Ecler PCS124 Installation And Quick Manual

Page 1
PCS124
LOUDSPEAKERS HARDWARE
Pendant Cluster Mounting Kit
INSTALLATION
QUICK GUIDE
Page 2
Important note 3
Precautions 3
Introduction 3
Installation 4
Technical specifications 7
2
Page 3
IMPORTANT NOTE
Congratulations. You now own the result of a well-designed, carefully produced manufacture. We thank you for your trust by having chosen our PCS124 mounting kit.
PRECAUTIONS
Read these instructions Keep these instructions Pay attention to all the warnings Follow all the instructions Install following the manufacturer’s instructions Only use the accessories specified by the manufacturer. In the event of any repair, contact a qualified technical service.
INTRODUCTION
PCS124 is a kit to convert eMOTUS, AUDEO103 and AUDEO106, or TRAIL103 individual units into a pendant cluster. It offers the possibility to combine from 1 to 4 of these units, cluster and hang them from the ceiling.
It is supported by a hollow bar, which allows passing through all the wires for an easy and fast installation, besides an optimal adjustment and an elegant finish. This kit is designed for indoor and outdoor installations, and it’s available in black and white colours.
3
Page 4
INSTALLATION
1. Attach the U-brackets needed to the pole: 2 x U-brackets included in the kit.
4
Page 5
2. Route the audio cables through the holes in the bar to connect the loudspeakers.
3. Screw the PCS124 to the ceiling.
5
Page 6
4. Screw the loudspeaker wall-mount brackets to the PCS124. It will be necessary 2
screws M6x30 for the AUDEO103 or AUDEO106 (left), or 3 screws M5x30 for the eMOTUS wall-mount bracket (right).
6
Page 7
TECHNICAL SPECIFICATIONS
PCS124
Construction
Stainless steel (pole), 2mm thickness Zincor (U-brackets)
Dimensions (WxDxH)
70x70x349mm
Pole diameter
40mm
Weight
1,3kg
Maximum load capacity
40 kg
All product characteristics ar e subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.
Motors, 166‐168 08038 Barcelona ‐ Spain ‐ (+34) 932238403 information@ecler.es www.ecler.com
7
Loading...