Page 1
ECLER TECHNICAL DATA SHEET
KE Y FE AT U RE S
• 6 input channels, 2 main outputs 19” installation mixer
• Micro sensitivity level can be adjusted on the back panel
• +18V Phantom Power available in all “MIC” inputs
• Direct micro input on front panel, channel 1
• Includes a talkover assigned to “INPUT 1” with internal release time
adjustment
• Three-band tone controls for each channel, accessible with a screwdriver
• Vu-meter for the mix signal
• Two internally adjustable output levels
• Recording output
• Direct access to the mixing bus allowing you to connect another mixer and
increase the number of inputs
• Remote MUTE control affecting all inputs for connecting fire detection
systems other safety devices. Internally programmable “NO / NC” (normally
open, normally closed)
• Mono/stereo switch
APP LI C A TI ON S
• Gyms
• Licensed venues
• Restaurants
• Leisure venues
• Retail shops
• Boardrooms and conference centres
• Entertainment music playback
• Education centres
• A/V presentations
CE R TI F I CA TI ON S
EN60065:2014
EN55103-1:2009
EN55103-2:2009
2006/95/EC
2004/108/CE
1/2
SAM612T
ANALOGUE PR EAMPLIF IE RS & MIXER S
Installation Analogue Mixer
PR O D UC T O VE RV I EW
ECLER SAM612T is an installation audio mixer in standard rack format, featuring 6 MIC/LINE ST inputs + 1 ST MIX input
and 1 ST MAIN output + 1 ST REC output. Each input has a dedicated 3-band tone control, a feature which is fundamental to
get a perfect microphone mix in an installation. Input 1 includes talkover (priority) function over the mix bus and additional
front panel jack connector. Main output ST/MONO mode switch and MUTE port for external dry contact triggering.
Page 2
ECLER TECHNICAL DATA SHEET
All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or
improvements in the design or manufacturing that may affect these product specifications.
Motors, 166‐168 08038 Barcelona ‐ Spain ‐ (+34) 932238403 information@ecler.es www.ecler.com
ME C H AN IC A L DI A GR A MS
Inputs Sensitivity nom(*)/Impedance
IN 1-6 (LINE)
MIX (LINE)
IN 1-6 (MIC BAL)
0dBV/50kΩ
0dBV/10kΩ
-35dBV/>1kΩ
Input sensitivity adjust
IN 1-6 (MIC/LINE)
±15dB
Outputs Level/Minimum load
OUT
REC
0(+6)dBV*/600Ω
0dBV/10kΩ
Frequency response
LINE
MIC BAL
10Hz-50kHz -1dB
10Hz-30kHz -1dB
Harmonic distortion
LINE
MIC BAL
<0.005%
<0.04%
CMRR
MIC
>60dB@1kHz
Signal/Noise ratio
LINE
MIC BAL
>100dB
>85dB
Tone control
BASS
MID
TREBLE
100Hz ±15dB
2kHz ±15dB
10kHz ±15dB
Talkover
TIME
EFFECT
2 seconds
-30 dB
Phantom voltage
+18VDC
Mains
90-264VCA 47-63Hz
Dimensions
Panel
Depth
482.6x44mm
120mm
Weight
2.0kg
2/2
TE C H NI CA L D A TA
Loading...