Echelon Lumewave EW-205 Install Manual

MOTION SENSOR INSTALL MANUAL

MOTION SENSOR INSTALL MANUAL

MODEL: EW-205-12-LU

MODEL: EW-205

Motion Sensor Assembly

Motion Sensor Assembly

1. Pull the 3 motion sensor
wires through the spacer
and mounting bracket.
(Figure 1.)

2. Secure mounting bracket
to spacer and motion sensor
with 2 washers and 2 nuts
as shown.

Mounting to Pole

Mounting to Pole

1. Drill hole into light pole
between 8’ and 10’ from
ground.
(Figure 2.)

Mounting

Bracket

Spacer

Motion
Sensor

Figure 1.

2. Connect light fixture and
motion sensor with CAT 5
cable. See wiring diagram
below.

3. Secure motion sensor to
pole with band clamp.
(Figure 3.)

Wiring Diagram

Light
Fixture

8’-10’

Figure 2

Blue

Black

Red

Figure 3

CAT 5
Cable

Blue

Black

Red

Motion
Sensor

www.echelon.com