Echo Bear Cat 73640-00 User Manual

Instructions

The nozzle wear plate attaches to the Wheeled Vacuum
nozzle to prevent wear of the nozzle. It is especially useful
when operating the Wheeled Vacuum on hard surfaces.

Installing nozzle wear plate:

SUBJECT: WHEELED VACUUM

NOZZLE WEAR KIT # 73640-00

FITS MODELS: ALL WHEELED

VACUUMS

WARNING

Before inspecting or servicing any part of this machine,
shut off power source, remove key, disconnect the bat­tery cables and make sure all moving parts have come
to a complete stop.

1. Raise the intake nozzle to the highest position.

2. Align the wear plate under the nozzle and adjust to the
desired location.

3. Using the wear plate mounting holes as a template
mark the locations where the self tapping screws will
be inserted.

4. Double check the location of the wear plate, and then
bolt the wear plate onto the nozzle using the self tapping
screws. If using hand tools, drill 3/16” diameter holes
before inserting the screws.

Fig. #1, installing nozzle wear plate

Manual P/N 73674-00

Rev. 111308

P/N 73640-00 - NOZZLE WEAR PLATE KIT

1

2

ITEM PART NO. DESCRIPTION QTY

1 15695-00 SCREW, 1/4 X 3/4” HWH TAPPING ZP 4

2 73675-12 GUARD, NOZZLE WEAR 1

ECHO BEAR CAT

www.bearcatproducts.com

237 NW 12th Street, West Fargo, ND 58078-0849

Phone: [phone] • Toll Free: 800.247.7335 • Fax: [phone]

E-mail: [e-mail] • [e-mail]