Ecler MPAGE1 User Manual [en, de, es, fr]

USER MANUAL MANUAL DE INSTRUCCIONES NOTICE D'UTILISATION BEDIENUNGSANLEITUNG

MPAGE1

PAGING STATION

INSTRUCTION MANUAL

1. IMPORTANT NOTE

1.1. Precautions 04

2. INTRODUCTION

3. INSTALLATION and CONNECTION

4. OPERATION 06

5. FUNCTION LIST 07

6. FUNCTION DIAGRAM

7. TECHNICAL CHARACTERISTICS

All numbers subject to variation due to production tolerances. ECLER SA reserves the right to make changes or improvements in manufacturing or design which may affect specifications.

1. IMPORTANT NOTE

Congratulations! You are the owner of a carefully designed and manufactured product. We would like to thank you for choosing our MPAGE1 paging station. For the maximum effectiveness of the paging station, it is VERY IMPORTANT that you read this User's Guide carefully and follow the recommendations contained herein. In order to guarantee the optimum operation of this unit, we strongly recommend that its maintenance be carried out by our Authorised Technical Services.

1.1. Precautions

The working environment should be dry and completely dust-free. Do not expose the unit to rain or water splashes, and do not place liquid containers or incandescent objects like candles on top of the unit. Any change in the configuration of the unit must be carried out by a qualified technician.

Before any work is done on the unit it should be disconnected from the power source.

2. INTRODUCTION

MPAGE1 is a real time desktop (“

paging

”) station. Connecting the paging station to equipment with a microphone input such as the pKUB, AMI2-70, MIMO54, MIMO88, SAM serial mixers, etc., you can send message in real time.

The principal features of the MPAGE1 are:

x

1 voice message activation key (PAGE) (1)

x

Goose-neck microphone (2)

x

Euroblock type balanced audio connector (3)

x

Euroblock type TRIGGER (4) connector for remote control of external equipment (contact opens while PAGE is pressed)

3. INSTALLATION and CONNECTION

Installing a MPAGE1 unit consists of the following steps:

1. Installation of audio wiring: cable balancing between the MICRO (3) connection of the MPAGE1 and the audio input of the receiving equipment (mixer, audio matrix, etc.):

Live or direct signal > Terminal + Cold or inverted signal > Terminal Ground > Terminal

The audio cable also delivers the

phantom

power required for the MPAGE1 unit to

operate and which must be supplied remotely by the receiver.

Example of pKUB connection to MPAGE1

2. Installation of TRIGGER (4) control wiring (optional): the status of the control signal of the TRIGGER connector is closed by default (at rest, PAGE (1) key not pressed) and open while the PAGE (1) key is pressed, i.e., while the message-sending process is active. The control signal is used for the remote control of certain functions of external equipment, such as to enable the MUTE function of an MIMO88 unit using one of its GPI inputs, a PRIO input on an MIMO54, a MUTE input on a SAM serial mixer, etc.

Note: the TRIGGER control signal is not a power-free contact closure; rather, it operates thanks to a circuit based on MOSFET devices. For more information, consult the technical features of the equipment.

3. Adjust the microphone level of the receiver equipment

flexo. It is supplied with an

The console (2) microphone is a non-extractable

"anti-pop"

foam windshield.

electret cardioid

type mounted on a

4. OPERATION

Once the MPAGE1 unit is connected to the receiver, messages are sent by pressing the PAGE (1) key and keeping it pressed while the voice message plays. If the receiver has a “

talkover

” function that works by automatically detecting the signal delivered by the microphone or by closing the external contact using the TRIGGER (4) connector, the sound in the areas where the message is being received will be attenuated or muted

x

while the message is being delivered if there is automatic level detection (PAGE (1) key pressed + message playing)

x

as long as the PAGE (1) key is pressed if activated by closing the contact

5. FUNCTION LIST

1. PAGE key

2. Goose-neck microphone

3. Euroblock connector, MICRO

4. Euroblock connector, TRIGGER

6. FUNCTION DIAGRAM

MANUAL DE INSTRUCCIONES

1. NOTA IMPORTANTE

1.1. Precauciones 09

2. INTRODUCCIÓN

3. INSTALACIÓN y CONEXIONADO

4. FUNCIONAMIENTO 11

5. LISTA DE FUNCIONES 12

6. DIAGRAMA DE FUNCIONES

7. CARACTERÍSTICAS TÉCNICAS

Todos los datos están sujetos a variación debida a tolerancias de producción. ECLER S.A. se reserva el derecho de realizar cambios o mejoras en la fabricación o diseño que pudieran afectar las especificaciones.

+ 16 hidden pages