Instructions
SUBJECT: WHEELED VACUUM
CASTER WHEEL KITS (PN #’s
73607-00 & 76967-00)
MODELS: ALL WHEELED
VACUUMS
Installing caster wheel kit 73607-00 for
models with SN A01322 and below:
1. Remove the existing front wheels by
removing the cotter pin or push nut
holding on the front wheels.
2. Remove the old wheels and the wheel
components.
3. Slide the castor wheel assemblies onto
each axle.
WARNING
To prevent personal injury or property damage: Shut
off engine, disconnect spark plug wire, and make sure
that all moving parts have come to a complete stop
before servicing, adjusting, or repairing.
2
3
4. Secure the wheels (on serial number
A01322 and below) with the provided
cotter pin clips included with the caster
wheels.
P/N 73607-00 - WHEELED VACUUM CASTOR WHEEL KIT,
FOR SERIAL NUMBERS A01322 AND BELOW ONLY
ITEM PART NO. DESCRIPTION QTY
1 13872-00 WHEEL, 4 X 2 CASTER 2
2 15006 BOLT 3/8 X 1 GR5 HEX CAPSCREW ZP 8
3 15031 WASHER, 3/8” FLAT ZP 16
4 15368 HAIRPIN CLIP ZP # 203 2
5 15388 NUT, 3/8” NYL INSERT, NE, ZP 8
6 73671-35 WELDMENT, CASTER WHEEL MOUNT 2
4
1
6
3
5
Manual P/N 73644-00 (Revised)
Rev. 020215
INSTALLING CASTER WHEEL KIT 76967-00 FOR ALL MODELS:
1. Remove the existing front wheels and wheel components.
2. Slide the castor wheel assemblies onto each axle.
3. For models (serial number A01322 and below) without a threaded axle, place cotter pin through
hole in end of axle to secure caster wheel assembly in place.
4. For models (serial number A01323 and above) with a threaded axle, secure the wheels with the
3/8”X1” ange bolts included with the caster wheels.
2*
3
6
4
1
5
P/N 76967-00 - WHEELED VACUUM CASTOR WHEEL KIT
ITEM PART NO. DESCRIPTION QTY
1 13872-00 WHEEL, 4 X 2 CASTER 2
2 15368
3 15163-00 BOLT, 3/8 X 1 FLANGE NC 8
4 15862-00 BOLT, 5/16-18 X 7/8” HH SER/FLN 2
5 15905-00 NUT, 3/8-16 NYLOCK-FLANGE 8
6 73671-35 WELDMENT, CASTER WHEEL MOUNT 2
HAIRPIN CLIP ZP # 203 (FOR MODELS
A01322 AND BELOW)
1
237 NW 12th Street, West Fargo, ND 58078-0849
www.bearcatproducts.com
Phone: 701.282.5520 • Toll Free: 888.625.4520 • Fax: 701.282.9522
E-mail: service@bearcatproducts.com • sales@bearcatproducts.com
ECHO BEAR CAT