EdgeStar TWR125SS User Manual
Table of Contents
Table of Contents 1
Thanks and Intro 1
Important Safeguards 2
1. Specifications 3
2. Parts and Features 3
3. Operation 3
4. Troubleshooting 5
5. Limited Warranty 8
Thank you and Intro
Thank you for purchasing this EdgeStar wine cooler. Once you get this unit
set up, it will provide you and your family with years of great service.
If you are reading this owner’s manual, you’ve probably already unpacked the
unit. Note that you should save the packaging in case you need to safely
transport this wine cooler in the future.
In order to assemble this wine cooler, carefully
unpack all parts. The only assembly required is that
of the handle. In order to install the handle, you
need a phillips screwdriver, the handle, and the two
installation screws.
• Open the door of the wine cooler.
• Locate the two screw holes on the inside of
the door (they may be partially obscured by
the door liner gasket.) If the gasket obscures
the screw holes, gently pull that section of the
gasket out of the door.
• Insert the screws into the holes. They should
now poke out of the front of the door.
• Line up the holes in the handle with the
screws and give each screw about 2-4 full
turns into the handle.
• Now screw the screws in all the way, reset the gasket into the door (if
you removed it) and your handle is installed!
After you get the handle installed, make sure that your wine cooler is fully
unpacked, and position it where you want it to go (remember, for the best
conditions for your wine, choose a spot in a cool (room temperature) area, out
of the sun, and with about 2-4” around all sides and the back for adequate
ventilation. Make sure the unit is set on a sturdy surface that can support its
weight. Note that you can screw in and out the legs to level the unit. You may
also want to clean the interior with a solution of mild soap and water and a
damp cloth. Then plug the unit in, set the temperature, and fill it with wine.
At what temperature should you set the wine cooler? Some of the experts
differ in their opinions, but we recommend low to mid 50’s (F) for whites and
mid 60’s (F) for reds. Enjoy!
Note: Your door and
handle may appear
different than pictured
1
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should always be
followed, including the following:
BEFORE USE, PLEASE READ AND FOLLOW ALL INSTRUCTIONS FOR
THIS WINE COOLER
• Do not use if the power supply cord is damaged. If damaged, it must be
replaced by the manufacturer or a similarly qualified person.
• This wine cooler is not intended for use by young children or infirm
persons without supervision. Young children must be supervised to
ensure they do not play with the appliance.
• Ensure the cooler is unplugged before cleaning or if not in use.
• To clean the cooler use only mild detergents or glass cleaning
products. Never use harsh detergents or solvents.
• It is not recommended to use this wine cooler with an extension cord or
power strip. Please ensure that the appliance is plugged directly into
the electrical outlet.
• When positioning the wine cooler, ensure that there is at least a 2”
clearance at the sides and a 4” clearance at the back of the cooler.
This will allow for adequate ventilation of heat from the back of the
cooler.
• This cooler is designed to store wine bottles. If food is placed inside,
ensure that there is sufficient airflow between items. Also note that the
temperature range for this cooler is optimized for wine and beverage
storage. Perishable food items may require a different storage
environment.
• Do not place hot food or drinks into the wine cooler before they cool
down to room temperature.
• Close the cooler door immediately after putting in any items so the
inside temperature will not rise dramatically.
• Avoid subjecting the cooler to external heat sources or direct sunlight.
• For a stable installation, make sure the cooler is placed on a flat, level,
and solid surface.
• Make sure that the surface on which the wine cooler is placed is strong
enough to hold the wine cooler once it is fully loaded with wine bottles.
• Do not place any other appliances on top of the wine cooler.
• The wine cooler is an electrical appliance. To avoid injury or death from
electrical shock, do not operate the wine cooler with wet hands, while
standing on a wet surface, or while standing in water.
• Do not use outdoors or in wet or moist conditions.
• Do not turn the cooler upside down, on its side, or 45° or more off level.
• Never pull the power cord to disconnect it from the outlet. Grasp the
plug and pull it from the outlet.
• Never lift or carry the wine cooler by the power cord.
• Keep the power cord away from heated surfaces.
• This wine cooler is designed for household, non-commercial use only.
• Do not plug this cooler into the power socket before set up is completed.
2
• An empty cooler can be dangerous for children. If disposing of the
cooler remove gaskets, latches, lids and the entire door from your
unused appliance, or take other action to ensure that children cannot
become trapped inside.
• If your model of wine cooler is equipped with a lock, take care to keep
the keys away from children.
• Do not cut or remove the third prong (the grounding prong) from the
power cord.
• The cord should be secured behind the unit and should not be left
exposed or dangling.
• Do not move this cooler without emptying it of its contents and securing
the door in a closed position.
1. Specifications
Model
Voltage/frequency 115V/60Hz
Power 75 W
Rated Current 1.0 A
Net Weight 7.8 KG
Protection Type I
Climate Type
TWR125SS
SN • N
2. Parts and Features
Note: The above diagram is for reference only- your specific model of wine
cooler will likely differ slightly from the diagram above (in light placement,
bottle capacity, etc,) but its operation will be essentially the same.
3. Operation
The Temperature Control
Your wine cooler uses a manual control to adjust the thermostatAdjust the temperature using the dial located in the upper right hand corner
inside the wine cooler.
Interior Light
3
Loading...