Echo Bear Cat 70355-00 User Manual

Instructions

SUBJECT: 3" DISCHARGE DEBRIS BAG

KIT (KIT #70355-00)

WARNING

Before inspecting or servicing any part of this machine,
shut off power source, remove key, disconnect the
battery cables and make sure all moving parts have
come to a complete stop.

MODELS: ALL 3" MODELS

DISCHARGE DEBRIS BAG INSTALLATION

1. Insert bolts into the holes located at the bottom of the
bag frame. (Inner holes for narrow body/outer holes
for wide body). Tighten bolts to bag frame with 5/16
nylock nuts.

2. Attach debris bag to frame using the velcro flaps. (See
Figure 1.1 for orientation). Make sure slots for narrow
body models are facing out from the debris bag.

3. Ensure velcro flap (6) is inserted into the slot located
between bottom bolts.

5. Align debris bag handle to be adjacent to the chipper/
shredder and lower discharge cover to secure the
handle (Figure 1.3).

6. Use handles located on back of debris bag for easy
emptying.

Figure 1.1

4. Once debris bag is attached to the bag frame, lift
discharge cover and insert debris bag frame, bolts first,
into holes located inside the chipper/shredder discharge
chute (Figure 1.2).

Figure 1.2

Figure 1.3

KIT, 3" DISCHARGE DEBRIS BAG (70355-00)

PART NUMBER DESCRIPTION QTY

15356 NUT, 5/16 NYLOCK 2

15396 BOLT, 5/16 X 7/8 HEX HD 2

30177-00 BAG, 3" DISCHARGE DEBRIS 1

70395-12 WELDMENT, BAG FRAME 1

ECHO BEAR CAT

www.bearcatproducts.com

237 NW 12th Street, West Fargo, ND 58078-0849

Phone: [phone] • Toll Free: 888.645.4520 • Fax: [phone]

E-mail: [e-mail] • [e-mail]

PN 70403-00

Rev. 060114