Instruction Manual
Hydraulic Punch Driver 902-598
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the month and year of
purchase. Keep this manual and the receipt in a safe and dry place for
future reference.
IMPORTANT SAFETY INFORMATION
In this manual, on the labeling, and all other information provided with this
product:
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which,
if not avoided, will result in death or serious injury.
Due to continuing improvements, actual product may differ
slightly from the product described herein.
Read this material before
using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL
WARNING indicates a hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol,
indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
GENERAL SAFETY RULE
3. Service
TO WORK IN SAFE CONDITIONS WITH THIS TOOLING, IT IS IMPERATIVE
TO READ THE DIRECTIONS CAREFULLY FOR USE AND TO FOLLOW
THE INSTRUCTIONS THEY CONTAIN. IF YOU DO NOT RESPECT THE
INFORMATION WRITTEN IN THIS INSTRUCTION MANUAL THE
WARRANTY MAY BE VOIDED.
1. Work area safety
a. Keep work area clean and well-lit. Cluttered or dark areas invite
accidents.
Keep children and bystanders away while operating the hydraulic
b.
punch driver. Distractions cause you to lose control.
Please do not use or store this tool under high temperature, or one
c.
surrounded with corrosive atmosphere. Pay attention to the sealing
kits (O-Rings) becoming old and/or worn out (leaking).
2. Personal safety
Have your Hydraulic Punch Driver serviced by a qualified service technician
using only original replacement parts. This will ensure that the safety of the
Hydraulic Punch Driver Kit is maintained.
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the tool which carry important safety information.
If unreadable or missing, contact your distributor to replace.
2. This product is not a toy, keep it out of reach of children.
3. Do not slide your fingers in the dies profile.
4. Do not use the tool without punch die.
5. Do not use hands to check for leakage.
6. Do not use this tool near live circuits.
7. The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator
.
a. Stay alert, watch what you are doing and use common sense when
operating the tool. Do not use the tool while you are tired or still under
the influence of drugs, alcohol or medication. A moment of inattention
may result in series personal injury.
b. Use safety equipment. Always use safety equipment such as eyes
protector, safety cap etc to reduce the risk of personal injury.
c. Please use the tool properly. The tool with correct power will do the
job better and safer at the rate for which it was designed.
SAVE THIS INSTRUCTIONS
Loading...