PDW45E
Countertop Dishwasher
Owner’s Manual
This owner’s manual provides
instructions on safe installation,
use, and maintenance.
Please read it carefully and
save it for reference.
Thank you for purchasing this Koldfront product. We are glad you chose us. We believe that your purchase of
this product opens a relationship between you and Koldfront. We will provide the customer support ne eded to
nurture that relationship.
This manual contains important information regarding the proper installation, use and maintenance of your
product. Following this manual will ensure that your product will work at its peak performance and efficiency.
Please save the original product packaging in case you need to safely transport your product.
For Your Records:
Please write down the model number and serial number below for future referen ce. Both
numbers are located on the ratings label- which is usually on the back of your unit- and are
needed to obtain warranty service. You may also want to staple your receipt to this manual
as it is the proof of your purchase, and is also needed for service under your warranty.
Model Number: __________________________________
Serial Number: __________________________________
Date of Purchase: _________________________________ _
To better serve you, please do the following before contacting customer service:
• If you received a damaged product, immediately contact the dealer that sold you the product.
• Read and follow this instruction manual carefully to help you install, use and maintain your product.
• Read the troubleshooting section of this manual as it will help you diagnose and solve common issues.
• Visit us on the web at http://www.edgestar.com for product guides, additional troublesho oting
resources and up-to-date information. If you need service, our friendly customer service
representatives are available via email at service@edgestar.com or by telephone at 1 (866) 319 -
5473.
Table of Contents
Page
Components--------------- ----------------------------------------------------------------------------------------------- 1
Important Safety Instructions---------------------------------------------------------------------------------------- -2
Installation Instructions -------------------------------------------------------------------------------------------------3
Water Pressure-----------------------------------------------------------------------------------------------------------3
Disconnecting the Dishwasher----------------------------------------------------------------------------------------4
Control Panel and LED Display---------------------------------------------------------------------------------------4
Loading Your Dishwasher- -------------------------------------------------------------------------------- ------------ 5
Preparing Your Dishes for Washing----------------------------------------------------------------------------------5
Detergent and Rinse Aid Use------------------------------------------------------------------------------------------6
Operating Instructions-------------------------------------------------------------------------------------------------- 7
Technical Data and Troubleshooting---------------------------------------------------------------------------------8
Limited Warranty----------------------------------------------------------------------------------------------------------9
Components
Front view
1
2
3
Note that your dishwasher may vary slightly
in appearance from this unit. The
functionality should be the same.
4
5 Back view
6
9 8 7
Inside view
10
11
12
13 14 15
1. Door lock button 6. Power light 11. Filter assembly
2. Digital LED display 7. Power button 12. Rinse aid dispenser
3. Program button 8. Lower front panel 13. Water inlet connection (Inlet valve)
4. Start/pause button 9 . Door 14. Drain hose connection
5. Delayed start button 10. Spray arm 15. Power Cord
1
Important Safety Instructions
WARNING
When using your dishwasher, follow basic safety precautions, including the following:
→ Please read the installation and operating instructions carefully before using the dishwasher for the
first time.
→ These instructions contain very important information with regard to installation, use and maintenance
of your dishwasher.
→ The manufacturer will not be responsible for problems caused by ignoring the se safety and cautionary
instructions.
→ This dishwasher is designed for normal househol d use.
→ Do not use the dishwasher for industrial and commercial use, or any other purpose.
→ This dishwasher must be plugged directly into a grounded electrical outlet (Do not use an extension cabl e
or cord.)
→ Only suitable household utensils should be placed in the dishwasher. (Please avoid utensil s that are
not heat-resistant, are decorated metal, etc.)
→ Keep detergents away from children.
→ If your hot water temperature in your pipes exceeds 149˚F adjust the your home’s water heater setting. If
your hot water temperature exceeds 149˚F, the dishwasher must be connected to a cold water so urce.
→ Do not use any kinds of solvents in your dishwasher. They may cause an explosion or fire.
→ Do not spray water into the appliance. This may cause the failure of electrical parts or electric shock.
→ Do not push down or sit on the door when the door is opened. This may cause deformation of the door
or a risk of personal injury.
→ Do not use dishwasher detergent for hand washing. Dishwashe r detergent should b e used for
dishwashers only.
→ If the power supply cord is damaged, it must been replaced by a technician, service agent or a
similarly qualified person.
→ This appliance should be positioned so that the plug is accessible.
→ The appliance is not intended for use by young children or infirm persons without supervision.
→ Young children should be supervised to ensure that they do not play with the appliance.
→ Dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid
contact with skin and eyes and keep children away from the dishwasher when the door is open.
Check that the detergent receptacle is empty after completion of the wash cycle.
→ Connect the dishwasher to your water source using new hoses. Old hoses should not be re-used.
WARNING
Instructions below advise about a risk of fire, electric shock, or injury to persons.
Electrical Instructions:
An electrical supply of 120 volts AC only, 60Hz is required. Make sure that a suitable electrical outlet is located
close to the dishwasher. For your personal safety, the appliance must be gro unded.
2
Installation Instructions
Remove All Packing Materials Carefully
1. The water inlet hose from the machine terminates in a ¾” female connector. Connect the hose to ¾” male
connector. We suggest that your water outlet have a stopcock close by in the pipe. It is best to connect the
machine to a hot water supply, but a cold water supply will also suffice. Connect the straight connector from
the inlet hose to the water supply securely. Connect the other end (bent connector) to the water inlet valve
at the back of the dishwasher cabinet. Do not over-tighten the hose connections – this may damage the
threads.
Note: If you so desire, you may connect the water inlet hose on to the kitchen sink tap. Connect the water
supply hose to a threaded ¾” quick-connect adapter and make sure that it is fastened tightly in place.
2. Prepare the drain hose so that it is hooked at the end furthest from the dish washer. Use the supplied
plastic U-bend fitting provided for this purpose. The end of this should be dropped into a drainage
standpipe, the maximum height of which should be no more than 6” above the base of the dishwasher. To
allow for an air gap around the end of the drain hose, the diameter of the standpipe should be at least 30
mm. Connect the other end of the drain hose (L shaped) to the drain port connection at the back of the
dishwasher cabinet. Tighten the drain hose end on to the drain port using the metal clip included in the
package.
Note: You may also drain this dishwasher into a sink- just make sure that the drain line is secure- so that
water does not leak onto your counter or floor.
Water connection Back view
Inlet valve
Inlet hose
Drain hose Power cord
3. Turn on the water supply and check for leaks. If leaks are located, immediately shut off the water supply
and check the hose connections. Tighten the connections if necessary.
4. If for any reason you are unable to stop the leak yourself please seek advice from a qualified plumber.
5. Make sure there is an electrical outlet within easy reach of the machine. The power cord is about 83” long.
6. The dishwasher must be installed on a solid, level surface.
7. To level the dishwasher, adjust the 4 leveling legs (feet) under the dishwasher. Unscrew them to make
them longer. Screw them in tighter to make them shorter.
Water Pressure
The machine can be used with a hot water supply or cold water supply. A hot water supply is preferred.
For best operating results, incoming water pressure should be between 0.03～1Mpa. The incoming water
supply for the dishwasher is monitored by a ‘low water pressure switch’, so if the water pressure is too low (or
if there is no water supplied to the machine), the dishwasher will stop.
For Best Results:
3
Your dishwasher cleans by spraying a mixture of hot clean water and detergent (under pressure) a gainst the
soiled surface of dishes. The water is pumped through a rotating spray arm, drained through a filter remo ving
food and soiled particles and then pumped back through the spray arm.
Soiled water is pumped out and replaced with clean water at the end of each cycle . For best cleanin g results,
the water temperature must be at least 131˚F. To prevent dishwasher damage, the temperature of the
incoming water supply should not exceed 149˚F.
NOTE: “Hard water” will adversely affect the wash performance of your dishwasher. Hard water will also
contribute to “lime” (white filmy substance) deposits and/or “scaling” on the stainless steel surface of the
dishwasher tub and the heater element (located in the sump underneath the removable filter screen). To
minimize the above conditions, we recommend periodically rinsing the inside of the dishwasher (while empty)
with 1 cup of white vinegar (at least once a week).
Disconnecting the Dishwasher
→ Turn off the water supply at the stopcock.
→ Disconnect the power supply cord.
→ Disconnect the inlet hose assembly from the water supply. When the dishwasher is not in use, you can
store the hose on the hang bracket located on the rear wall of the dishwasher cabinet.
→ Appliances that are being thrown away should be made unusable. Pull off the plug and ma ke the door lock
and latch unusable
! Important!
Once you open the water supply line, (even if it is closed immediately thereafter) the water inlet hose will be
pressurized. This means there may be some water splashed out when the hose is disconne cted. Take the
necessary precautions.
! Caution!
Do not let children disconnect (or use, unsupervised) the dishwasher. Close supervision of children is always
important around appliances.
Control panel and the LED display
1. Digital L
2. Program button：Press the button to select the washing program
3. Delayed start button:：Press this button to set the number of delayed hours
4. Start/pause button：Press this button to start or pause the dishwasher. Once
5. Power light：This light comes on when the unit is on.
6.
ED display window ： Displays washing program indicators, error codes
for the beginning of the washing cycle. You can delay the start of washing up
to 24 hours. Each press on this button delays the start by one hour.
pressed, one of the programs will blink. 10 seconds later, the cycle starts.
Power button：Turns the unit on or off
4
Loading Your Dishwasher
→ 4 Dinner Plates
→ 4 Soup Plates
→ 4 Dessert dish
→ 4 Saucers
→ 4 Cups
→ 4 Tea spoons
→ 1 Oval platter
→ 1 Small serving dish
→ 1 Dish
→ 4 Glasses
→ 4 Soup Spoons
→ 4 Forks
→ 4 Knives
→ 4 Dessert Spoons
→ 2 Serving Spoons
→ 1 Serving Fork
→ 1 Gravy ladle
The dishwasher is designed to receive a standard 4 piece plate setting consisting of the above.
NOTE: for ease of loading/unloading large size dinner plates from the dish rack it may be necessary to
(temporarily) remove the cutlery basket. When loading/unloading is complete, return the cutlery basket to its
original position.
Preparing Your Dishes for Washing
Scrub off all solid food particles from the dishes.
→ Remove excessive quantities of oil or grease.
→ Empty any liquids from glasses and cups.
→ NOTE: Dishes with dried-on foods are more difficult to wash and may not come clean in a normal wash
cycle.
→ Arrange all items with recessed or curved sections on a slant to drain water away.
When loading items to be washed:
→ Load sharp items so that they are not likely to damage the door seal.
→ Load sharp knives with the handles up to reduce the risk of cut-type injuries
→ Do not load plastic items unless they are “dishwasher safe”.
5
→ Do not load glasses over the dish rack pins. Glasses loaded over dish rack pins are not properly
supported and are likely to get damaged.
→ Items with wooden or bone handles and items joined together with glue are unsuitable as they cannot
resist hot water.
→ Do not touch the heating element during or immediately after use.
→ Do not operate your dishwasher unless all enclosure panels are properly in place.
→ Do not tamper with the controls.
→ Do not abuse, sit on, or stand on the open door or dish-rack of the dishwasher. The machine may topple
over.
→ Protect the cables and hoses from high temperatures.
→ To reduce the risk of injury, do not allow children to operate or play with the dishwasher.
Detergent and Rinse Aid Use
The indention for the detergent
Use only detergent specifically made for use
in dishwashers, as other types can cause
over-sudsing. If your detergent is old and/or
lumpy, throw it away. Old detergent loses its
washing power. Lumpy detergent won’t
dissolve.
Please put the detergent in the indention on
the inner side of the door.
How much detergent to use
That depends if your water is ‘hard’ or ‘soft’. Generally, hard water requires more detergent to get dishes
clean while soft water requires less detergent. The recessed detergent indentio n located on the inside door
panel will hold approximately 12g of detergent. Follow the detergent manufacturer’s guidelines for appro priate
detergent quantity.
Using a Rinse Aid
Add the rinse aid into this
dispenser.
You can help prevent unsightly spots on
dishes and glassware and reduce drying
time by using a rinse aid. A rinse aid is
specially formulated to rinse away food
and detergent residue that can be left
behind on your dishes. Used regularly, a
rinse aid will automatically provide you
with cleaner dishes every time you wash.
6
To fill the rinse aid dispenser, unscrew the dispenser cap located on the inner door (or on the back of the tub,
depending on your model). Add the rinse aid slowly into the dispenser until it just reaches the bottom of the
filling cap inside the dispenser opening. Then replace the cap.
Operating Instructions
To operate the dishwasher:
Make sure the inlet and drain hoses are correctly and securely connected.
1. Push the door release button to open the door.
2. Check to make sure that the filter (bottom of the machine, above the heating element) is in the right
position.
3. Place the dishes on the dish rack and the cutlery inside the cutlery basket.
4. Check to make sure that the rotating spray arm can turn freely all the way around. If necessary,
remove any obstacles.
5. Fill the detergent in the recessed area on inner door panel. (12g maximum).
6. Close the door securely
7. Open the water supply.
8. Push the power (on/off) button.
o Button pushed in = power on
o Button pushed in = power off
The LED display and the power light will illuminate indicating the machine is receiving po wer.
9. Select the desired program by press the program button. The LED will display the washing code you
select. The LED will display the default washing mode when it receives power.
o P1= Intensive Wash
o P2=Normal Wash
o P3=Rapid Wash
o P4= Eco Wash
o P5=Pre-Wash
10. Press the start/pause key to start. The LE D will flash the program selected and the washing status
during operation.
11. At the end of the cycle the dishwasher will stop running, the LED will stop flashing, and the dishwasher
will beep. The LED will turn to black (off) when the machine does not run or operate for 10 minutes or
more. The power light will remain illuminated until the power (on/off) button is switched off.
12. The dishwasher is designed to stop if the door is opened accidentally during operation.
7
13. You can select another program during operation by pressing the start/pause key first, then pressing
the program key to the desired program, and pressing the pause/start key again to start the new
program.
14. After washing, dishes sh ould be allowed to cool down for about 15 minutes so they are not too hot to
handle. Dishes will cool more quickly if the door is opened slightly.
15. After unloading the dishwasher, remove the filter, clean off any bits of food, and put the filter back into
place.
NOTE: At the beginning of each cycle, the dishwasher always starts in the “drain” mode. This is because th e
drain pump always retains a small amount of water (in the sump) from the previous cycle. This is necessary to
keep the pump primed. Therefore, do not be alarmed if you see a small amount of water being pumped out of
the drain hose prior to the start of the regular wash cycle. This is normal.
Program Summary/Selection
Intensive Wash
Water Temperature: Wash129/Rinse264°F
Program Duration + Heating Time: 125minutes
Water Consumption: 11 quarts
Normal wash::
Water Temperature: Wash125/Rinse152°F
Program Duration + Heating Time: 130 minutes
Water Consumption: 11 quarts
Rapid wash:
Water Temperature: Wash120/Rinse130°F
Program Duration + Heating Time: 70minutes
Water Consumption: 10 quarts
Eco Wash:
Water Temperature: Wash129/Rinse264°F
Programme Duration + Heating Time: 120 minutes
Water Consumption: 11 quarts
Pre-Wash :
Water Temperature: Incoming Water Supply
Programme Duration Time: 12 minutes
Water Consumption: 5.7 quarts
(Note: the washing time may vary according to the incoming water temperature and the ambient
temperature).
Technical Data and Troubleshooting
Technical data
Power input
Outer dimensions (HxWxD)
Weight
Max. Water Consumption
Water pressure
Controls
Detergent dosage
1160W
17.1”x18.9"x22.5"
50 pounds
2.75 gallons
0.03~1MPa
Digital
12g
8
Power input
Outer dimensions
(HxWxD) 17.1x18.9"x22.5"
Weight
Max. Water Consumption
Water pressure
Controls
Detergent dosage
1160W
50 pounds
2.75 gallons
0.03~1MPa
Digital
12g
Error codes
Your dishwasher has an error code display function. If the appliance malfunctions, an error code will often be
shown in the LED display.
CODE MEANS POSSIBLE PROBLEM
E1 Abnormally long water fill time Low water pressure
E2 Abnormally long water drain time The drain line is too long or rises too high
E3 Abnormally long water heat time Incoming water temperature too cold, water heater
malfunction, or water heater sensor malfunction
E4 Internal water level too high Water pressure too high, or drain malfunction
9
Troubleshooting
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Dishwasher will not start * Dishwasher not receiving * Check electrical connection
electrical power. or fuse/circuit breaker.
* Door is unlatched. * Close and latch door.
* Dishwasher not level. * Level unit.
Dishes not clean
reaches all surfaces.
* Improper loading * Arrange dishes so spray action
* Do not overload dishwasher.
* Spray arm not rotating freely * Check spray arm to make sure
nothing (i.e. cutlery) is
obstructing spray arm rotation.
* Check if filter screen has become
dislodged and is obstructing spray
arm rotation.
improper detergent being used
or cracked.
* Not enough detergent and/or * Use more dishwasher detergent
. * Do not use detergent that is hard
* Use only a recommended
dishwasher detergent.
* Improperly prepared dishes. * Excess food and liquids
before loading.
should be removed from dishes
due to improper installation. Inlet hose.
*The filter is out of place * Make sure the filter is in the correct position
Chipped or broken * Improper loading of dishes. * Do not overload the dish rack. Load
glassware
Water remains in bottom * A small amount of water * This is necessary to keep the
(in sump area) is normal. pump primed and is drained
automatically at the beginning
of each cycle.
glasses on the bottom rack only,
* Water inlet hose kinked/bent * Eliminate kink or bend from
* Excessive amount of water; * Allow dishwasher to complete
cycle not completed. full cycle.
Limited Warranty
This product is warranted by Richlund Ventures to be free from defective workmanship and materials for the first year
following the date of original purchase. Replacement parts will be supplied free of charge for the first year following the
date of original purchase. Labor will be performed free of charge for the first 90 days following the date of original
purchase.
WHAT IS COVERED:
This warranty applies to the original purchas er onl y , a n d on l y cove rs defec t s in wo rkmanship experienced during
operation of the product under normal service, maintenance, and usage conditions. This warranty applies to the purchase
and use of this product in residential settings within the United States of America.
WHAT IS NOT COVERED:
The following limitations apply to the coverage of this warranty:
Optional accessories, attachments, and appearance items are excluded from warranty coverage, as is shipping damage,
and any damage caused by improper voltage or any other misuse, including abnormal service, handling, or usage.
This warranty does not cover normal wear and tear on parts or replacement of parts designed to be replaced, e.g. filters,
etc.
10
This warranty does not cover service trips to deliver, pick-up, repair, or install the product, or to instruct in proper usage
of the product.
Damages or operating problems resulting from abuse, operation outside environmental specifications, uses contrary to
instructions provided in the owner’s manual, accidents, vermin, fire, flood, improper installation, unauthorized service,
acts of God, unauthorized installation or modification, or commercial use are excluded from warranty coverage.
This warranty does not cover labor incurred 91 days or more after the date of original purchase.
This warranty does not cover use of the product in a commercial setti ng.
DESCRIPTION OF WARRANTY SERVICE:
All defective product components covered by this warranty will be repaired or replaced, at Richlund Ventures’ option,
free of charge on a mail-in basis to Richlund Ventures’ authorized repair facility during the first 90 days from the date of
original purchase.
All defective product components covered by this warranty will be repaired or replaced, at Richlund Ventures’ option, on
a mail-in basis to Richlund Ventures’ authorized repair facility during the time period beginning on the 91
st
day from the
date of original purchase and ending one year from the date of original purchase. During this time period, parts will be
supplied free of charge, but labor charges will apply.
All replacement parts and units will be new, remanufacturered, or refurbished.
All products and components replaced by Richlund Ventures under warranty service become the property of Richlund
Ventures.
OBTAINING WARRANTY SERVICE:
Contact Richlund Ventures for troubleshooting assistance and warranty service authorization at 1-866-319-5473. Please
have your order receipt available to confirm the date of purchase.
Once a Richlund Ventures authorized representative has confirmed that your product is eligible for warranty service, the
product must be returned to a Richlund Ventures authorized repair facility.
The purchaser is solely responsible for prepaying all shipping related costs to and from the repair facility.
Richlund Ventures is not responsible for damage resulting from shipper mishandling or improper packaging.
Do not return defective product to the place of purchase.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXP R ESS OR IM P L IE D, INCLUDING WITHOUT
LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO
THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE
EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS DISTRIBUTORS SHALL
BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF
ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY OTHER
DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. SOME STAT ES D O NO T ALLOW THE
EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER
RIGHTS THAT VARY FROM STATE TO STATE.
11
Richlund Ventures, Inc.
Box 81336
Austin, Texas 78708-1336
Toll Free: 1-866-319-5473
Loading...