and hold the multi-function button of the left earbud to enter pairing state, the red and blue
lights will flash rapidly;
• Set mobile phone to search and connect to this product model, after pairing is successful, the blue
light will flash slowly.
Note: the earbuds will automatically enter Bluetooth pairing mode when used for the first time.
2. One Earbud Mode
If use one earbud only, please take the left or right earbud out of the charging case, and refer to the
procedures mentioned in“Two Earbuds Mode”to pair it with mobile phone.
⚫ TWS Pairing of the Left and Right Earbuds
The left and right earbuds have finished TWS pairing before leaving factory. If the wireless
connection fails to resume, please follow the steps below to re-pair:
• When not connected with mobile phone, take two earbuds out and respectively double press the
multi-function buttons of the left and right earbuds to enter TWS pairing state, the blue lights will
flash rapidly;
• Make two earbuds close to each other, after pairing is done the blue lights of both earbuds will
flash slowly.
⚫ Clear pairing records
Place the earbuds in the charging case, respectively press and hold the multi-function buttons of the
left and right earbuds for six seconds until the blue lights flash six times rapidly, and then the pairing
records have been cleared.
Page 5
■ Functional Operation Instructions
⚫ Music Playback Mode (same operation for the left and right earbuds)
⚫ Call Mode (same operation for the left and right earbuds)
Previous track: triple press
Next track: double press
Pause/play: single press
Enable voice assistant: press and hold for around 2 seconds
Accept/end a call: single press
End a call: single press
Decline a call: press and hold for around 2 seconds
Page 6
■ FAQs
Red light instead of blue light flashes.
• The earbuds are at low battery level, please recharge the earbuds.
Red light is off during charging.
• Ensure the earbuds are correctly placed in the charging case.
• When the earbuds have not been used for long periods of time, the battery will enter sleep state, it
needs to charge about 30 minutes and then the red light will be lit.
No sound
• Check if the earbuds are operating.
• Check if the earbuds volume are at an appropriate level.
• Check if the earbuds are correctly connected with mobile phone.
• Check if the earbuds are operating within a normal working range.
The call quality of the earbuds are not good.
• Check if mobile phone is in an area with strong signal.
• Please ensure the earbuds are within effective distance (10m) and no obstacle between the earbuds
and mobile phone.
When playing music, cannot control pause/play/previous track/next track via the
earbuds.
• Ensure the paired device support AVRCP (Audio/Video Remote Control Profile) profile.
■ Maintenance
• Keep the product away from humid places to avoid affecting internal circuit. Do not use the
product during intense exercise or with much sweat to prevent sweat from dropping into the
product to make damage.
• Do not put the product in places exposed to sun or with high temperature. High temperature will
shorten service life of electronic components, damage battery and deform plastic components.
• Do not put the product in cold places to avoid damaging internal circuit board.
• Do not dismantle the product. Non-professional personnel may damage the product.
• Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal
circuit.
• Do not use drastic chemicals or cleaner to clean the product.
• Do not use sharp objects to scratch product surface to avoid damaging shell and affecting facade.
Loading...