ECG TB6560 User Manual

The 3rd Generation 5 Axis Breakout Board Set

----SSAAVVEEBBAASSE

E

Email: [e-mail] Web: http://stores.ebay.co.uk/SAVEBASE

User Manual

For

3rd Generation

5 Axis Standard & Professional Breakout Board Set

Attention: Please read the manual carefully before using the products!

The 3rd Generation TB6560 Stepper Driver Set

----SSAAVVEEBBAASSE

E

Email: [e-mail] Web: http://stores.ebay.co.uk/SAVEBASE 1

ECG Safety Statement

Easy Commercial Global is not liable or responsible for any accidents, injuries, equipment damage,
property damage, loss of money or loss of time resulting from improper use of electrical, mechanical
or software products sold on this website or other Easy Commercial Global sales resources.

Since Easy Commercial Global basically provides OEM machine assembly components to build their
machines for their own use or third party use, it is their responsibilities to maintain certify and comply
with the end user products built base on our components sold at this website or other Easy
Commercial Global sales resources.

Assembling electrical CNC machine component like power supplies, motors, drivers or other electrical
components involves dealing with high voltage like AC alternative current or DC direct current that is
extremely dangerous. Thus, more attention & essential experience and knowledge of software,
electricity, electro-mechanics & or mechanics must be necessary.

For technical questions please contact us at [e-mail] before purchase.

2012 Easy Commercial Global Technology Corporation Limited

All Rights Reserved

The 3rd Generation TB6560 Stepper Driver Set

----SSAAVVEEBBAASSE

E

Email: [e-mail] Web: http://stores.ebay.co.uk/SAVEBASE 2

1. Introduction, Features and Applications

I. Introduction

The latest 3rd generation breakout board has been upgraded to the intelligent, professional and industrial-level interface board
set by re-designing the PCB board, embedding intelligent memory chip(professional version) and upgrading the external manual
control tools (display panel and control pad).

Actually, the 3rd generation breakout board has two types of version, one is the standard version, and another is the
professional version. Compare to the standard version, the professional version mainly has two more functions than the standard
version, one is the “computer G-code recording function”, and another is the “manual programing function”. Except these two
functions, these two types of versions have no other differences.

Firstly, both of these two types of versions have upgraded their PCB boards, the re-designing the PCB board will make the
breakout board control the microstep drivers more smoothly with lower noise.

With the embedded intelligent memory chip, the professional version of this 3rd generation 5 Axis breakout board can easily
record MAX 4 Axis’(X, Y, Z, A Axis) G-code running on the CNC software (e.g. Mach3, EMC2, KCAM4, etc..) of the computer,
and then rerun the recorded G-code to make the stepper motor work without the computer any more.
Furthermore, the upgraded external manual control tools (display panel and control pad) on the professional version can be not
only used for manually controlling the stepper motor, but also manually programming the G-code. All the manually Programmed
G-code will also be recorded in to the embedded intelligent memory chip, and then we also can easily run the recorded G-code to
control the stepper motor. Considering that the computer G-code recording function is enough for all the four axis working
without computer, to avoid repeated function, the manual programming function is mainly designed for one axis to make linear
motion, therefore, the four axis cannot be manually programmed simultaneously. This function is widely used on working which
just need one Axis, such as RBI machine, Conveyor etc.

In short, the qualities and functions of the new 3rd generation advanced 5 axis breakout board are revolutionized from the
previous version. So, we believe that these two types of versions must satisfy different users for microstep drivers on CNC DIY.

II. Features

 High performance, cost-effective.
 To manually control the stepper motor, both of the standard and professional drivers have been equipped with the display

panel and control pad.

 Automatically identify both of the computer and control pad, functions of the computer and control pad can be switched

intelligently for each other without any interference.

 Display panel can real-time trail the running path of G-Code on the computer or input by the control pad, and then

completely and synchronously display the changing of MAX FOUR axis'(X, Y, Z A axis etc.) values on its screen, it is
completely synchronous with the values’ changing on the FOUR coordinates of Mach3.

 Both of the standard version and professional version are compatible with the Mach2, Mach3(Default Software),

LinuxCNC(EMC2), KCAM4 CNC Software, etc.. Besides, the professional version can automatically trail the path running
path of G-Code from the CNC software (e.g. Mach3, EMC2, KCAM4, etc...) of the computer and record the G-code into
the memory chip; Easy to repeatedly run the G-code to control the stepper motors without computer.

 The professional version also supports manual programming via the control pad, as long as input the required values on one

axis and record them in the memory chip of the driver, and then run these recorded values to drive the axis to make linear
motion, widely used on RBI machine, Conveyor and so on.

 Automatically finish Tool-settings on X, Y, Z Axis via the control pad, without the support of the computer.
 Compatible with all the 2 phase, 3 phase and 4 phase microstep drivers in the market.
 Automatic circuit protections function when the wirings between the breakout board and microstep drivers are incorrect.
 5 types of input control in manual control interface, to set limit, estop, midpoint-Setting, cutter-presetting/tool-setting etc.
 With relay output control interface, available to control the spindle motor, air pump, water pump, etc.

The 3rd Generation TB6560 Stepper Driver Set

----SSAAVVEEBBAASSE

E

Email: [e-mail] Web: http://stores.ebay.co.uk/SAVEBASE 3

 The 5th Axis(B Axis) on the breakout board can be used as a PWM signal output interface for the control of frequency

inverter and spindle via software(E.g. Mach3...), to make spindle's speed adjustable.

III. Applications

Suitable for a wide range of 2-phase and 3-phase microstep drivers in the market, such as M542, M542H, MA860H, 2MA2278,
2M542, 2M860, 2M982, DM542, DM860, 3M565, 3MA860, 3MA2290 etc.. It can be used in various kinds of machines, such as
X-Y tables, labeling machines, laser cutters, engraving machines, pick-place devices, and so on.

2. Specifications

I. Electrical Specifications (Tj = 25℃/77℉)

Input Voltage

5V DC power supply or USB port to directly get power from PC

Version Type

Standard version & Professional version

Drive Type

Pulse + Direction + Enable Signal Control

Suitable Microstep Driver

2/3 Phase Microstep Driver: M542, M542H, MA860H, 2MA2278, 3M565, 3MA860, 3MA2290 etc.

Net Weight

170g (Breakout Board + Display Panel)

Dimensions

110*100*25mm

II. Operating Environment and other Specifications

Cooling

Natural Cooling or Fan Forced cooling

Operating Environment

Environment

Avoid dust, oil fog and corrosive gases

Ambient Temperature

0 ℃－ 50℃ (32℉ － 122℉)

Humidity

40%RH － 90%RH

Operating Temperature

70℃ (158℉) Max

Storage Temperature

-20 ℃ － 65℃ (-4℉ － 149℉)

Total Weight

Approx. 275g (Breakout Board + Control Pad + Display Panel)

The 3rd Generation TB6560 Stepper Driver Set

----SSAAVVEEBBAASSE

E

Email: [e-mail] Web: http://stores.ebay.co.uk/SAVEBASE 4

III. PCB Instructions & Specifications

Figure 1: PCB Instructions & Specifications