ECS TL10RE series User Manual

Download

MODEL:TL10REx

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Caution:

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority

to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation

RF Exposure Information (SAR)

This device meets the government’s requirements for exposure to radio waves. This device is

designed and manufactured not to exceed the emission limits for exposure to radio frequency

(RF) energy set by the Federal Communications Commission of the U.S. Government. The

exposure standard employs a unit of measurement known as the Specific Absorption Rate, or

SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard

operating positions accepted by the FCC with the EUT transmitting at the specified power level in

different channels. The highest SAR value for the device as reported to the FCC is 1.28 W/kg

when placed next to the body.

Attention: Teachers, Parents

and Adult Supervisors

This product is an educational tool designed for school children,

ages 6 and up. There must be supervision by an adult on

school children under 10 when using this Intel Classmate PC -

Convertible. It is a must to have a thorough explanation to

students on safe and proper handling of the Intel Classmate PC

- Convertible, power supply, battery pack, and power cord.

Be sure to keep the power cord away from younger children

Please ensure that students understand the following:

! As with all electrical products, precautions should be observed

during handling and use to prevent electric shock. The power supply (adapter) should not be handled by the children.”

! Emphasize to students that this device is an educational tool and

not a toy. The computer, power supply, battery pack or power cord should not be dropped, crushed, stepped on or otherwise abused.

! Ensure students understand the safe and proper handling of

power cord and power supply. Misuse could result in serious injury.

! The teacher, parent or adult supervisor should periodically

inspect the computer; power supply and power cord for damage and replace it, if necessary.

! Students should report any damage or loose parts to their

teacher, parent or adult supervisor, immediately.

! Do not leave the PC plugged in or “on” when enclosed in a

non-vented container, such as a school backpack, as overheating may occur.

! It is recommended that students should take a 5 minute break

every 30 minutes of use.

Safety Precautions

The following are lists of precautionary measures the students

must understand before using this computer inside the

classroom or home environment:

1. Do not place near the fire or other sources of heat.

2. Do not expose to magnetic fields.

3. Do not expose to direct sunlight.

4. Do not expose to rain or moisture.

5. Do not place heavy objects to add heavy pressure on

the computer.

6. Do not drop the computer.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT

TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE

INSTRUCTIONS.

Contents

1. Getting to know your computer!""""""""""""""""""""""""""""""""""""""""""""""""!#!

Package contents!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!#!

Separating your tablet-laptop!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$!

Docking your tablet!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$!

Layout!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!%!

Tablet Views!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!%!

! Front!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!%! ! Back!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!&! ! Left (I/O cabinet)!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!'! ! Bottom!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!'!

Keyboard Duck Views!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!(!

! Connectors!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!(! ! Shortcut keys!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!)!

2. Using your computer!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$!

Powering ON/OFF!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!*!

Powering on your computer!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!*!

Powering off your computer!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!*!

Putting your tablet into sleep mode!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!#+!

Waking up your computer!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!#+!

Locking or unlock the screen rotation!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!##!

Basic touch screen operations!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!##!

Digital pen operations!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!#%!

3. Windows Interface!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!#%!

Start Screen!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!#&!

Desktop!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!#'!

If you want to start your computer to skip the Start screen and to

directly open the Desktop, see p.24.!""""""""""""""""""""""""""""""""""""""""""""""""""""""""!#'!

Adding Desktop to the Start screen!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!#(!

Customizing your taskbar!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!#(!

The Charms menu!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!#)!

All Apps!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!#,!

Switching back to Start screen!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$+!

Start button!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$+!

Start menu – Power user menu!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$+!

4. Setup and Connection!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!&&!

Setup Your Microsoft Account!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$$!

Setup your Start screen!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$$!

Adding an App!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$%!

Removing an App!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$%!

How to Boot to the Desktop directly!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$&!

Wireless LAN!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$'!

Enabling wireless connection!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$'!

Connecting to a wireless LAN!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$'!

Micro SD Card Slot!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$(!

To insert your micro SD card!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$(!

To remove your memory card!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$(!

Installing the SIM card!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$(!

Connecting an External Device!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$)!

Connecting to the USB port!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$)!

Connecting to the HDMI port!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$*!

5. ! Battery!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!&'!

Charging your battery!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$,!

Inspecting your battery status!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$,!

By opening the Charms!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!$,!

By inspecting the taskbar!""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!%+!

Approximate status of your battery!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!%+!

6. Windows Help and Troubleshooting!""""""""""""""""""""""""""""""""""""!(&!

Windows Help!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!%$!

Troubleshooting!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!%$!

7. Specification!"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""!()!

1. Getting to know your

computer

This chapter provides an overview of the tablet, including the locations of

the connectors and controls, tablet features, and accessories.

Package contents

Carefully unpack your box and take out the items listed as below. If any

of the items is missing or damaged, contact your dealer immediately:

• One tablet

• One keyboard docking

• One stylus • One AC adapter

• One warranty card • This manual

Separating your tablet-laptop

1. Set your tablet laptop on a stable surface.

2. Hold the screen and push down the blue

latch.

3. Detach the screen by pulling it upward

Note: Before disconnecting the tablet from your keyboard dock, make

sure you have disconnected your USB device from the dock,

especially for storage devices.

Docking your tablet

1. Hold your tablet with the button

side facing the dock.

2. Gently press and insert the

tablet into the docking

connector on the dock.

3. When you hear a click sound,

it means the tablet is

successfully docked.

Layout

Tablet Views

! Front

No.

Name

Function

Light sensor

It detects the brightness of the environment.

Microphone

Mainly for sound and speech recording.

Front facing

camera

Often for taking self-portraits as well as for video conferencing.

Digital pen

slot

This is where you can rest and charge the attached digital pen (optional).

Speaker

The sound system has two speakers for playing music, notification sounds, and other audio data.

Windows

button

Switches the screen between the Start screen and the previously opened app/program.

I/O cabinet

See page 5 for details.

Touchscreen

It is a see-touch device: You look at it and also touch it with your fingers to control the tablet.

! Back

No.

Name

Function

Power lock

Push here to power on/off or lock on/off your

tablet.

Volume up/

down

Press here to increase or decrease the sound

volume.

Rear facing

camera

The camera is mainly used when you are taking

photos or recording videos.

Screen

rotation lock

Push here to active or cancel the screen rotating

function.

! Left (I/O cabinet)

No.

Name

Function

Headphone

connector

Here you can plug in a standard headphone.

Micro SD card

slot

This is where you can insert a Micro SD memory

card.

USB port

Here you can plug in a USB device.

HDMI port

This is where you can connect your HDMI

external screen.

Power port

This is where you plug in the adapter to charge

your tablet.

SIM card slot

This is where you plug in your SIM card.

! Bottom

No.

Name

Function

Docking

Connector

A connector to the keyboard dock

Keyboard Duck Views

! Connectors

No.

Name

Function

Docking

Connector

A connector where you docking your tablet.

Touchpad

Here is the touchpad that you can use it as you are using a traditional mouse.

USB 2.0 port

Here you can plug in a USB device.

! Shortcut keys

You can access certain system settings quickly by pressing the

appropriate function keys.

Press both the Fn key and One of the following shortcut key at the same

time to perform your desired function.

Enable/disable the Airplane mode to turn off/on all wireless communication.

Allows you to select your display mode (an external monitor required).

Puts your computer into sleep mode.

Decreases the display brightness.

Mutes/unmutes the audio output.

Increases the display brightness.

Decreases the volume level.

Enable or disable the touchpad.

Increases the volume level.

2. Using your

computer

Powering ON/OFF

Powering on your computer

1. If this is the first time you turn this

computer on, connect the AC

adapter and fully charge the

battery.

2. Press the power button.

3. A logo will appear when the

system is powered on.

Powering off your computer

• Save all your data before powering your computer off.

To power off your system, you can do one of the following:

A. By Charms

1. Slightly swipe from the right edge of the screen. This opens the

Charms menu. (For more about the Charms menu, see page 17)

2. Click Settings from the menu, and

you will see a menu as shown on the

right,

3. Click Power icon, and select Shut

down.

B. Using the power button

Press and hold the power button for at least four seconds, and you

will see an instruction appear in the middle of the screen, which is

as shown below.

Slide your finger on the screen downward, and the system will

power off itself. If you want to cancel it, just slide your finger

upward

C. Using the Start button

In the Start

screen and

Desktop, you

can move

your cursor

to the low left

corner. The

Start button

will shows

itself. Right

click the

button, and

the start menu will pop out

#+!

From the lower part the menu, select <Shut down or sign out> and

then <Shut down>

Putting your tablet into sleep mode

When you will be away from your computer for a short time, put the

computer to sleep.

Do one of the following:

• When the keyboard is attached, close the display panel or press Fn +

F2.

• Press the power button.

• Open the Charms and then select <Settings> → <Power> → <Sleep>.

• Right click the start button and then select <Shut down or sign out> →

<Sleep>

Waking up your computer

Note: It is recommended that you put your computer to sleep before you move it. Moving your computer while the hard disk is spinning can sometimes damage the hard disk, causing loss of data.

Do one of the following:

• Press the power button.

• Press the Windows button.

##!

Locking or unlock the screen rotation

You can find the rotation lock button on the left end of the

screen, as shown on the left.

A first press on the button can lock the screen to keep it

from rotating when you tilt the tablet. And a second press

can unlock the function.

Basic touch screen operations

The monitor is not only a touch screen, but actually also is a tablet. You

can use your fingers or a touch pen to perform many actions on it.

• Don’t use sharp objects to touch the screen. Or, the screen may be

damaged or scratched.

• Don’t touch the touch screen with a conductive material. It may cause a

malfunction.

• The supporting functions are application dependent.

Gesture name

Explanation

Tap

Touch once on an item to start an app, open a

link, or perform an optional function. This is

similar to a left-click with a mouse.

#$!

Double-tap

Slightly press twice with your finger to select

an item.

Press and hold

Press and leave your finger on an item. This

brings up detailed information or opens a

menu with more options for the item. This is

similar to a right-click with a mouse.

Pinch

Move two fingers together or apart while

touching the screen. This is to zoom in and out

on visual apps, such as pictures and maps.

Rotate Place two or more fingers on an item and then

turn your hand.

This enables you to turn an object. (Note:

Not all items can be rotated, depending upon

the app.)

Slide

Drag your finger across the screen.

This can scroll through lists and pages, and

can also move an object or be used to draw or

write, depending upon your apps.

#%!

Two-finger-slide

Moves up/down, left/right. This is the same

function as scrolling your mouse.

Swipe Start from any edge of the screen, and then

swipe toward the center of the screen.

Digital pen operations

Your tablet is provided with a touch pen or a digital

pen. With the touch pen, as the one shown on the

left, you can perform all the one-finger gestures

shown in the previous section.

#&!

3. Windows

Interface

Start Screen

When you turn on the computer, the Start screen is displayed,

which allows you to access many features and installed

applications (also referred to as apps) at one glance.

Apps

These bricks are the shortcuts for respective applications.

User Account

The currently used user account.

Charms

See page 17 for detailed information.

1 2

#'!

Desktop

In Windows 8.1, the Desktop is treated as an app. You can find and

activate it from your Start screen and All Apps screen.

If you want to start your computer to skip the Start screen and to

directly open the Desktop, see p.24.

Taskbar

Allows you to add toolbars that hold extra

buttons and menus.

Notification

area

Shows you the current system status and

notifications

Program area

This is where you can place a shortcut icon

for your desired application.

Charms

See page 17 for detailed information.

#(!

Adding Desktop to the Start screen

If the Desktop tile cannot be found in your start screen, you can add it to

the start screen by following steps:

1. Open the All Apps screen, as described in the section “All Apps” of

this Chapter.

2. Long touch or right click the desktop app icon.

3. A command bar appears at the bottom of the screen.

Click the “Pin to Start” option to add your Desktop tile to

the Start screen.

Customizing your taskbar

Right-click (or press and

hold using your finger) on a

blank part of the taskbar, a

pop-up menu leaps out. In

the menu, select Toolbars

and offer and you can see

following five toolbar

options:

Address

By choosing this, part of your taskbar becomes a

place for typing website addresses where you want to

visit.

Links

This adds quick access to your favorite websites listed

in your Internet Explorer's Favorites menu.

#)!

Touch

Keyboard

This is for tablet owners and can add a button that

brings a keyboard to the forefront for touch-typing on

the screen.

Desktop

This adds quick access to all your PC's resources,

allowing you to browse through files, folders, libraries,

network locations, and Control Panel menus without

opening any menus.

New Toolbar

This lets you create a toolbar from any folder's

contents.

The Charms menu

This menu consists of five options that are called charms and provide

quick access to various aspects of Windows 8.1.

To display the Charms, do one of the following:

! Move the pointer to the upper-right or lower-right corner;

! Use one finger to swipe in from the right edge of the screen; or

! Press Windows key + C.

#*!

The five charms are:

Search for a program or file. Simply enter a keyword in

the Search charm and start search.

It also enables you to perform a search within an app

or on the Web.

This charm is for you to transfer and share a picture or

file with another user.

Start

! If you are not in the Start screen, this allows you

to return to the Start screen.

! If you are in the Start screen, this allows you to

return to the previously screen, which could be

an app or the Desktop.

Device

This enables you to operate directly a desired device.

You can import pictures from a digital camera, stream

a video to your TV, or transfer files to a device listed

on the screen.

Settings

This charm enables you to perform basic tasks such

as adjusting the volume, turning off the PC, etc.

#,!

All Apps

In the Start screen, touch any blank area and slightly drag upward.

Once you move the cursor, a downward arrow appears in the low left

area of the screen, as shown below. Click the arrow.

Then

The All Apps screen will appear similar to what is as shown below.

$+!

Switching back to Start screen

For switching back to the Start screen, do one of the following:

! Move the mouse cursor to the lower-left corner, and click the

Windows icon.

! Once you move the cursor, an upward arrow will appear. Click the

upward arrow.

! Press the Windows key on your keyboard.

! Click the Windows icon in the Charms bar.

Start button

In the Start screen, move your cursor to the low left corner (or swipe in

from the left edge of the screen if you don’t use the dock keyboard), a

windows icon will show up. It is the start button. A right click on the icon

will open a quick access menu as shown below.

In the Desktop, the Windows icon in the low left corner is the start button,

and a right click on it can open the quick access menu.

Start menu – Power user menu

Followings are some of these items that are especially useful to have at

your mouse-tip:

 System: opens a window that provides every possible detail about

your machine.

 Control Panel: This is the quickest known method to get to the

desktop Control Panel.

$#!

 Search: Having the option to choose Search here saves you a trip

into TileWorld and its Charms menu.

 Shut down or sign out: Now shutting down, signing out, or

restarting is a single step — and it doesn’t require leaving the

Desktop. In its submenu, you can find commands for “Sign out,”

“Sleep,” “Shut down,” and “Restart.”

$$!

4. Setup and

Connection

Setup Your Microsoft Account

To share files or settings with other devices running Windows 8, you

need to setup a Microsoft Account.

Furthermore, if you want to download or purchase apps from the

Microsoft Store, such Microsoft Account is required.

To setup a Microsoft account

1. Open the Charms and click Settings > Change PC Settings.

2. Click Account > Your account >Connect to a Microsoft account.

3. Follow the instruction to register your account information.

Setup your Start screen

$%!

Adding an App

To add an app:

1. Open the All Apps screen.

2. Drag the top or bottom of

the screen inward, and an

option menu appears at

the bottom of the screen.

3. Touch the icon named Customize in the menu.

4. Touch the app that you want to add to your Start screen. The

available options will appear in the right side of the option menu.

5. Click “Pin to Start” to add the app to your Start screen.

Removing an App

To remove an app:

1. In the Start screen or All Apps screen, drag the top or bottom of the

screen inward. An option menu is activated at the bottom of your

screen.

2. Touch the icon named Customize in the menu.

3. Touch the app that you want to remove from the Start screen. The

available options will appear in the right side of the option menu

4. Click “Unpin from Start” to remove it from the Start screen.

$&!

How to Boot to the Desktop directly

If you want to start your computer to skip the Start screen and to directly

open the Desktop, here is how:

1. From the Apps screen, open the Control Panel.

If you're using the dock keyboard and are already on the

Desktop, right-click on the taskbar and choose

Properties, then skip to Step 4.

2. With the Control Panel open, touch or click Appearance and

Personalization.

3. On the Appearance and Personalization screen, touch or click

Taskbar and Navigation.

4. Touch or click the Navigation tab along the top of the Taskbar and

Navigation window that is open.

5. Check the box

next to < When I

apps on a screen,

go to the desktop

instead of Start>.

6. Touch or click the

OK button to

confirm the

change.

From now on, after

powering on your tablet

or closing your open

apps, the Desktop will open instead of the Start screen

$'!

Wireless LAN

Enabling wireless connection

To do this, do one of the following:

• Press Fn+F1 to activate the wireless networking function.

• Open the Charms and select Settings to open the Network

configuration page, and then toggle the Airplane mode switch to Off.

To confirm that Airplane mode is disabled, go

to the desktop and check the notification area.

If you see an airplane icon displayed on the

lower right, then Airplane mode is on.

Otherwise, wireless function is enabled.

Connecting to a wireless LAN

Once the wireless has been enabled, the computer

automatically scans for available wireless networks

and displays them in the wireless LAN network list.

To connect to your desired wireless network, click

the network’s name in the list, and then click

Connect.

Note: Some networks require a network security key or password for

connection. If necessary, ask the network administrator or the Internet

service provider (ISP) for the required information.

$(!

Micro SD Card Slot

You can utilize your micro SD cards as removable disks and

conveniently exchange data with digital devices such as a digital camera,

digital camcorder, MP3, etc.

To insert your micro SD card

1. Insert the micro SD card into the

card slot as shown below.

2. Follow the message appeared on

the screen, and choose to open

and view files.

3. A Windows Explorer runs and shows all the folders and files in the

micro SD cards, and you can save, move and delete data as you are

handling a storage device.

To remove your memory card

1. Press the card and release. The card will pop up.

2. Pull the card out by holding the end of the card.

Installing the SIM card

Attention: When installing or removing the SIM card, do not touch

the SIM card metal connectors. As a precaution,

always hold your tablet in your hand before you install

or remove the SIM card to avoid electrostatic

$)!

To install a SIM card, do the following:

1. Turn off the system

2. Open the cover of the I/O slot

3. Locate the SIM card slot. To locate the SIM card slot, see “Tablet

layout” on page 5.

4. Hold the SIM card with the metal

contacts facing up, and then

insert it firmly into the SIM card

slot until you hear a click.

5. Close the cover back.

To remove the SIM card, after you turn off the tablet, just pull the SIM

card out of the slot.

Connecting an External Device

Connecting to the USB port

Your computer comes with two USB ports compatible with USB devices.

The one on the tablet is a micro USB 2.0 port, and the other one is on the

keyboard dock.

Once you plug a USB device into one of these USB ports, Windows

automatically loads a driver for that device. After the driver has been

loaded one time, you can disconnect and reconnect the same device

without performing any additional steps.

Note: If Windows requires you to install the driver before connecting,

check the documentation provided by the device’s manufacturer before

connecting the device.

$*!

Before disconnecting a USB storage device, make sure the data transfer

between your computer and that device has finished. Click the Safely

Remove Hardware icon in the notification area of Windows to remove the

device before disconnecting.

Note: If your USB device uses a power cord, connect the device to a

power source before connecting it.

Connecting to the HDMI port

You can connect an external display

device such as a monitor, TV,

projector, etc., only if such device has

a HDMI port. By doing so, you have a

wider view when you give a

presentation or watch a video or

movie.

1. Power off the external device.

2. Locate the micro-HDMI port on

your computer.

3. Connect the small end of the

HDMI cable to the port, and the

other end to the HDMI port on the

external device.

4. Power on the external device.

When connecting a TV, you may need to configure your TV to

external device mode.

5. Select Charms menu > Devices > Second Screen. An option menu

appears as shown on the right.

6. Select a desired monitor mode.

$,!

5. Battery

Charging your battery

! You can charge your tablet directly by connecting the adapter to

the DC jack on your tablet and to a wall socket.

While system is off, it takes at least 3hrs to fully charge the battery.

Inspecting your battery status

There are mainly two ways to view your battery status.

By opening the Charms

In the Start screen or Desktop, open the Charms menu. A popup window

shows up at the down-left corner of your screen, as shown below.

%+!

In the lower-left corner is the battery status icon.

By inspecting the taskbar

In Desktop, move the cursor to the battery icon in the taskbar. A pop-up

dialog box appears and shows you the remaining battery percentage, as

shown below.

Approximate status of your battery

The battery icon reveals the approximate status of your battery, which

described as below.

Battery is fully charged

%#!

Battery is starting to drain

Battery is about to completely drain,

and you should stop using your tablet

and charge it at once.

Battery is being charged.

A battery is an expendable supply, so when using it over a long time, the

capacity/battery life is shortened. If the battery life is reduced to under

half of its initial time, we recommend purchasing a new battery.

When not using the battery for a long time, store the battery after

charging it to 30-40% of its capacity. This extends the battery life time.

%$!

6. Windows Help and

Troubleshooting

To know how to use Windows 8 properly, it is better to learn how to

use Windows by utilizing Windows Help.

Windows Help

Move the pointer on the screen to the top or bottom right edge of the

screen to view the Charm menu.

Alternatively, drag the right edge inward with your finger to view the

Charm menu.

Select Charm menu > Settings > Help.

For accessing to the most recent online Help, you need to connect

your computer to the Internet.

Troubleshooting

This section describes some common problems and suggested

solutions, and ways to recover your computer from a crash.

Be aware that the problems and solutions described here are meant

only as a guide. They are not definitive problem solving techniques.

For certain problems, you might need help from your reseller or your

service provider.

When you observe a problem, stop operation immediately, because

taking further action might result in data loss or damage. Take a note

of what the system is doing and what actions you performed before

%%!

the problem occurred. Provide detailed information to your service

provider for quicker problem resolution.

For about any problem, follow these steps:

1. Restart your tablet.

2. Check your Wi-Fi connection.

3. Reset your Wi-Fi connection.

4. Plug your tablet to a wall socket to charge it for at least one

hour.

Display problems

When I turn on the

computer, nothing appears

on the screen.

• If the screen is blank, make sure that:

- The AC adapter is connected to the

computer and the power cord is plugged

into a working electrical outlet.

- The computer power is on. (Press the

power button again for confirmation.)

• If these items are properly set, and the

screen remains blank, have the computer

serviced.

My screen goes blank while

the computer is on.

• Your power management is enabled. Do

one of the following to resume from sleep

mode:

- Press any key on the keyboard. (Cannot

be used in Tablet mode.)

- Press the power button.

- Press the Windows button.

%&!

Sleep problems

The critical low-battery error

message appears, and the

computer turns off

• The battery power is getting low.

Connect the AC adapter to the computer.

The computer enters sleep

mode immediately after

Power-on.

• Make sure that the battery is charged.

- The operating temperature may be too

hot. Move to a cooler environment and try

to wake the computer.

The computer does not

return from sleep mode and

the computer does not

work.

• Connect the AC adapter, then press the

Windows button or the power button.

• If your computer is powered-off, connect

the AC adapter first, and then press the

power button to resume operation.

Display problem

The screen is blank.

• Do the following:

- If you are using the AC adapter, or using

the battery, and the battery status

indicator is on, press Fn+F8 to make the

screen brighter.

- If the power indicator is blinking, press

the power button to resume from sleep

mode.

- If the problem persists, follow the

solution in the next problem “The screen

is unreadable or distorted.”

The screen is unreadable or

distorted.

• Make sure that:

- The screen resolution and color quality

are correctly set.

- The monitor type is correct.

%'!

Incorrect characters appear

on the screen.

• Are the operating system or programs

installed correctly? If they are installed

and configured correctly, have the

computer serviced.

Keyboard problems

After docking the tablet, the

keyboard has no response.

• Do the followings:

1. Connect the adapter to the dock.

2. Separate your tablet from the dock.

(See page 2 for details)

3. Dock your tablet again. You shall

hear a click sound when you push

the tablet into the dock.

• If the keyboard still has no response,

please contact your local dealer.

Sound problems

No sound can be heard

from the speaker even

when the volume is turned

up.

• Make sure that:

- The Mute function is off.

- The combo audio jack is not being used.

- Speakers are selected as the playback

device.

Recovery system problems

Fail to restore system

partition to factory default.

• The system partition, such as the

partition size or the drive capacity of C,

has been modified.

ECS TL10RE series User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual