ebm-papst GreenTech EC tubeaxial fans Catalog Page

Max. 175 m

66

38

+0,3 +0,3

+0,5

3

/h

GreenTech EC tubeaxial fans

 119 x 38 mm

– Material: Housing: GRP1)(PBT)

Impeller: GRP

1)

(PA)

– Direction of air flow: Exhaust over struts
– Direction of rotation: Clockwise,

looking towards rotor

– Possible special versions:

(See chapter DC fans - specials)

- Moisture protection

- Salt spray protection

- Degree of protection: IP65

– Connection: with flat plug 2.8 x 0.5,

optionally also with exposed
external wires

– Highlights: Fully integrated converter and

fan electronics

– Weight: 250 g

1) Fiberglass-reinforced plastic

Series ACi 4400

(40 °C)

10

)

(T

max

10

10IPC

Nominal data

Air flow

Nominal voltage

Frequency

Voltage range

Air flow

Type m3/h cfm VAC Hz VAC dB(A) Bel(A) / Watts rpm-1 °C Hours Hours

ACi 4420 ML 100 59 230 50 / 60 195...265 25 4.1 1.7 1 850 -40...+75 65 000 / 25 000 110 000 ¿
ACi 4420 N 147 86 230 50 / 60 195...265 36 4.9 2.8 2 700 -40...+75 65 000 / 25 000 110 000 ¡
ACi 4420 H 160 94 230 50 / 60 195...265 39 5.1 3.2 3 000 -40...+75 65 000 / 25 000 110 000 ¬
ACi 4420 HH 175 103 230 50 / 60 195...265 42 5.3 4.6 3 300 -40...+75 65 000 / 25 000 110 000 √

Sound power level

Sound pressure level

Sintec sleeve bearings

Ball bearings

Power consumption

Nominal speed

Temperature range

Service life L

ebm-papst standard

Service life L

ebm-papst standard

Life expectancy L

(40 °C) see page 17

Curve

ACi 4410 HH 175 103 115 50 / 60 85...132 42 5.3 4.4 3 300 -40...+75 65 000 / 25 000 110 000 √

Subject to change

Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level L
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!

A ISO 103002

W

192

2016-01

Finger guards
P. 244

Cables
P. 255