Eclipse 902-385 Operating Instructions Manual

Area of application:
This tool is only designed for the use described in the operating instructions. Any other
use may result in accidents or damage of the tool.

1. Standard pliers functions: (combination, tube, flat pliers / open end wrench
Set function lever in position „open“.
Set adjustment screw for jaw opening size according to application.

2. Grip pliers functions: (tube, flat pliers)
Set function lever in position „lock“.
Set adjustment screw for jaw opening size according to application.

3. Crimp functions: (coax connectors RG 58,59,62, insulated terminals AWG 22-10
(0,5-6,0mm²), wire ferrules AWG 22-10 (0,5-6,0mm²).
Set function lever in position „lock“.
Turn adjustment screw for jaw opening size clockwise until stop, then turn 1/4 turn
counter-clockwise. Insert crimp dies.

4. Riveting function: (riveting attachment)
Set function lever in position „open“.
Set adjustment screw for jaw opening size that the 2 arrows will match.
Assemble riveting attachment und guide according to rivet size.
If handforces are too high during riveting operation, turn adjustment screw 1/4-1 turn
counter-clockwise.

Raptor RCG

902-385

Operating Instructions

Eclipse Tools

13302 Chula Rd
Amelia, VA 23002

Tel: [phone]
Fax: [phone]

e-mail: [e-mail]
Internet: www.eclipsetools.com

1. standard pliers functions 2. grip pliers functions

- 1/4

= Ø =

3. crimp functions 4. riveting function